Wireless Devices P-900 User manual

Sub-1GHz to Internet
P-900 IoT Gateway.
Operation Manual
[Version 4.1]
Connect POCSAG to Internet by WIFI and receive by smart phone.

1
Table of Contents
1. Introduction ...............................................................................................................2
2.. Apparent of P-900 IoT station....................................................................................5
3. Top case view and LED's function.............................................................................6
4. Bottom case view and serial account number...........................................................7
5. Rear case view..........................................................................................................8
6. Installation IoTStations APP for your system...........................................................9
7. Connect to internet..................................................................................................12
8. Addition the new IoT stations on line.......................................................................13
9. Addition alarm devices on line.................................................................................15
10. Reading alarm message, and aleart sound setting….............................................18
11. System reset….......................................................................................................19
12. Specification …. .....................................................................................................20

2
1. Introduction
The Take care system, Fire alarm, Security system, food service calling….
can be directly sending urgent message to own smartphones….
Via IOT Gateway
Into the internet

3
1-1 One Gateway P-900 can be connected to many smartphones….
Up to 256 smart phones can received from 1 P-900 IoT Gateway
1-2 One smart phones can received message from many P-900 IoT Gateways
... … … ………
Via IOT Gateway
Into the internet

4
How it works? The P-900 IoT system !
a. Sub-1GHz POCSAG transmitter (148,315,433,426,457,868,915...MHz)
such as our products Pendant TX, Watch TX, Alarm TX, Nurse call systems
POCSAG Transmitter modules..etc.
(Like Items from WDIT :M-810,M-820,M-840,WD2,M-838,M-909K,M-916,
NP-14, EM-898,w009 modules.....)
b. P-900 IoT gateway: When receives the POCSAG code, which will be
transferred to internet through the Wi-Fi AP.
c. Via Wi-Fi AP connect to Internet.
e. Via internet by Wi-Fi or by GSM, 3G,4G, LTE, global mobile phone
system….sending the alarm message to your smart phones...

5
2. Appearance of the P-900 IoTStation.

6
3. Top view of the case and LED functions.
Power ON Indication
Indicate the power status:light would be on when power is on.
ON the Internet Indication
Indicate the Wi-Fi status: light would be on when connected to a Wi-Fi.
Wireless Communication indication
Indicate the sub-1GHz contact and system reset status:
Fast flash means the ready to make the system pairing;light for pairing mode.

7
4. Bottom view of the case and serial number etc…
QR code icon
The QR code stickers on the rear case shows the account number for system registration
Plus more and more smart phone into the system.
Just take this QR code by the phones.

8
5. Rear side view of the case:
12V1A
The system power supply DC in connection: DC12V >0.5A
Micro USB Jack
For the firmware upgrade purpose and also for the dealers software programming.
Match/Reset button
To match the assigned transmitter devices pairing and for the system reset.

9
6. Installation of IoTStations App for Android system
6-1 Step1: Download APP by QR code
Use QR code reader to scan the QR code of the following via your smart phones
Usually the latest APP QR
code will sticker on the top of
packing box

10
6-2. Step2: After completing download IoTStations APP. Then install the IoTStation app.
6-3. Step3: Open the IoTstation App and click on "Add Brand New Station"
(1
st
time to set-up must click Add brand New…..)
Also plug new one and more one click Add Existing ststion(s).
Please make sure your mobile device is connected to a WiFi, the same WiFi will be used
to connect to IoTstation.
6-4. Step4: Click on "NEXT:SELECT IOTSTATION"

11
6-5. Step5: Select √the IoTStation to add, and click on "NEXT:INPUT IOTSTATION
PASSWORD"
6-5. Step6: Please Set the Password for the IoTStation
Password can be set within 4-7 digits English and Number.
12345
√

12
Then click on the "SAVE,NEXT:CONNECT TO WIFI".
6-6. Step7:Please Enter the Password for your Wi-Fi.
See your Wi-Fi password. Then key-in that. and click [Connect to internet].
If the Wi-Fi A/P no need password just click [Connect to internet].
After successfully setting the IoTStation, you should see a new IoTStation added here.

13
7. Add more smartphone on your IoTStation.
7-1. Click on “Add Existing Station”
7-2. Use your smart phone to scan the QR code on the bottom side of IoTStation.
7-3. key-in the password into your screen...
This password must same with Item 6-5 (page 11) your set-up before.

14
7-4. click [Save]..
Success fully added the new smartphone on your IoT station.

15
8. Installation of IoTStations App for IoS (iphone) system
8-1 Step1: Download IOS (i-phone) APP by QR code
Use QR code reader to scan the QR code of the following via your smart phones
Usually the latest APP QR
code will sticker on the top of
packing box

16
8-2. Select AP at home (also office)
自宅で AP を選択する（オフィスも同様）

17
8-3. clic Next...
次へをクリックします。

18
8-4. Now ! Please cilc [Home ey] bac to Main screen then clic → set-up
今すぐ！ ホームキー]をメイン画面に戻し、→ をクリックしてください。

19
8-5. Select Iot station
Iot ステーションを選択