Wickes Madison 900 User manual

Ref. No. Item Quantity Ref. No. Item Quantity Ref. No. Item Quantity Tools Required
900 Narrow Wall Unit Assembly
Important Information
Components
1 2 Assembly Instructions 3
Caution: Some pieces of hardware could be hazardous to small children. Keep all these items out of reach and do not leave children unattended in the assembly area.
Please read these instructions carefully before proceeding. Some of the units are quite large and may have to be assembled in the room where they are to be installed.
Note: Due to variation in wall conditions no screws are supplied for fixing the units to the wall. If in doubt consult an expert. Assemble the unit on a clean solid work surface. Screws for joining cabinets together are
not supplied.
In the interest of continuing improvements we reserve the right to amend or adjust the specifications without prior notice. Errors and omissions excepted.
These units have been designed to give you years of pleasure and satisfaction. You can help to maintain the original beauty of your kitchen by following these guidelines.
Cleaning: Any spillage, even water, should be removed from the surface immediately. Remove any marks with a soft damp cloth and mild household detergent. Wipe over with a damp cloth to remove any excess
moisture and dry with a soft, clean cloth. Do not use solvents, abrasive cleaners or pigmented glass cleaners.
Helpful Information
Every effort has been made to ensure that this product leaves the factory in perfect condition. In the unlikely event that an item is damaged or incorrect, please follow these instructions:
Replacement fascias/doors: Please call 01132 013495 between 8am and 5pm, Monday to Friday. Please have your batch number and product code ready to quote from the side of the box in order to request a
replacement. On receipt of all the required information this will be despatched directly to your home within five working days.
Replacement, damaged or incorrect fittings or cabinet parts: Please contact the store where the item was purchased for replacements.
154084 8
154085 8
A
A
C
15mm
Drill
Spirit Level
G-Clamp
(pair)
Medium Crosshead
Screwdriver Hammer
Tape Measure
Bradawl
Large Flathead
Screwdriver
152112 2
152104 2
150101 4
3.5x13mm
B
B
8154004
2
151999
151101 4
(If required)
154016 Stay arm kit
containing: 2/Unit
1
(Not required)
1
1
5
1 2
1
154084 8
2
8
154004
3
2
A A
1 2 1 22 1 2 1
1 2 2 1 1 2 2 1
240mm
10mm
240mm
10mm
A A
3
3
3
10mm
240mm
6
150199
4
4.5x45mm

4 5 6 7 8
12 Installation Instructions
13 15 16 20
910 11
4
4
8
154085
4
4
4
4
B
5
6
C
8
8
12
8
Length <25mm (Not supplied)
12
15
4
150101
15
15
13
64mm
28mm
32mm
13
13
15
15
14
13
2 4
19
2
151999
19
A
17
B
17
17
C
18
19
16
16
17
B
C
A
17
17
18
18
18
18
19
5mm
Scrap wood
20
Ref. 170888 (02)
Start Locked
Do Not Over Tighten
Note: Do not over
tighten screws or use
a power screwdriver.
5
5
5
5
B
B
A
4
150199
8
4
4
4
4
B
8
8
8
9
9
9
9
A
9
Start Locked
Do Not Over Tighten
10
TOP
PANEL
ONLY
5mm
Scrap wood
Scrap
wood
11
Note: The hinge
holes are partially
drilled. Drill
through the holes
in the top panel
only. Use scrap
wood to prevent
cabinet damage.
12
12
12
12
12
12
12
12
Note: Screw through back panel
to fix unit to wall with screws
appropriate to wall type (not
supplied) at dimensions shown
above in all four corners of back
panel. For additional support,
screw through adjoining units
where present (screws not
supplied).
11
11
50mm
50mm