Wi Digital Systems Wi AudioStream Pro Setup guide

QUICK START USER GUIDE
Wi AudioStream Pro
TM
www.widigitalsystems.com

Charging
1. Plug the AC Charger into a power socket.
2. Connect the USB Y-Split power cable to
the USB port on the AC Charger.
3. Connect one of the two mini USB connectors
into the transmitter USB port.
4. Connect the second mini USB connector into
the receiver USB port.
5. The Power/Status LED will turn to solid
Red ON.
6. When charging is complete the Red LED
will turn OFF.
7. Remove the charging cable and the AC
Charger and store in the carrying case.
The battery will last 4 to 6 hours of
continuous operation.
POWER
LINK
Mini USB
Connector
USB Port
AC Charger
USB Port
USB Connector

Pairing (Only If Needed)
1. First turn ON the transmitter (Tx) and the
receiver (Rx) units by pressing and
holding the POWER button , on each
of the units for 2 seconds.
2. Press and hold the LINK button on the
transmitter (Tx) for 3 seconds. The Power/
Status LED on the transmitter will start fast
ashing. The transmitter is now in a Pairing
mode and ready to search for the receiver.
3. Press and hold the LINK button on the
receiver (Rx) for 3 seconds. The Power/
Status LED on the receiver will start fast
ashing. The receiver is now in a Pairing
mode and ready to be found by the
transmitter.
4. Once the transmitter links with the receiver
the Power/Status LED on both devices will
turn to solid Green.
p
k
z
v
(Tx)
pk
zv
(Rx)
r

POWER
LINK/VoIP
PLEASE READ FIRST
Set Transmitter to Mono Mic-in
Mode (fast blue LED ashing)
for operation with ear worn
microphones. Refer to back
of transmitter for additional
information.
Transmitter Connection
Receiver Connection
Wireless Microphone Setup
Belt Clip
Audio Cable
r
Always route
the audio
cable beneath
Tx & Rx belt
clip to prevent
accidental
disconnection.
Sound System
Application
Recording to
your Computer
(Rx)
Mixing
Console
1/4” Stereo Y-Split to 1/8”
Stereo Cable
POWER
LINK/VoIP
Computer
Mic-In Jack
1/8” to 1/8” Cable
(Rx)
Audio Input Jack
Ear-Worn Microphone
(Tx)
(Tx)
r

In-Ear Monitoring Setup
PLEASE READ FIRST
Set Transmitter to Line-in Stereo
Mode (two blue LED ashes)
for operation with earphones.
Refer to back of Transmitter
for additional information.
Transmitter Connection
Receiver Connection
(Rx)
r
Audio Input
Jack
1/4” Stereo Y-Split to 1/8”
Stereo Cable
Belt Clip
Audio Cable Always route
the audio
cable beneath
Tx & Rx belt
clip to prevent
accidental
disconnection.
Stage Monitoring
Mixing
Console
POWER
LINK/VoIP
Computer
Headphone Jack
1/8” to 1/8” Cable
(Rx)
Music Listening from
Computer
(Tx)
(Tx)
r

www.widigitalsystems.com
QUICK START USER GUIDE
© 2013 Wi Digital Systems, Inc. All rights reserved. Stylized Wi logo is a
registered trademark of Wi Digital Systems, Inc. in the United States and may
be a registered trademark in other countries. Wi, Digital Wireless Stereo logos
and Wi AudioStream, Wi Sure-Sound, Wi Sure-Fit, Wi Sure-Ears, Wi Micro-In-Ear
are trademarks of Wi Digital Systems, Inc. All other trademarks included herein
are the property of their respective owners. US and Foreign Patents Pending.
(Design and specications subject to change without notice).
TM
The Sound of Digital Wireless Innovation

Wi Transmitter
1. Audio IN Jack
2. Power ON/OFF
3. Power/Status LED
4. Volume UP
5. Volume Down
6. Mute
7. Link/Pairing
8. Lock
9. Operation Mode
10. USB Audio
Interface &
Charging Port
11. Belt Clip
s
11
j
r
o
n
q
p
l
m
k

Transmitter Button Function
Function Button Hold LED Status
Power ON/OFF POWER 2 sec Solid Green
Pairing Mode LINK 3 sec Fast Green Flash
Volume UP Click
Volume Down
Mute ON/OFF 1.5sec Solid Green & Blue
Lock Keypad 2 sec Solid Green Only
Unlock Keypad Click Solid Green & Blue
Flashes
MIC-In Stereo MODE 2 sec Solid Green & Slow
Blue LED Flashes
MIC-In Mono MODE 2 sec Solid Green & Fast
Blue LED Flashes
Line-In Stereo MODE 2 sec Solid Green & Two
Blue LED Flashes
Transmitter LED Indicator
Function LED Status
Searching For Receiver Flashing Green
Linked to Receiver Solid Green
Lock Mode Solid Green Only
Low Battery Solid Green &
Flashing Red
Charging With Power OFF Solid Red
Charging With Power ON Solid Red & Green
Charging Complete Red OFF
l
l
l
l
l
l
l

u
|
}
y
{
z
w
x
v
11
~
Wi Receiver
1. Audio OUT Jack
2. Power ON/OFF
3. Power/Status LED
4. Volume UP
5. Volume Down
6. Link/MIC
7. Next Track
8. Previous Track
9. Mute/ Play/Pause
10.USB Charging Port
11. Belt Clip
*Functions are activated when Transmitter is connected to a USB Port

Function LED Status
Searching For Transmitter Flashing Green
Linked to Transmitter Solid Green
Lock (Activated By Tx) Solid Green Only
Low Battery Solid Green &
Flashing Red
Charging With Power OFF Solid Red
Charging With Power ON Solid Red & Green
Charging Complete Red OFF
w
w
w
w
w
w
w
Function Button Hold LED Status
Power ON/OFF POWER 2 sec Solid Green
Pairing Mode LINK 3 sec Fast Green Flash
MIC On/Off MIC Click2 Blue LED Flashes
/ Solid Green LED
Volume UP Click
Volume Down
Mute ON/OFF 1.5 sec Solid Green & Blue
Play/Pause * Click
Next Track * Click
Prev Track * Click
Receiver Button Function
Receiver LED Indicator