Wintal WSB11 User manual

User's Manual
WSB11 Professional Sound Bar

Voltage:
Voltages are 100-240V AC,50/60Hz.
CAUTION: To reduce the risk of electric shock, do
not remove cover (or back). No user-serviceable
parts inside. Onlyrefer servicing toqualified service
personnel.
CAUTION
RISK OF SHOCK
NOTICE! !NOTICE! !
Thank you for purchasing our product.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Explanation of Graphical Symbols
The lightning flash & arrowhead symbol,
within an equilateral triangle, is intended
to alert you to the presence of danger.
The exclamation point within an equilate-
ral triangle is intended to alert you to the
presence of importantoperating and ser-
vicing instructions.
IMPORTANT SAFETY INSTRUCTIONS
.
5
6.
7.
7.
8.
9.
10.
11.Protect the power cord from being walked on or pinched.
12.
3. Heed Warnings - All warnings on the sound bar and in
the operating instructions should be adhered to.
4 Follow Instructions -All operating and use instructions
should be followed.
.To reduce the risk of electric shock or component damage,
switch off the power beforeconnecting other components to
your Sound Bar.
Unplug the power cord before cleaning your sound bar. A
damp cloth is sufficient for cleaning.Do not use a liquid or a
spray cleaner on your sound bar.Do not use abrasive cleaner.
Always use the accessories recommended by the manu-
facturer to insurecompatibility.
8.When moving your sound bar from an area of low tempe-
rature to an area of high temperature, condensation may
form in the housing.Wait before turning on your sound bar
to avoid causing fire,electric shock, or component damage.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
your sound barand to protectit from overheating, be sure
these openings arenot blocked orcovered. Do notplace
your sound bar in a bookcase or cabinet unless proper ve-
ntilation is provided.
A distance of at least 3 feet should be maintained betwe-
en your sound bar and any heat source,such as a radiator,
heater,oven, amplifier etc.Do not install your sound bar
close to smoke.Operating your soundbar close to smoke
or moisture maycause fire orelectric shock.
Your sound bar AC/DC Adapters are equipped with a thr-
eepronged grounded plug(aplug with athird grounding pin).
This plug will fit only into a grounded power outlet. This is a
safety feature.If your outlet doesnot accommodate the thr-
eepronged, have an electrician install the correct outlet,or
use an adapter to ground your sound bar safely.
Do not defeat the safety purpose of the grounded plug.
Never push any object into the slots and openings on
WARNING
To reduce the risk of fire or electric shock, do not
expose this unit to rain or moisture.
1. Read Instructions- All the safety and operating instru-
ctions should be read before the soundbar is operated.
2. Retain Instructions- The safety and operating instru-
ctions should be retained for future reference.
Your sound bar is designed and manufactured to operate within defined design limits, and misuse may
result in electric shock or fire. To prevent your Sound Bar from being damaged,the following rules should
be observed for its installation,use,and maintenance.Please read the following safety instructions before
operating your Sound Bar. Keep these instructions in a safe place for future reference.

