Windbit ESW1L3 Series Installation and operating manual

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 1
ESW1L3 & ESW2L3 Series Switches
Hardware installation and reference guide
Copyright © Windbit Dm3022-I Version 1.0 2023

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 2
Legal Notice
Warranty
This publication is subject to change.
Teldat S.A. offers no warranty whatsoever for information contained in this manual.
Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the delivery,
supply or use of this manual.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 3
1 Product Overview
The ESW1L3 and ESW2L3 series switches are new generation layer 3 switches, providing high performance, consolidated
security and multiple services. The switches are mainly applied to the access layer to provide line-rate switching and
complete QoS policies, prioritizing some traffic over others to ensure important data transmission without lantency. The
switches also support a wide variety of Ethernet interfaces with flexible media options for network construction.
There are 7 models available now.
Model
10/100/1000Base-T
Adaptive Ethernet
Port
GE
SFP
Port
10GE
SFP+
Port
Management
Port
USB
Port
Console
Port
RPS
ESW1L3-24GE4XS-E
24
N/A
4
1
1
1
Fixed
Power
Supply
ESW1L3-48GE4XS-E
48
N/A
4
1
1
1
Fixed
Power
Supply
ESW1L3-24GE4XS-P
24 (PoE+ Capable)
N/A
4
1
1
1
Fixed
Power
Supply
ESW2L3-24GE4XS-E
24
N/A
4
1
1
1
Dual
Power
Supplies
ESW2L3-48GE4XS-E
48
N/A
4
1
1
1
Dual
Power
Supplies
ESW2L3-24GE4XS-P
24 (PoE+ Capable)
N/A
4
1
1
1
Dual
Power
Supplies
ESW2L3-48GE4XS-P
48 (PoE+ Capable)
N/A
4
1
1
1
Dual
Power
Supplies
This is a Class A product. In a domestic environment this product may cause radio interference. In this case, users are
advised to take proper measures against the interference.
An SFP+ port supports both 10GBase-R and 1000Base-X.
The PoE+ port is backward compatible with the PoE standard.
⚫Management port: The management port is a 10/100/1000Base-T Ethernet port that uses an RJ-45 connector. This
port is connected to an Ethernet port of a PC with an Ethernet cable for program downloading. You can manage and
maintain the switch remotely by connecting the management port to the Ethernet port of a PC with an Ethernet cable.
⚫USB port: The USB port is the interface into which you plug your USB storage device for online upgrade or log storage.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 4
⚫Console port: The console port is an RS-232 port that uses an RJ45 connector. The console port is used to connect a
PC directly to the management system for debugging, configuration, maintenance, management and program loading.
1.1 ESW1L3-24GE4XS-E
Specifications
Model
ESW1L3-24GE4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
•SFP+ Port:
•SFP Modules and SFP BIDI Modules
•SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Built-in Power Supply
•AC Input
•Rated Voltage Range: 100 V AC to 240 V AC
•Maximum Voltage Range: 90 V AC to 264 V AC
•Frequency: 50 Hz/60 Hz
•Rated Current Per Circuit: 1.5 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not supported
Power Consumption
< 40 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 5
Dimensions
(W x D x H)
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Weight
2.7 kg (5.95 lbs.)
Appearance
The front panel of the ESW1L3-24GE4XS-E switch provides 24 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one management port, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-1 ESW1L3-24GE4XS-E Switch Appearance
Front Panel
Figure 1-2 Front Panel of ESW1L3-24GE4XS-E
1. System Status LED
2. Management Port LED
3. USB Port
4. Console Port
5. Management Port
6. 10/100/1000Base-T Ethernet Port
7. 10GE SFP+ Port
8. Port LED
Back Panel
Figure1-3 Back Panel of ESW1L3-24GE4XS-E

