Wirata SP-50S User manual
Model No.
SP-50S
Output Power
20W+10Wx2(RMS)
S/N
≥80dB
Conteller
Volume/ Treble/ Bass
Woofer unit
4” speaker magnetically shielded
Woofer impedance
6 Ω
Subwoofer Dimension
W150 * H225 * D220mm
Satellite Dimension
W86 * H153 * D80mm
INSTRUCTION MANUAL
Model No.:
SP-50S
Please read Instruction Manual before use
& Follow ALL the instructions carefully.
WHAT’S IN THE BOX
PARTS DESCRIPTION
1. Subwoofer –1set
2. Satellite –2pc
3. Input cable –1pc
4. User guide –1pc
5. Remote –1pc
FRONT PANELS & CONTROLS
Front View of Woofer
Back View of Woofer
1. Connect the satellites to the audio output jack on the rear
panel (R &L). As shown in diagram below:
2. Connect an auxiliary source to the audio input jacks in rear
panel.
3.
(1) LED will indicate that the power is on, when you turn the
switch "on" and then accordingly adjust volume to
desired level.
(2) To increase or decrease Bass, kindly use the Bass control
to set Bass level.
(3) Turn up the volume control to adjust main volume.
Notice: High volume can damage your hearing.
(4) Try with different sound equipment, e.g., VCD, DVD,
computer, CD etc.
(5) Press "mode" button to "Bluetooth" function, and open
the Bluetooth function of your phone. The Bluetooth
name is the product's model and then can connect.
HOW TO OPERATE
•High voltage inside, cannot privately.
•Keep dry, cannot expose to water or put flowerpot on speaker.
ENVIRONMENT PROTECTION
Dispose the appliance according to the local garbage
regulations.
Never throw it away to the rubbish, so you will help to the
improvement of the environment.
WARNING
