Wickes Vanity Unit Series User manual

Vanity Unit Installation Guide
Check all product contents and read instructions before starting installation.
Cleaning
Handle product with care.
When drilling walls check first for hidden pipes and cables.
Use safety eyewear when drilling.
Keep small parts away from children.
If product is above 20kg (see packaging), it requires 2 people to carry and install it.
Use only warm soapy water and damp cloth / sponge on a regular basis.
Do not use abrasive scouring powders. chemicals or aerosol cleaners - these may result in damage to
the surfaces.
Tools Required (Not Included)
Ф8crosshead

A x 22 D x 4B x 8 C x 3
I x 24
L x 4
J x 2
K x 4
E x 8
H x 2
F x 6 G x 2
M x 2
N x 4
1
Parts Supplied
* For Cloakroom, use * Soft close hinge * Non soft close hinge
four screws.
* For Cloakroom, use
one wall bracket.
* For Cloakroom, use
two wall plugs.

Step 1
Step 2
2
Assembly Instructions

Step 3
Step 4
3

Step 6
Step 5
4
Remove protective film
12
!

Step 7
Step 8
5
Remove protective film
Hinge Part G = Soft Close
Hinge Part H = Non Soft Close
12
!

Step 9
Step 10
ADJUSTING DOORS
1
To adjust width To adjust depth
3
To adjust height
2
6

Step 11
Step 12
7
When drilling walls, check
first for hidden pipes and
cables
We have taken great care to ensure that this product reaches you in perfect condition.
However should any parts be damaged or missing please contact your point of purchase. This does
not affect your statutory rights.
In addition, if you require replacement parts your point of purchase will be happy to assist.
* For Cloakroom, use
one wall bracket.
*For Cloakroom,
use two wall plugs and screws.