
8
CD PLAYER
1. Short press the Power/Mode buon on the
control panel or the Mode buon on the
remote control to select the CD funcon.
The LED screen will display ‘cd’.
2. Short press Open/Close on the control panel
or press the Open/Close buon on the
remote control to eject the CD tray. Press
the Eject buon again to close the tray once
you have placed your CD inside.
3. Press the Play/Pause buon on the remote
or control panel to begin CD playback.
4. Adjust the volume using the Volume + and
Volume- buons on the remote control.
5. Use the Skip Forward and Skip Backward
buons to skip tracks.
Repeat:
Press the repeat buon during playback to select
a repeat funcon.
Press repeat once to repeat 1 track. Press the
repeat buon twice to repeat all tracks.
Press the repeat buon three mes to turn o
repeat.
CD Programming:
Up to 20 tracks can be programmed in any order.
Before aempng to program, press the Stop
buon.
1. Make sure the CD funcon has been
selected and CD playback has been stopped
using the Stop buon.
2. Press the program buon.
3. Select the track you wish to program using
the skip buons.
4. Once the required track has been selected,
press the program buon to store the track
or song into memory.
5. Repeat steps 3 & 4 to store addional songs
or tracks into memory.
6. When all the desired songs or tracks have
been programmed, press the Play/Pause
buon to play the songs/tracks in the new
assigned order.
7. Press the Stop buon to stop programmed
playback.
8. Remove all programmed memory by
pressing the stop buon repeatedly.
Bluetooth:
1. Press the Power/Mode on the control panel
or press the mode buon on the remote
repeatedly unl the ‘bt’ shows on the LED
screen. The LED will ash unl a device has
been paired with the speaker.
2. Enable Bluetooth on your device to pair it
with your jukebox by selecng ‘I60017GW’
from the listed devices on your smart
phone/tablet. If a password is required,
press ‘0000’.
3. You can now play or skip songs using your
Bluetooth device, remote control or jukebox
control panel.
Radio:
1. Press the Power/Mode buon on the control
panel or press the mode buon on the
remote repeatedly unl you have selected
FM mode.
2. Ensure the FM antenna has been fully
extended.
3. Press the Skip Forward and Skip Backward
buons to select the desired FM radio
staon.