Williams-Sonoma Truman User manual

Truman Bar Cart
Assembly Instructions
Pre-Assembly
1. Please read all instructions carefully and completely before assembly.
2. Assembly by two people is recommended.
Parts included: (Not to scale)
Hardware/Tools included: (Not to scale)
Step 1.
Carefully open the packaging and clear packaging material from assembly area.
Place all components on a protective surface.
Step 2.
Attach the fourth frame w/lip inside (D) to four pole legs (H), (J), align the holes and insert flat headAllen screws (K) into the
four holes, do not tighten until all four frames are fully assembled. Repeat the same procedures for the rest three frames (C), (B)
& (A). (Fig. 1)
Please note:
a. Pole legs (H) should be at the same side as the top frame with handle;
b
Cross bars on both frame (A) and (B) should be at the same side;
Part Qty. Description
A 1 pc
Top frame
B 1 pc
Second frame with cross bar
C 1 pc
Third frame w/o lip inside
D 1 pc
Fourth frame w/lip inside
E 1 pc
Small glass shelf
F 1 pc
Glass shelf
G 1 pc
Bigger glass shelf
H 2 pcs
Pole leg (caster w/brake)
J 2 pcs
Pole leg (Caster w/o brake)
Part Qty. Description
K 16 pcs Flat head Allen screw
L 1 pc
Allen wrench
K. Flat head Allen screw L. Allen wrench
A
.Topframe B.Secondframewithcrossbar
C. Third frame w/o lip inside D. Fourth frame w/lip inside
H. Pole leg
(caster w/brake)
E.Smallglassshelf F.Glassshelf G.Biggerglassshelf
J. Pole leg
(caster w/o brake)

Truman Bar Cart
Assembly Instructions
Step 3 .
Carefully insert glass shelves (E), (F) & (G) into the corresponding frames as shown. (Fig. 2)
Step 4.
Assembly is complete. (Fig. 3)
Care Instructions:
Dust with a clean, soft damp cloth and wipe dry immediately.
Avoid the use of chemicals and harsh cleaning agents.
Thank
you
for you
r
purchase
A
H
J
K
B
H
Fig. 1
Fig. 2
C
F
D
L
E
J
G
Fig. 3
B
D