Whittier Wood Pacific 1103AFGSPc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 09/14
Pacific Nightstand
AFGSP = Glazed Spice finish
AFCAF = Caffè finish
Assembly Instructions
Model #
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended to use this product
in a commercial setting.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
1103AFGSPc;
1103AFCAFc
1-Drawer Pacific
Nightstand
1107AFGSPc;
1107AFCAFc
3-Drawer Pacific
Nightstand

1103AFGSPc; 1103AFCAFc and 1107AFGSPc; 1107AFCAFc Pacific Nightstand
Parts List
1103AFGSPc_1103AFCAFc_1107AFGSPc_1107AFCAFc —Page 2 —09/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
1103AFGSPc
1103AFCAFc
1107AFGSPc
1107AFCAFc
A
Top Assembly (attached)
1
1
Bb
Case
1
1
C
Drawer (inserted)
1
3
D
Drawer Face (attached)
1
0
E
Small Drawer Face (attached)
0
1
F
Large Drawer Face (attached)
0
2
G
Handle (attached)
1
3
O
Drawer Slides (pre-installed sets)
1
3
U
Small Adjustable Glide (installed)
4
4
X
#8 x 1-1/4" Pan Head Screw (inserted)
5
0
Y
#8 x 1-1/4" Black Screw (inserted)
3
12
ZA
#6 x 1/2" Philtruss Screw (inserted)
6
18
ZB
#6 x 3/4" Philtruss Screw (inserted)
6
18
ZC
Insert Nut (inserted)
4
4
ZE
#8 x 1-3/8" Lo-Profile Screw (inserted)
7
7
ZF
#8 x 7/8" Black Lo-Profile Screw (inserted)
4
18
ZG
#8 x 1-5/8" Machine Screw Tuscan (installed)
2
6
1107 shown in the illustrations.
Assembly Instructions
1. Place the unit at its final destination. Rotate the Small Adjustable Glides (U) on the bottoms of
the legs until the unit is level. See Figure 1.
Fig. 1
U
U