Whittier Wood Addison 2018DUET User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 12/16
Addison PanelStorageBeds
DUET = Natural finish
Assembly Instructions
Model #
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Remove items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to
chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
2018DUET
Addison Queen
Panel Storage Bed
2022DUET
Addison King
Panel Storage Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Parts List
2018DUET_2022DUET — Page 2 —12/16
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
2020DUET
Queen Addison Panel Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
9
L
#8 x 1-1/4" Black Screw
24
Y
5/16" x 14mm Insert Nut (inserted)
8
ZD
5/16" Flat Washer
24
ZE
5/16" x 2-1/4" Hex Bolt
6
ZF
5/16" x 35mm Hex Bolt
18
Please note this Assembly Instruction is for either the Addison Queen Panel
Storage Bed (2018) or the Addison King Panel Storage Bed (2022).
The Parts list for each headboard follows on pages 2 and 3.

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Parts List
2018DUET_2022DUET — Page 3 —12/16
2023DUET
King Addison Panel Headboard/Footboard Kit (x1)
Part
Description
Quantity
A
Headboard Assembly
1
B
Footboard Assembly
1
C
Center Deckboard
1
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
9
L
#8 x 1-1/4" Black Screw
36
Y
5/16" x 14mm Insert Nut (inserted)
8
ZD
5/16" Flat Washer
24
ZE
5/16" x 2-1/4" Hex Bolt
6
ZF
5/16" x 35mm Hex Bolt
18

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Parts List
2018DUET_2022DUET — Page 4 —12/16
2019DUET
Queen/King Pedestal Kit (x2)
Part
Description
Quantity
D
Pedestal
1
E
Drawer Box (assembled)
3
F
Drawer Face (attached)
3
G
Left/Right Center Deckboard
1
H
Drawer Slides (installed)
3 sets
I
#6 x 3/4" Philtruss Screw (inserted)
18
J
#6 x 1/2" Philtruss Screw (inserted)
18
K
#8 x 7/8" Black Lo-Profile Screw (inserted)
18
L
#8 x 1-1/4" Black Screw (inserted)
8
M
#8 x 1-5/8" Black Screw (inserted)
24
N
#8 x 1-5/8" Machine Screw Tuscan (installed)
6
O
5/32" x 10mm Insert Nut (inserted)
6
P
Black Walnut Pull (attached)
3

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Parts List
2018DUET_2022DUET — Page 5 —12/16
2021DUET
Addison Queen Base Kit (x1)
Part
Description
Quantity
Q
Mitered End Support
1
R
Square End Support
2
S
Left Support
1
T
Right Support
1
U
Queen Trestle Rail (15-1/8")
4
W
#8 x 1-3/4" Pan Head Screw (inserted)
12
X
#10 x 3/4" Pan Head Screw (inserted)
16
Y
5/16" x 14mm Insert Nut (inserted)
18
ZA
Wood Dowel (inserted)
12
ZB
Foot Bracket (attached)
4
ZC
Adjustable Glide (installed)
4

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Parts List
2018DUET_2022DUET — Page 6 —12/16
2024DUET
Addison King Base Kit (x1)
Part
Description
Quantity
Q
Mitered End Support
1
R
Square End Support
2
S
Left Support
1
T
Right Support
1
V
King Trestle Rail (31-1/4")
4
W
#8 x 1-3/4" Pan Head Screw (inserted)
12
X
#10 x 3/4" Pan Head Screw (inserted)
16
Y
5/16" x 14mm Insert Nut (inserted)
18
ZA
Wood Dowel (inserted)
12
ZB
Foot Bracket (attached)
4
ZC
Adjustable Glide (installed)
4

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2018DUET_2022DUET — Page 7 —12/16
Tools Required: Phillips screwdriver, 1/2" open end or box end wrench.
1. Lay out and identify the parts from the Queen (#2021) or King (#2024) Base Kit. Set aside part
Trestle Rail (U) (Queen) or Trestle Rail (V) (King) for use later in the assembly process. Use the
notch and dowels on Square End Support (R) and Mitered End Support (Q) as a guide attach to
the Right Support (T) using the Hex Bolts (ZE) and Washers (ZD) from the
Headboard/Footboard Kit. See Figures 1 and 1a.
2. Attach the assembly to the Left Support (S) Using Hex Bolts (ZE) and Washers (ZD). See
Figures 2 and 2a. Identify the Headboard end of the assembly and place near the final bed
location. See drawing below.
Fig. 2
S
R
R
ZD
ZE
x 3
x 3
Q
Footboard
Headboard
Fig. 2a
ZD
ZE
Fig. 1
R
R
T
ZD
ZE
x 3
x 3
Fig. 1a
ZD
ZE
Q

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2018DUET_2022DUET — Page 8 —12/16
3. Place each pedestal (D) on top of the base kit against the side of and between the locater
blocks of the Base Kit. See Figure 3.
Fig. 3
D
Locater blocks
Locater blocks

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2018DUET_2022DUET — Page 9 —12/16
4. Open the drawers and attach the pedestal to the base using Hex Bolts (ZF) and Washers (ZD)
only finger tight. See Figures 4 and 4a.
Fig. 4
Fig. 4a
(Notched Deckboards removed for illustration purposes)
ZD
ZF
ZD
ZF
x 10
x 10

2018DUET Addison Queen Panel Storage Bed
& 2022DUET Addison King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2018DUET_2022DUET — Page 10 —12/16
5. There are two options to attach the Footboard (B) to the Pedestal Assembly. Option a) Release
the two drawers (E) at the end of the assembly as shown in Fig. 5a. Open the Drawers (E) until
the back edge of the drawer is even with the front of the Pedestal. Reach under the attached
deckboard from the backside of the pedestal and insert Bolts (ZF) and Washers (ZD) into the
Footboard (B). Push the drawers closed. Option b) remove the two end drawers (E) completely.
Insert the bolts and washers into the Footboard and reinstall the drawers. See Fig. 5b, 5c.
Fig. 5c
ZD
ZF
x 4
x 4
ZD
ZF
Fig. 5b
Option 5b shown in illustration
Fig. 5
Drawer Release Lever
Fig. 5a