Wine Rack Shop Wine Buffet Table User manual

Wine Buffet Table Assembly Instructions:
Step 1. Align all rack uprights with ends marked “B” at the same end. This end of rack uprights is the bottom of
the rack and will sit on the Baseboard Assembly.
Step 2. Attach (2) Bin Frame Attachment Pieces to Bin Frame Sections at top using Nuts and 45mm Bolts(shorter
bolts). Repeat this step to attach (2) Bin Frame Attachment Pieces at bottom. Tighten bolts with Allen wrench.
Repeat this step for other Bin Rack.

Step 3. Rack uprights marked with “B” on ends will be at bottom of rack and will sit on the Baseboard Assembly.
Attach rack uprights to Bin Frame Sections with nuts and bolts. Use highlighted holes in rack uprights and
highlighted holes in Bin Frame Sections. Tighten bolts with Allen Wrench provided.
Step 4. Insert 65mm bolts(longer bolts) through inside of shelf though rack upright and through Bin Frame Section and
thread nut onto bolt. Skip 3 holes between each bolt and attach next shelf.

Step 5. Using a screwdriver attach both rack top pieces together using rack top attachment pieces with wood screws. Repeat
this same step for baseboard.
Step 6. Sit assembled racks onto Baseboard Assembly.

Step 7. Slide raised panel sides along Bin Racks and into Baseboard Assembly.
Step 8. Slide top onto racks.

Step 9. Add wine to your wine buffet table.