Widex TV-DEX User manual

USER INSTRUCTIONS
TV-Dex

2

Contents
PACKAGE CONTENTS ..................................4
YOUR NEW TV-DEX ....................................5
TV-CONTROLLER ......................................6
TV-BASE .............................................7
LIGHT-EMITTING DIODES ...............................8
GETTING STARTED.....................................9
CONNECTING THE UNITS: ..............................9
WHEN USING MORE THAN ONE TV-BASE ..............14
USAGE ............................................. 15
TRANSMISSION ......................................17
ADJUSTING THE VOLUME .............................19
MUTE ...............................................19
ROOM OFF ..........................................19
RECHARGING THE BATTERY ..........................20
TROUBLESHOOTING .................................. 21
CARING TIPS AND WARNINGS..........................23
SAFETY WARNING....................................25
REGULATORY INFORMATION ...........................26
3

PaCkage Contents
User manual
TV-Controller
Box 1:
Mini USB power supply
Box 2:
Lanyard
Box 3:
a. 3.5 mm jack to
3.5 mm jack cable
b. 3.5 mm jack to
phono cable
Box 4:
a. TV-Base
b. SCART adaptor
a. b.
a. b.
4

1.
2.
Your new tV-Dex
We hope you will be pleased with your DEX™ TV-
Controller and TV-Base. These user instructions ex-
plain how these units should be operated. Please
read this booklet carefully before you start using
the units.
1. TV-Controller
2. TV-Base
5

tV-Controller
The controller is provided with four keys:
1. Transmission on/off
2. Room off
3. Volume up
4. Volume down
1.
3.
4.
2.
6

1. 2. 3.
1.HEARING AID
2.HEARING AIDS
1.
tV-Base
On the back of the base you will find the following
inputs:
1. Power
2. TV
3. Audio
On the underside of the base there is a switch with
a choice of two settings:
1. Monaural/binaural switch
The setting chosen by your hearing care profes-
sional depends on whether you use a hearing aid in
only one ear (monaural) or in both ears (binaural).
7

1.
3.
4.
2.
light-emitting DioDes
There are two light-emitting diodes (LEDs) on the
controller.
1. Constant green light: Transmission
2. Changing from green to red: Transmission off
3. Constant red light: Room off active
4. Flashing red and green light: Battery charging
8

1.
2.
POWER TV AUDIO
getting starteD
You can skip steps 5+6 if you only wish to transmit
from the TV, and steps 3+4 if you only wish to trans-
mit from an audio source.
CONNECTING THE UNITS:
1. Connect the mini-USB power supply unit to
the base.
(The supply unit is available in four versions.
Your supply may therefore not look exactly as
illustrated).
2. Plug the other end into a wall socket.
9

POWER TV AUDIO
4a. 3a.
3a. Connect the jack to phono cable to the base.
4a. Plug the two phono connectors at the other
end of the cable into AUDIO OUT on the TV.
Please refer to the user guide for your TV for
further details.
10