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 6
1. Grounding Stud
2. AC Power Plug
Power Supply
The ESW1L3-24GE4XS-E switch has a built-in power supply module. The back panel has an an AC power plug.
Cooling
The ESW1L3-24GE4XS-E switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-4 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking Green
(3 Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking Green
(10 Hz)
System is being located.
Solid Green
System is operating normally.
Solid Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
Management Port LED
MGMT
Off
No link is detected for this port.
Solid Green
The port has made a successful 1000 Mbps link.
Blinking Green
The port is sending and receiving traffic at 1000
Mbps.
Solid Yellow
The port has made a successful 10/100 Mbps link.
Blinking Yellow
The port is sending and receiving traffic at 10/100
Mbps.
10GE SFP+ Port LED
25F to 28F
Off
No link is detected for this port.
Solid Green
The port has made a successful 1/10 Gbps link.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 7
Blinking Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T
Ethernet Port LED
1F to 24F
Off
No link is detected for this port.
Solid Green
The port has made a successful 10/100/1000
Mbps link.
Blinking Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
1.2 ESW1L3-48GE4XS-E
Specifications
Model
ESW1L3-48GE4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
⚫SFP+ Port:
⚫SFP Modules and SFP BIDI Modules
⚫SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Built-in Power Supply
⚫AC Input
⚫Rated Voltage Range: 100 V AC to 240 V AC
⚫Maximum Voltage Range: 90 V AC to 264 V AC
⚫Frequency: 50 Hz/60 Hz
⚫Rated Current Per Circuit: 2 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not Supported
Power Consumption
< 55 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 8
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU
Dimensions
(W x D x H)
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Weight
3 kg (6.61 lbs.)
Appearance
The front panel of the ESW1L3-48GE4XS-E switch provides 48 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one management port, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-5 ESW1L3-48GE4XS-E Switch Appearance
Front Panel
Figure 1-6 Front Panel of ESW1L3-48GE4XS-E
1. System Status LED
2. Management Port LED
3. USB Port
4. Console Port
5. Management Port
6. 10/100/1000Base-T Ethernet Port
7. 10GE SFP+ Port
8. Port LED
Back Panel
Figure 1-7 Back Panel of ESW1L3-48GE4XS-E

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 9
1. Grounding Stud
2. AC Power Plug
Power Supply
The ESW1L3-48GE4XS-E switch has a built-in power supply module. The back panel has an AC power plug.
Cooling
The ESW1L3-48GE4XS-E switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-8 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking Green
(3 Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking Green
(10 Hz)
System is being located.
Solid Green
System is operating normally.
Solid Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
Management Port LED
MGMT
Off
No link is detected for this port.
Solid Green
The port has made a successful 1000 Mbps link.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 10
Blinking Green
The port is sending and receiving traffic at 1000
Mbps.
Solid Yellow
The port has made a successful 10/100 Mbps link.
Blinking Yellow
The port is sending and receiving traffic at 10/100
Mbps.
10GE SFP+ Port LED
49F to 52F
Off
No link is detected for this port.
Solid Green
The port has made a successful 1/10 Gbps link.
Blinking Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T
Ethernet Port LED
1F to 48F
Off
No link is detected for this port.
Solid Green
The port has made a successful 10/100/1000
Mbps link.
Blinking Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
1.3 ESW1L3-24GE4XS-P
Specifications
Model
ESW1L3-24GE4XS-P
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
⚫SFP+ Port:
⚫SFP Modules and SFP BIDI Modules
⚫SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Built-in Power Supply
•AC Input
•Rated Voltage Range: 100 V AC to 240 V AC
•Maximum Voltage Range: 90 V AC to 264 V AC
•Frequency: 50 Hz/60 Hz
•Rated Current Per Circuit: 6 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
All RJ45 ports are PoE+ capable and each port provides up to 30 W of power.
Maximum PoE Output: 370 W
The PoE+ port is compliant with both the PoE (IEEE802.3af) and PoE+ (IEEE802.3at)
standards.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 11
The maximum number of PoE devices supported by the switch is determined by the
available PoE consumption of the switch and the actual PoE consumption of each
device.
The PoE port is compliant with Alternative A.
Power Consumption
Without PoE Load: < 65 W
With PoE Full Load: < 410 W
Operating Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU
Dimensions
(W x D x H)
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Weight
3 kg (6.61 lbs.)
1.4 ESW2L3-24GE4XS-E
Specifications
Model
ESW2L3-24GE4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
•SFP+ Port:
•SFP Modules and SFP BIDI Modules
•SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Power Supply Module
Slots
2
Power Supply Module
ESWPSUA/0IB-F