IMPORTANT SAFETY INSTRUCTIONS
Your sound bar enclosure. Do not place any objects on the
top of yoursound bar.Doing so couldshort circuit parts
causing a fire or electric shock. Never spill liquids on your
sound bar.
Your sound bar should be operated only from the type
of power source indicated on the label on the AC/DC Ada-
pters. If youare not sureof the typeof power suppliedto
your home, consult your dealer or local power company.
Only power of the marked voltage can be used for your
sound bar. Any other voltage than the specified voltage
may cause fireor electric shock
15.The power cord must be replaced when using different
voltage than thevoltage specified. Formore information,
contact your dealer.
15.When connected toa power outlet,power is always
flowing into your sound bar. To totally disconnect power,
unplug the power cord.
15.Do not overloadpower strips andextension cords.
Overloading can resultin fire orelectric shock.
18.The wall socket should be located near your sound bar
and be easily accessible.
19.Do not touch the power cord during lightning. To avoid
electric shock, avoidhandling the powercord during elect-
rical storms.
Unplug your sound bar during a lightning storm or when
it will notbe used forlong periods oftime.This will protect
your sound barfrom damage dueto power surges.
Serv-
icing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug damage, liquid
has been spilledor objects havefallen into theapparatus,
the apparatus has been exposed to rain or moisture, or the
apparatus does not operate normally or has been dropped.
Do not attemptto repair orservice sound baryourself.
Opening or removingthe front covermay expose youto
high voltages, electric shock, and other hazards. If repair
is required, contactyour dealer andrefer all servicingto
13.
14.
20. Use only with the cart, stand, tripod,
bracket, or table specified by the man-
ufacturer, or sold with the sound bar.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
21.
22.Refer all servicing to qualified service personnel.
22.
qualified service personnel.
Keep your sound bar away from moisture.Do not expo-
se your sound bar to rain or moisture. If water penetrates
into your soundbar, unplugthe power cordand contact
your dealer.Continuous use inthis case mayresult in fire
or electric shock.
Do not useyour sound barif any abnormalityoccurs. If
any smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to re-
pair your soundbar yourself.
Avoid using dropped or damaged appliances. If your
sound bar is dropped and the housing is damaged, the in-
ternal components may function abnormally. Unplug the
power cord immediately and contact your dealer for repair.
Continued use of your sound bar may cause fire or electric
shock.
Do not installyour sound barin an areawith heavy dust
or high humidity.Operating your soundbar in environments
with heavy dust or high humidity may cause fire or electric
shock.
Ensure that the power cord and any other cables are u-
nplugged before moving your sound bar.
When unplugging your sound bar, hold the power plug,
not the cord. Pulling on the power cord may damage the
wires inside the cord and cause fire or electric shock.When
your sound bar will not be used for an extended period of
time, unplug the power cord.
To reduce risk of electric shock, do not touch the conn-
ector with wethands.
30 Insert the remotecontrol battery in accordance with in-
structions. Incorrect polaritymay cause the battery to leak
which can damage the remote control or injure the operator.
31 If any of the following occurs, contact the dealer:
The power cord fails orfrays.
Liquid sprays or any object drops into your sound bar.
Sound bar is exposed to rain or other moisture.
Sound bar is dropped or damaged in any way.
The performance of your sound bar changes substantially.
23.
24.
25.
26.
27.
28.
29.
.
.
.

Table of Contents
4
Operating Your Sound Bar
Front Panel introduction
Overview of the Remote Control
Remote Control Function
Rear Panel Introduction
Subwoofer Panel Introduction
Subwoofer Rear Panel Introduction
Connecting the wireless subwoofer
Functions Operating
Turning the power on/off
Adjusting SW volume
Adjusting the volume
Turning the SRS mode on/off
Muting the sound
Selecting the input mode
9
10
11
12
13
13
14
15
9
15
15
15
15
16
16
17
18
18
Troubleshooting 17
General
Subwoofer
Remote Control
19
Specifications
Table of Contents 4
Features
Installing batteries in the remote control
Notes About the Remote Control
Remote control operation range
Connecting to Audio-Visual Components
Opening the Package
5
6
7
7
7
8
Getting Started 5
TImportant Safety Instructions 2

Getting Started
100w Power Amplifier
Total 100 watts power(20Wx2+60W) for powerful sound.
20WX2 for sound bar, 60W for subwoofer.
Active Speaker System
This unit features an Active Speaker System that provides
high sound quality in a single slim unit.This unit does not
require any satelliteloudspeakers or speakercabling, which
are normally associated with conventional surround sound
systems.
Dolby Digital
This is the standard audio signal format used on DVDs and
other purely digitalmedia.This surround technologydelivers
high-quality digital audioof up to5.1 discrete channelsto
produce a directionaland more realisticeffect.
HDMI,and HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI licensing LLC.
Manufactured under license from Dolby Laboratories.
"Dolby", and the double-D symbol are trademarks of Dolby
Laboratories.
R
HDMI
Enjoy high definition performance from HDMI (High Def-
i nition Multimedia Interface) devices such as Blu-ray D-
isc players, digital receivers, game consolesetc.
Wireless Subwoofer
Wintal's wireless module does away with cables running
between the main unit and the subwoofer.Instead, the
subwoofer connects to a compact wireless module that
communicates with themain unit.
Touch Button
Touchsensitive capacitive frontpanel buttons.
Ergonomic optical switchesrequire no physical pressure
to operate, eliminatingthe hand stressthat can lead to
repetitive-motion injuries.
5
Features

