Whittier Wood McKenzie 3497GACb User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 06/20
McKenzie Occasional Table
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit, or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the shelves.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
3498GACb
3498CAFb
McKenzie Side Table
3497GACb
3497CAFb
McKenzie Accent Table
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3497GACb 3497CAFb McKenzie Accent Table
3498GACb 3498CAFb McKenzie Side Table
Parts List
3497GACb_3497CAFb_3498GACb_3498CAFb — Page 2 — 06/20
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Aa
Top Assembly
1
B
Leg
4
C
Shelf Assembly
1
D
#8 x 1-1/4" Pan Head Screw
30
(22 inserted)
E
5/16" Flat Washer
4
F
3/8" x 2-1/2" Hex Bolt
4
H
3/8" x 1" Insert Nut (inserted)
4
K
Wood Dowel (inserted)
4
L
1/4" x 20mm Insert Nut (inserted)
4
M
#8 x 1-3/8" Lo-Profile Screw (inserted)
4
N
#8 Washer (inserted)
6
O
Slotted Leveler (installed)
4
P
Leveler Adjustment Key (attached to Owners Manual)
1
3497 shown in the illustrations.

3497GACb 3497CAFb McKenzie Accent Table
3498GACb 3498CAFb McKenzie Side Table
Assembly Instructions
3497GACb_3497CAFb_3498GACb_3498CAFb — Page 3 — 06/20
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Turn the Top Assembly (Aa) upside-down on a clean, protected surface. Position the Legs (B) in
the corners so the Insert Nuts (H) face in. LOOSELY attach with four 5/16" Flat Washers (E) and
four 3/8" x 2-1/2" Hex Bolts (F) (the legs should be wobbly). See Figures 1 and 1a.
2. Turn the Shelf Assembly (C) upside-down and place the dowels into the dowel holes in the
Legs. Tighten the Hex Bolts on the Legs. See Figure 2.
Fig. 2
C
Fig. 1
E
F
x 4
x 4
F
B
B
Fig. 1a
E
E
F
Aa

3497GACb 3497CAFb McKenzie Accent Table
3498GACb 3498CAFb McKenzie Side Table
Assembly Instructions
3497GACb_3497CAFb_3498GACb_3498CAFb — Page 4 — 06/20
3. Using the pocket holes as guides, secure the Shelf (C) to the Legs (B) with eight #8 x 1-1/4"
Pan Head Screws (D). See Figures 3 and 3a.
4. Turn the table upright and place the table at its final destination. Use the Leveler Adjustment
Key (P), found in the Zip bag taped to the Owner’s Manual and Safety Guide to rotate the
Slotted Levelers (O) on the bottoms of the legs until the table is level. See Figures 4 and 4a.
Fig. 4
O
O
Loose
Tight
Fig. 9a
P
O
Fig. 3
D
x 8
D
D
Fig. 3a