Wido RTVRACK User manual

This wall bracket is designed for wall mounting of flat panel televisions and monitors with a screen
size between 32” to 65”. It can be installed on wood stud and solid concrete walls indoors and only
within private households. It is not designed for installation for commercial purposes.
2 Safety Notes
We recommend that this product should only be installed by suitably qualified persons or
persons competent in DIY. If you are unsure of any part of the installation, please contact a
professional installer.
Never leave children unsupervised with this product or its packaging. This article contains small
parts that could pose choking hazard. Packaging materials pose suocation hazard.
Correct and safe installation is extremely important. Falls are outside the scope of responsibility of
the manufacturer. The supplied kit is designed for installation on solid wood or concrete walls. For
any other types of surfaces, assistance from professional installer is recommended.
Do not install this article in places under which people or animals may stand.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause
product damage.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take
steps to prevent the TV from falling o.
Always read the section of instruction manual that came with your TV related to wall mounting as
some TV might require special fittings or installation requirements such as distance from wall.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical
cables or pipes in the wall before hanging bracket.
Before installing this article, ensure the wall is capable of supporting the combined weight of
television and bracket. Never exceed bracket’s maximum load of 35kg. Exceeding the weight
load may cause product failure.
Ensure that wall structure and fixings are capable of supporting the TV set. Check the
strength of the installed wall plate before attaching the TV with brackets onto it.
RTVRACK
Item Code:
Tilting TV Wall Bracket
Product:
1 Intended use
Read all instrucons carefully before assembling and using this
arcle. Retain them for future reference and if you are passing this
product to a third party, always make sure this documentaon is
included.
1

3 Identification of parts
There are many variants of TV sets on the market requiring dierent types of fitting. Bearing this in
mind, the kit supplied with this article might not support the TV you are trying to install.
If the bolts required for safe and proper installation of the bracket to your tv are not included, please
purchase required fittings from specialist shop.
If the bolts for attaching brackets to your TV are too long, included extension washers can be used
to reduce the length.

VESA Standard: 200mm x 200mm to 400mm x 400mm
Max. Load capacity: 35.5kg
Screen size supported: 32” to 55”
Distance from the wall: 6.5cm
Product net. weight: 2.2kg
Small Bolts x8
M5 x 24mm M4 X 24MM
M4 X 35MM
FWashers x8
GLong Bolts x2
H
Bracket Arms x2
I
PARTS
TOOLS REQUIRED
(Not included)
Power drill
with suitable drill bit
Pencil Cross head
Screwdriver
Hammer Stud finder
Bracket Wall Plate x1
AWall Plugs x4
C
Coach Screws x4
DPlastic Spacers x4 E
Spirit Level x1
B
2

5 Installation
Before proceeding with installation, ensure you have all parts and tools required for safe and complete
installation. Check that included bolts (F) match the TV set you are going to fix.
Should the TV set require dierent size bolts to fix bracket arms, postpone the installation until you have a
complete set. Read the instruction manual that came with your TV for advice on size of bolts required.
Select suitable wall mounting height. We
recommend positioning the TV set on the eye level
from seating position in front of the TV.
Position the bracket against the wall in chosen
location, align it using the spirit level included with
the bracket. Mark four holes with a pencil.
Avoid any live, electrical, utility pipes behind the wall.
Drill holes in the marked position approx. 6mm in
diameter and 50mm deep.
Insert the wall plugs into the holes and screw the wall
bracket to the wall.
Concrete/masonry wall installation
Secure the wall plate by inserting coach screw and a
washer through the plate into wall plugs. Tighten fully
to secure.
Solid wall
(masonry/concrete)
3
1 2
3

The fixing pack included is only suitable for solid concrete, masonry or wood stud installation. When attaching
to Dry Wall not supported with studs, you are required to purchase a suitable alernative anchors from a
reputable DIY store. You are also required to ensure suitability for the installation and that both the wall fixings
as well as wall structure are capable of supporting the TV. If in doubt, seek help from professional installer.
Wood stud installation
Dry wall installation
Identify where the studs are using a Stud Finder.
Select suitable wall mounting height. We
recommend positioning the TV set on the eye level
from seating position in front of the TV.
Position the bracket against the wall in chosen
location, align it using the spirit level included with
the bracket. Mark four holes with a pencil.
Drill holes in the marked position approx. 6mm in
diameter and 50mm deep.
Secure the wall plate by inserting coach screw and a
washer through the plate into wall stud. Tighten fully
to secure.
x
x
x
x
4
2
34
1

Locate the VESA mounting holes on the back of your TV set.
Align the brackets to the holes on back of the TV set. Secure the bracket rail using suitable size bolt,
washer. Use extension washers (E) in front of round washer if the bolts provided are too long for the
depth of the fixing holes.
Attaching the bracket arms
VESA
MOUNT
5
F
G
E
I

Complete this final step with a help of another person. Lift the TV set with brackets attached to the back of it,
hook with the bracket over the wall plate.
Tighten the bolt (H) on each of the brackets to secure it to the plate.
Attaching the bracket arms
Inspect the wall bracket regularly (at least every two months) to check that bolts and screws have not
loosened and your TV is securely fixed to the bracket and wall.
Maintenance
6

7

wido.com
TILTING TV WALL BRACKET
Batch Number:
If problems are encountered with this appliance,
please quote your order number, product code
(FTVRACK) and below batch number every me you
contact customer services.
116404