Wirquin Chrono 50120560 User manual

www.wirquin.co.uk
CHRONO UNIVERSAL WC FRAME
BS 1212-4
COMPLIANT
290821
A_05/2020

IMPORTANT INFORMATION -
PRIOR TO INSTALLATION OF THE WC FRAME
100
360 175 - 280
1063 - 1278
288 - 503
Read the instructions carefully.
Ensure product contents are complete.
Check the product for any signs of damage
It is recommended that a technically competent installer undertakes installation.
It is the installer’s responsibility to carry out a thorough assessment of the installation
environment (i.e. wall type/structure) and use appropriate fixings.
Care should be taken when drilling to avoid any hidden wires or pipes.
Use appropriate Personal Protective Equipment at all times when installing the product.
CLEANING
Clean push plate with warm soapy water. Do not use any bleach or detergents.
Component Description QTY
A Float valve 1
B Flush Valve 1
C 90 ° WC Pan Connector 1
D WC Pan Connector Bracket 1
E Floor Fixing Bolts 6
F Flexible WC Pan Connector 1
G Flushpipe 1
H Flushpipe Bung 1
I Push Plate Clips 2
J Push Plate Bracket 1
K Push Plate Cable Connector 1
L Push Plate Not Supplied in qty 1
M Wall Brackets 2
N Wall Plugs 2
O Wall Screws 2
P Washers 2
Q Nuts 6
R Wall Fixing Threaded Bar 2
S Pan Fixing Threaded Bar 2
T Washers 2
U Nuts 4
V Pan Fixings Sleeve 2
W Pan Fixing Cover Cap 2
X Isolation Valve 1
Y Isolation Valve Fibre Washers 2
For use during first fix QTY
1 Cistern Cover 1
2WC Pan Connector & Flushpipe
Cover 1
3 Pan Fixing Threaded Bar Sleeve 2
2

A
B
C
F
G
H
L
I
J
K
MR
S
W
TUV
NO
PQ
D
E
2
1
3
x2 x2 x2
x2
x2
x2
XYx2
3
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
COMPONENTS
x2
x2
x2
x2
x2
x2
x2

1
1
1000 mm
220 mm
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
clic !
1HEIGHT ADJUSTMENT
Secure the pan connector
into the bracket
C
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
clic !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
clic !
2WC PAN CONNECTOR
INSTALLATION
1
2
4

E
3
MR
N
OP
Q
x2
x2
x4
x6
x2
x4
WALL & FLOOR FIXINGS
x6
5
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
clic !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
clic !
M
E
NOPQR
60 mm
1 - Drill the hole for the feet mountings,
2 - Insert the drive studs
E
and tighten them
with a wrench,
3 - Position the wall brackets and fix them to the
wall. Cut the rod if required.
1
2

4WATER FEED
Xx1
The water feed can be positioned either top,
back or side
Yx2
1
OPTIONAL - FLOW RESTRICTOR
2
A flow restrictor is supplied and should only be
fitted when the water supply is mains fed.
Ensure all pipework is clear of debris before
connecting the water supply.
6

U
x2
x4
7
Define required wc pan centres (180mm or 230mm)
by measuring the distance on the back of the pan.
5
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
L = l1 + l2 +20mm
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1
1
1
WC PAN FIXINGS
l1 l2
Thickness
of wall Thickness of pan
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
WARNING
Maximum wall thickness (50mm)
S
2
2

6
8
FIRST FIX
x2
221 3
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1
1
1
2
2
171 mm
131 mm
581.5 mm
220 mm
355 mm
Ø139 mm
180mm/230mm
Ø60mm
M12
2
320 mm

WT U V
x2 x2 x2 x2
G
9
7FLUSHPIPE / WC PAN CONNECTOR INSTALLATION
H
Fx1
1
4
2
3 5
1
1
2
2
2
*: length of the sleeve 51 mm to 110 mm
x1x1

8FINAL COMISSIONING
10
Allow the cistern to fill and check thoroughly for
leaks around the toilet, cistern, water inlet, flush
pipe and waste connections.
Hold the inlet valve down to cause the cistern
to internally overflow. Ensure that the overflow
can discharge the incoming water. If necessary,
reduce the incoming water flow by partially
closing the isolation valve.
Ensure the divertor is positioned to allow the
discharged water a clear unobstructed passage
into the cistern.
Check that the inlet valve shuts off on the water
line indicated inside the cistern. If adjustment
is needed, move the float up or down the
notched stem as required until the inlet shuts
off on the water line indicated.
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
ATTENTION
1
2

9
11
PUSH PLATE INSTALLATION
2 3
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
J
Ix2

10
HELPLINE
Should you require any technical help in association with your Wirquin products, please call our customer service
number 0333 222 44 88 with your query.
WARRANTY: 10 Years
For more detail on warranty information, please visit our website: www.wirquin.co.uk
www.wirquin.co.uk
WIRQUIN Ltd | Warmsworth Halt Ind Est | Warmsworth | Doncaster | DN4 9LS
PUSH PLATE INSTALLATION
2 3
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
1
2
1h30 1h00 30 mn 15 mn 10 mn
1 2 3
click !
L
K