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 12
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 2 A
Model: ESWPSUA150IB-F
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 3 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not Supported
Power Consumption
< 40 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU
Dimensions
(W x D x H)
442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Weight
4 kg (8.82 lbs.)
Appearance
The front panel of the ESW2L3-24GE4XS-E switch provides 24 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one management port, one Console port and one USB port. The back panel has two power supply module slots.
Figure 1-9 ESW2L3-24GE4XS-E Switch Appearance

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 13
Front Panel
Figure 1-10 Front Panel of ESW2L3-24GE4XS-E
1. System Status LED
2. MGMT Port LED
3. PWR1 Status LED
4. PWR2 Status LED
5. USB Port
6. Console Port
7. Management Port
8. 10/100/1000Base-T Ethernet Port
9. 10GE SFP+ Port
10. Port Status LED
Back Panel
Figure1-11 Back Panel of ESW2L3-24GE4XS-E
1. Grounding Stud
2. Power Supply Module Slot 1 (A filler panel is required if
the slot is vacant.)
3. Power Supply Module Slot 2 (A filler panel is required if
the slot is vacant.)
Power Supply Module
The ESW2L3-24GE4XS-E switch supports dual power supply modules. See Chapter 1.8 for details about the power supply
modules.
The switch can be powered on by either one power supply module or dual power supply modules. If both power supply
modules are used, the switch works in the power redundancy mode.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 14
Cooling
The ESW2L3-24GE4XS-E switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-12 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking
Green (3 Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking
Green (10 Hz)
System is being located.
Solid Green
System is operating normally.
Solid Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
Power Supply Status LED
PWR1/PWR2
Off
The power supply module is not seated.
Solid Green
The power supply module is seated and providing
power to the switch.
Solid Yellow
The model of the power supply module is not
supported or cannot be read.
Solid Red
The redundant power supply module is not
functioning properly or not connected with the AC
power cord.
Management Port LED
MGMT
Off
No link is detected for this port.
Solid Green
The port has made a successful 1000 Mbps link.
Blinking
Green
The port is sending and receiving traffic at 1000
Mbps.
Solid Yellow
The port has made a successful 10/100 Mbps link.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 15
Blinking
Yellow
The port is sending and receiving traffic at 10/100
Mbps.
10GE SFP+ Port LED
25F to 28F
Off
No link is detected for this port.
Solid Green
The port has made a successful 1/10 Gbps link.
Blinking
Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T Ethernet
Port LED
1F to 24F
Off
No link is detected for this port.
Solid Green
The port has made a successful 10/100/1000
Mbps link.
Blinking
Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
1.5 ESW2L3-48GE4XS-E
Specifications
Model
ESW2L3-48GE4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
⚫SFP+ Port:
⚫SFP Modules and SFP BIDI Modules
⚫SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Power Supply Module
Slots
2
Power Supply Module
ESWPSUA/0IB-F
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 2 A
ESWPSUA150IB-F
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 3 A
SFP+ Port
10GBase-R Capable

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 16
1000Base-X Capable
RTC
Supported
PoE
Not supported
Power Consumption
< 55 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU
Dimensions
(W x D x H)
442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Weight
4.3 kg (9.48 lbs.)
Appearance
The front panel of the ESW2L3-48GE4XS-E Ethernet switch provides 48 10/100/1000Base-T Ethernet ports, four 10GE
SFP+ ports, one management port, one Console port and one USB port. The back panel has two power supply module
slots.
Figure 1-13 ESW2L3-48GE4XS-E Switch Appearance
Front Panel
Figure 1-14 Front Panel of ESW2L3-48GE4XS-E

