Winawood Sandwick Thin Slat Love Seat User manual

Users Manual
Winawood Sandwick Thin Slat Love Seat
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE ASSEMBLY

Important Information
Please read these instructions carefully and retain for future reference
Please note children should only assist with assembly if supervised by an adult
Before use please ensure that all of the nuts and bolts are screwed tightly
Do not use any cleaning liquid containing benzene on any Winawood products
Maximum weight for each seat: 150kg
Parts List:
PART NO NAME QTY
1 Left Arm 2
2 Right Arm 2
3 Backrest 2
4 Chair Seat 2
5
M8X70mm Bolt 12
6
Allen key 1
7
Rectangular Table 2
8
M8X40mm Bolt 8
9
M4.2X35mm Bolt 8
10
1 2 3 4 5
68910
7
5
2
Front Section
Front SectionFront Section

STEP 1: Check you have the all of the parts according to the part list
STEP 2: Assemble the back rest (3) with the left arm (1) Tighten with bolts (5) as image below
shows
Assembly Instructions:
STEP 3: Assemble the chair seat (4) with the left arm (1) and tighten with bolts (5) Assemble the
chair arm’s reinforcing bar (1) with the chair arm’s edge (4) Tighten with bolts (9) as the
image below shows.
4
5
2
6
3
5
3
1
6
6
6
6
6

STEP 4: Assemble the right arm (2) to both the back rest (4) and the chair seat (3) then tighten
with bolts (5) Assemble the chair arm’s reinforcing bar (2) with the chair arm’s edge (4)
Tighten with bolts (9) as the image below shows.
STEP 5: Repeat steps 2 -4 to assemble the other chair
STEP 6: Assemble both the upper and lower rectangular tables (7) at the same time. Assemble
one side first then the other side. Tighten the bolts (8) as the image below shows.
STEP 7: Check the love seat is stable and secure after all the bolts have been tightened
9
89
4
10 10 10 10

Maintenance
Winawood products are designed and manufactured with quality materials and workmanship.
With proper use and maintenance they will provide years of use.
After assembly and when in use if you discover any of the following:
 Any bolts that become loose or bent
 Worn out washers
 Worn or bent arm, bench seat or back rest
 The item begins to shake or swing
Stop use immediately and contact your local dealer
Winawood products are easy to maintain and can be cleaned with water.
Do not use any cleaning liquid that contains benzene