Williams-Sonoma LA COUPOLE User manual

Date: 16‐September‐15 Page 1of 4
Rev:
LA COUPOLE Small Bistro Table

Date: 16‐September‐15 Page 2of 4
Rev:
Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware list below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware, and
jeopardize integrity of item.
Parts Included:
(
A
)
Marble Top 1pc
(
B
)
Metal base 1pc
Hardware Included:
(C)
Bolt
5/16" x 1-1/4"L
4x
(D)
Spring washer
5/16"
4x
(E)
Flat washer
5/16"
4x
B
A

Date: 16‐September‐15 Page 3of 4
Rev:
Tool Required (included):
(G)
Allen wrench
Assembly Instruction Steps:
1. Carefully turn the Marble Top (A) upside down on a carpeted or scratch-free surface.
2. Attach the Metal Base(B) to the Marble Top (A) using Bolt (C), Spring washer (D) and Flat washer (E), Tighten
with Allen Wrench (G). (See Fig.1)
3. Grip the table firmly at each end and turn the assembled table to the upright position.
4. Go back and check to ensure all bolts are now properly tightened.
5. Assembly is complete.
Fig.1
Cx2pcs
Dx2pcs
Ex2pcs

Date: 16‐September‐15 Page 4of 4
Rev:
Adjusting Levelers:
Due to an uneven floor the furniture may not sit level causing it to wobble. If the piece wobbles, determine
which corner does not touch the ground correctly. With two people follow these steps:
1. Carefully lift the item slightly to provide access to the levelers attached to the bottom. (See Fig. 2).
2. Turn the levelers until adequate contact will be made with the floor. Gently set down the piece and check
stability.
3. Repeat steps until furniture sits firmly on the ground.
Care Instructions:
Dust with a clean, soft damp cloth and wipe dry immediately.
Avoid the use of chemicals and harsh cleaning agents.
TAKE NOTE: THE BOLTS MAY SLIGHTLY LOOSEN OVER TIME. IF YOUR FURNITURE FEELS "WOBBLY"
OR LOOSE, PLEASE RE-TIGHTEN BOLTS.
Thank you for your purchase.
stores | catalog | www.potterybarn.com
Adjusting Levelers
Fig.2