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 17
1. System Status LED
2. Management Port LED
3. PWR1 Status LED
4. PWR2 Status LED
5. USB Port
6. Console Port
7. Management Port
8. 10/100/1000Base-T Ethernet Port
9. 10GE SFP+ Port
10. Port LED
Back Panel
Figure 1-15 Back Panel of ESW2L3-48GE4XS-E
1. Grounding Stud
2. Power Supply Module Slot 1 (A filler panel is required if
the slot is vacant.)
3. Power Supply Module Slot 2 (A filler panel is required if
the slot is vacant.)
Power Supply
The ESW2L3-48GE4XS-E switch supports dual power supply modules. See Chapter 1.8 for details about the power supply
modules.
The switch can be powered on by either one power supply module or dual power supply modules. If both power supply
modules are used, the switch works in the power redundancy mode.
Cooling
The ESW2L3-48GE4XS-E switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-16 Airflow Direction

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 18
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking Green
(3 Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking Green
(10 Hz)
System is being located.
Solid Green
System is operating normally.
Solid Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
Power Supply Status LED
PWR1/PWR2
Off
The power supply module is not seated.
Solid Green
The power supply module is seated and providing
power to the switch.
Solid Yellow
The model of the power supply module is not
supported or cannot be identified.
Solid Red
The redundant power supply module is not
functioning properly or not connected with the AC
power cord.
Management Port LED
MGMT
Off
No link is detected for this port.
Solid Green
The port has made a successful 1000 Mbps link.
Blinking Green
The port is sending and receiving traffic at 1000
Mbps.
Solid Yellow
The port has made a successful 10/100 Mbps link.
Blinking Yellow
The port is sending and receiving traffic at 10/100
Mbps.
10GE SFP+ Port LED
49F to 52F
Off
No link is detected for this port.
Solid Green
The port has made a successful 1/10 Gbps link.
Blinking Green
The port is sending and receiving traffic at 1/10
Gbps.
1F to 48F
Off
No link is detected for this port.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 19
10/100/1000Base-T
Ethernet Port LED
Solid Green
The port has made a successful 10/100/1000
Mbps link.
Blinking Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
1.6 ESW2L3-24GE4XS-P
Specifications
Model
ESW2L3-24GE4XS-P
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
⚫SFP+ Port:
⚫SFP Modules and SFP BIDI Modules
⚫SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
The module types may update without prior notification. Please contact Windbit for
details.
Power Supply Module
Slots
2
Power Supply Module
ESWPSUA600I-P-F
AC Input
Rated Voltage Range: 200 V AC to 240 V AC
Maximum Voltage Range: 176 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 8 A
ESWPSUA1000I-P-F
AC Input
Rated Voltage Range: 200 V AC to 240 V AC
Maximum Voltage Range: 176 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 8 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
All RJ45 ports are PoE+ capable and each port provides up to 30 W of power. The maximum
power depends on the configured power supply.

Windbit Hardware Installation and Reference Guide
ESW1L3 & ESW2L3 Series Switches 20
The PoE+ port is compliant with both the PoE (IEEE802.3af) and PoE+ (IEEE802.3at)
standards.
The maximum number of PoE devices supported by the switch is determined by the
available PoE consumption of the switch and the actual PoE consumption of each
device.
The PoE port is compliant with Alternative A.
Power Consumption
Without PoE Load: < 65 W
With PoE Full Load: < 810 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Operating Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
EMC DIRECTIVE 2014/30/EU (CLASS A)
Safety Regulation
Compliance
LVD DIRECTIVE 2014/35/EU
Dimensions
(W x D x H)
442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Weight
4.3 kg (9.48 lbs.)
Appearance
The front panel of the ESW2L3-24GE4XS-P switch provides 24 10/100/1000Base-T Ethernet ports (PoE+ capable), four
10GE SFP+ ports, one management port, one Console port and one USB port. The back panel has two power supply
module slots.
Figure 1-17 ESW2L3-24GE4XS-P Switch Appearance
Other manuals for ESW1L3 Series
1
This manual suits for next models
8
Table of contents
Other Windbit Switch manuals