Williams-Sonoma Truman Round Bar Cart User manual

Truman Round Bar Cart
Assembly Instructions
1 / 2
Pre-Assembly
1. Please read all instructions carefully and completely before assembly.
2. Assembly by two people is recommended.
Parts included: (Not to scale)
Hardware/Tools included: (Not to scale)
Step 1.
Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.
Step 2.
Attach the bottom frame w/lip inside (B) to four pole legs (D), (E), align the holes and insert flat head Allen screws (G) into the
four holes, do not tighten until all four frames are fully assembled. Repeat the same procedures for the rest three frames (C), (B)
& (A). (Fig. 1)
Please note:
a. Pole legs (D) should be at the either end of top frame (A);
b. Tighten ALL of the flat head Allen screws (G) with Allen wrench (H) until TIGHT.
Part Qty. Description
A 1 pc Top frame
B 2 pcs Frame w/lip inside
C 1 pc Frame w/o lip inside
D 2 pcs Pole leg (caster w/brake)
E 2 pcs Pole leg (Caster w/o brake)
F 2 pcs Glass shelf
Part Qty. Description
G 16 pcs Flat head Allen screw
H 1 pc Allen wrench
G
. Flat head Allen screw H. Allen wrench
A
. Top frame B. Frame w/lip inside
C
. Frame w/o lip inside
D
. Pole leg (caster w/brake)
F
. Glass shelf
E
. Pole leg (caster w/o brake)

Truman Round Bar Cart
Assembly Instructions
2 / 2
Step 3.
Carefully insert glass shelves (F) into both frames (B) as shown. (Fig. 2)
Step 4.
Assembly is complete. (Fig. 3)
Care Instructions:
•Dust with a clean, soft damp cloth and wipe dry immediately.
•Avoid the use of chemicals and harsh cleaning agents.
Thank you for your purchase
Williams Sonoma Home – Customer Service 1.888.922-4105 – www.williams-sonoma.com
A
H
E
B
Fig. 1
Fig. 2
C
F
D
F
E
D
G
Fig.
3
B