WINDAMP AF02 User manual

AF02
www.windamp.com
USER’S MANUAL
SAFETY INSTRUCTIONS
PRODUCT SPECIFICATION & CONTAINS
INSTALLATION
CONTROLS
WARRANTY
COMPANY INFO.

SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS FAN.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
1) ambient operating temperature: 40 °C
2) This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
3) the appliance is only to be used with the power supply unit provided with the appliance.
4) it must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
- To use the fan, follow the descriptions in this manual. Never carry out any maintenance
other than described in this manual.
- This fan is not intended for use by young children or lack of experience and knowledge,
unless they have been given supervision or instruction by a responsible person
concerning use of the appliance to ensure that they can use the appliance safely.
- The fan is suitable for dry location only. Do not use it in outdoor or in wet area.
- The fan must be assembled securely before operating.
- Turn off all controls before unplugging.
- Unplug from outlet when not in use for extended period.
- Clean the outer part of the fan regularly with dry cloth.
- Do not use any cleaning agents, lubricants or any other chemicals for cleaning.
- Do not carry the base part of the fan. Always carry the square head part with both hands.
- Do not place or use the fan near the furnaces, fireplace or other sources of heat.
- Do not route cord under furniture or appliances. Arrange cord away from traffic area and
where it will not be tripped over.
- Do use common sense when using this fan and/or any electrical appliances.
- Do not cover the cord with throw rugs or similar coverings.
- Do not put anything into air inlet.
- Do not use the fan or handle the plug with wet hands.
- Do not unplug by pulling on cord.
- Do not use other adaptors without authorization.
- Do not hang or mount fan on a wall or ceiling.
- Do not dismantle or modify the fan.
- Do not sit on the fan or put heavy items on the fan.
* Do not Turn the Head on your own.
WARNING
02

PACKAGE CONTAINS
PRODUCT SPECIFICATION
03
Battery
(CR2025)
Fan (Head)
Fan (Base) Remote control
User’s Manual
Adaptor
Fan Remote Control
Size (WxDxH) 367x308.5x419(mm)
1hr ‒ 8hrs
Timer
Lv.1 ‒ Lv.8
Wind Volume
22W
Input Power
4.0kg
Weight
5.8m/sec
High Speed
100-240V, 50/60Hz
Rated Voltage
30°
Tilt(Manual)
70°
Oscillation
High glossy ABSMaterial
AC 100~240V(Free Volt), 50/60Hz
->DC 12V 2.0A 24W, SMPS
Adaptor
Size (WxDxH) 41.4x82.5x8.5(mm)
Power ON/OFF
Oscillation ON/OFF
Timer UP/DOWN
Wind Volume UP/DOWN
Material High glossy ABS
Battery CR2025

INSTALLATION
04
Assemble the head and the
base, aligning the arrows.
Once aligned, push
downward and rotate the
base counterclockwise
until you hear a click
sound.
Plug the power cord into
the standard outlet located
on the bottom of the base.
Assembly & Adaptor Connection
Disassembly
Unplug the power cord
from the standard outlet
on the bottom of the base.
Press the button and rotate
the base clockwise.
Separate the head and the
base.
Button
Push RotateRotate

05
LED Indicator
Sound FaMi Sol La TiReDo Do
Wind Lv. 4Lv. 3 Lv. 5 Lv. 6 Lv. 7Lv. 2Lv. 1 Lv. 8
Timer 4hrs3hrs 5hrs 6hrs 7hrs2hrs1hr 8hrs
NOTE:
Touch + button to set timer for 1 hr, then the 1st
LED will blink. To cancel the setting, touch +
once from 8 hrs setting, or - once from 1 hr
setting. Then it makes ‘beep’ sound.
NOTE:
When setting 1st level, the fan makes “Do”
sound, but there is no change on LED indicator.
Also it memorizes past wind volume setting
when turning on again.
Power Button
Touch the button to turn on/off the fan,
When operating, 1st LED is always on.
(It also indicates 1st Level of Wind
Volume and Timer at the same time)
Touch the button to turn on/off the
oscillating function.
Oscillation Button
Timer Button
Touch the button to adjust the time
from 1 hr to 8 hrs.
Wind Volume Button
Touch the button to control the wind
volume upto Lv. 8.
Note: When touching buttons except Power button, LED indicates current setting for 3 seconds.
CONTROLS

06
Button
+
-
Button
TILT
The head of the fan can be manually adjusted from 0° to 30°.
0° 15° 30°
How to use
Touch the “+” button (top of the
clock button) to extend 1 hour.
Touch the “-“ button (bottom of the
clock button) to reduce 1 hour.
Touch the “+” button (top of fan
button) to increase the wind
volume.
Touch the “-” button (bottom of the
fan button) to decrease the wind
volume.
Mute
Touch these two "+" buttons (on the top of the clock and fan buttons)
and hold for at least 3 seconds.
Lock
Touch these two "-" buttons (underneath of the clock and fan
buttons) and hold for at least 3 seconds.
CONTROLS

07
CONTROLS
Remove the battery cover by sliding downward, and insert the battery (CR2025) into
the remote control in direction of arrow.
Remote Control Battery
Remote Control Instructions
Power
Turns on/off the fan
Oscillation
Turns on/off the oscillation
Wind Volume
Controls the wind volume
Timer
Adjusts the time
Tilt
Tilt
Attach remote control to marked top of
base part with the top facing up.
Use the remote control facing to IR receiver
of head part.
Place Magnetic Remote ControlRemote Control Operation

This warranty is valid only with original purchase receipt.
The warranty starts to be effective for a period of ‘2 years’ from the original
purchase date. Please keep your proof of purchase (receipt).
This warranty provides, at no extra cost to you, all labors and parts necessary
to ensure your product is in proper operating condition during the warranty
period. All replaced products will become the property of Windamp co., Ltd.
The replacement will not extend the warranty period.
WARRANTY DOES NOT COVER
The warranty does not cover careless operation or handling of the fan
without following the instruction of this manual. The warranty does not
cover the damage of dismantle or modify the fan without authorization. The
warranty does not cover the fan purchased outside of the country. Failure
caused by force majeure or any circumstances out of Windamp’s control,
weather, electrical outages or power surges.
WARRANTY DOES COVER
For 2 years of purchase, this warranty covers the defect from material,
workmanship or function. If any defect, mentioned above, is discovered
within the warranty period, Windamp will replace the product with no cost,
but shipping cost will be charged to customers.
Repair not covered by the warranty or after the warranty period will require
a fee to cover the cost of material, labors, handling and shipping.
The parts or the products which are replaced will become the property of
Windamp.
WARRANTY
2 Years Limited Warranty
08

US CN
JP KR
Windamp Co., Ltd.
#403, Seongsu IT Center,37,Seongsui-ro 22-gil
Seongdong-gu, Seoul, Korea
Zip code 133-832
COMPANY INFO.
09
（株）WINDAMP
首尔市城东区（圣水二街？）
Seongsui-ro 22路37
圣水IT中心403号
㈜ 윈드앰프
서울시�성동구�성수이로 22길 37
성수IT 센터 403호
T [phone]
F [phone]
E [e-mail]
www.windamp.com
SMART BS株式会社(販賣)
〒146-0082 東京都大田区池上１-６-９
T 03 6677 0530
www.smartbs.co.jp
WINDAMP ㈱ウィンドエンプ(製造)
Seongsu IT center 403, 37,
Seongsui-ro 22-gil Seongdong-gu
Seoul, Republic of Korea