6
Getting Started
Your Sound Bar,Subwoofer and their accompanyingaccessories are carefully packed in two carton that has been designed to
protect it fromtransportation damage. Once you have opened the carton, check that your Sound Bar is in good condition and
that all of the contents are included.
IMPORTANT: Save the carton and packing material for future shipping.
Opening the Package
One User's Manual
Power cord (in the subwoofer box)
Sound bar main unit
One Remote Control
AA,LR6,UM-3 batteries
Adapter(with power cord)
AA,LR6,UM-3 battery
User's Manual
AA,LR6,UM-3 battery
Wireless Subwoofer(in the subwoofer box)
Warranty Card

Notes About the Remote Control
If you find that the remote control must be used closer to the
main unit, the batteries are weak. Replace both batteries with
new ones.
The area between the remote control and the main unit mustbe
clear of largeobstacles.
Do not exposethe remote control sensor to stronglighting,in
particular an invertertype fluorescent lamp.Otherwise,the
remote control maynot work properly. If necessary, position the
main unit awayfrom direct lighting.
7
Getting Started
Battery Replacement
Notes Notes
Since the remote control will be used for many of this unit's
control operations, you should begin by installing the supplied
batteries.
1.Turn the remote control over and open the battery compart-
ment py pressing the release tab in the direction of the arrow
and lifting the cover open.
2. Insert the batteries(AA,LR6,UM-3 TYPE) according to the
polarity markings on the inside of the battery compartment.
3.Close the battery compartment cover.
Use AA,LR6,UM-3batteries.
Be sure thepolarities are correct.(See the illustration inside the
battery compartment.)
Remove the batteriesif the remote control is not used for an
extended period oftime.
If batteries leak,dispose of them immediately. Avoid touching
the leaked materialand contact with clothing, etc. Clean the
battery compartment thoroughlybefore installing new batteries.
30
30
Within approximately
6m(19.7feet)
Installing batteries in the remote controller Remote Control Operation Range
This remote control must use non chargable or
chargable alkaline type batteries only.

8
Getting Started
Connecting to Audio-Visual Components
TV
ToAUDIO OUT (TV)
To HDMIIN (TV)
To HDMIOUT (TV)
CD Player
If your CD player is equipped with digital optical jacks, the use of optical cable is preferred.
What you need is just one more optical digital connecting cord(not supplied). Plug it in the
digital input jack of the sound bar and select OPTICAL.You can enjoy better sound quality
brought to you by the optical cable.
Note: This sound bar has one digital optical jack only. Be sure that this connection does
not prevent optical cable connection of other components.
OPTICAL OUT(CD PLAYER)
DVD Player or
blue ray DVDplayer
HDMI OUT (DVD PLAYER or BLUE RAY DVD PLAYER)
COAXIAL OUT(CDPLAYER)
AUDIO OUT(DVD PLAYER or BLUE RAY DVD PLAYER)
To VIDEO OUT(TV)
COAXIAL OUT (DVDPLAYER or BLUERAY DVDPLAYER)
If you have a Blue ray DVD player,DVD player or CD player with a digital output, you can make use of an
optical digital connecting cord(not supplied) or coaxial digital connecting cord (not supplied) to carry the
audio portion of the signal and enjoy Dolby Digital sound quality. One optical or coaxial cable is needed
for each Blue ray DVD player, DVD player or CD player.This sound bar provides one optical and two c-
oaxial digital inputs for the connection of your components. Please connect your components(e.g. Blue
ray DVD player, DVD player or CD player) to the appropriate digital inputs and press the INPUT button to
match your connection.
Note:
HDMI can carry audio and video signal, But optical and coaxial cables carry only the audio portion of the
signal. A video connection must also be established for an Blue ray DVD player and DVD player. Compo-
site video (yellow RCA connector) can also be used. It is important that the same type of cable (composi-
te) that is connected from Blue ray DVD player and DVD player to the TV .

Operating Your Sound Bar
Front Panel Introduction
9
123456
1.
3.INPUT
Press repeatedly to step through the input sources
in the following sequence:DVD,TV,OPTIC,COAXIAL1,
COAXIAL 2,HDMI 1,HDMI 2.
4.
Remote control sensor
Receives signals from the remote control.
2.STANDBY
Press to turn your sound Bar on or standby mode.
VOLUME -
Press to turn the sound bar volume down.
7
5.
SRS
7.
VOLUME +
Press to turn the sound bar volume up.
6.
Press to turn SRS on or off.
Display window
Displays a variety of information.(e.g. Sound bar volume,
Subwoofer volume, source etc.)

Operating Your Sound Bar
Overview of the remote control
10
1
3
5
6
7
10
11
12
13
14
4
15
8
9
2