Wise PT863 User manual

Ultra High Purity
Pressure Transmitter
Manual
PT863 (Standard Type)
English

For safe use, Please read this manual before operating the product.
Misuse of the product could cause the harm to users, and also could create the malfunciton of the product.
02
Safety Manual Guide
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Do not apply over pressure or excessive voltage.
Please avoid excessive weight, Vibration, and impact to the transmitter.
It could cause the rupture, and the leaked fluid or material could be harmful to the environment.
Allowed Operating Temperature (Tamb = -20 ~ 80 °C)
Excessive temperature could cause the malfuction of the transmitter and measuring error.
If explosive gas is present, use correspoing enviromental entity approved products,
and do not disassemble or assemble the transmitter in such area.
Before disconnecting the transmitter, user must make sure that the valve is closed so the measuring fluid would not leak.
The leakage could cause the suffocation and explosion.
Installation of transmitter must be performed according to this manual.
Do not temper transmitter to add new function to it.
For repairing Purpose, please consult the manufacturer.
Warnings
English

03
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
Outline
Characteristics
Specification and Standard
Process Connection Type and Size
Each Part Name and Working Principle
Ground Connection
Name Plate
Diagram and Wiring
Transfer, Storage, and Cautions for Opening the Package
Connection Area
Maintenance and Operating Cautions
Safety Measures
Limited Warranty and Limitation of Liability
04
04
04
05
07
07
08
09
10
10
11
11
11
Contents
English

PT863 Series is a High Precision Transmitter to measure pressure in a various industry area. Especially,
it is developed to serve the needs for high purity area such as Semiconductor and Pharmaceutical industry.
04
1. Outline
1)
2)
3)
4)
5)
6)
Reponsive time within 20ms of Output Current
Improved performance, Precision, and Reliability
0.1 % Error rate during 1 Year
Slim Design
Accrracy within ± 0.25 %
4-20 mA Output Current
2. Characteristics
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
Power
Working Temperature
Temp. Compensation
Allowed Humidity
Allowed Altitude
Power Consumption
Process Material
Measuring Range
Accuracy
Material
Method to attach Label
:
:
:
:
:
:
:
:
:
:
:
12 ~ 24 V DC
-20 ~ 80 °C (PT863)
-20 ~ 60 °C
Below 85 %
Below 1000 m
4 ~ 20 mA
Fluid, Gas
-15 ~ 30 psi (Min), -15 ~ 3000 psi (Max)
Span ± 0.25 %
Process mdeia - Gases and liquid compatible with stainless steel 316L, 630
Housing - Stainless steel 316L
On the side of Cylinder
3. Specification and Standard
English

05
English
4. Process Connection Type and Size
1-1) PT861, PT862, PT863

06
English
1-2) PT861, PT862, PT863

1)
2)
3)
4)
Shield Wire and outer surface is connected together, and Cable shield wire should be connected to Ground Terminal.
Ground Cable wire is AWG24, and in case of using Extension wire, the standard should be higher than Ground Wire standard.
In case of working on the terminal, to prevent the unwinding, use washer and to prevent the corrosion, use plated terminal and lug.
Ground point should be connected to rebar, floor, or Bus Bar.
(Ground Point should be considered with a local Industrial regulation, and Electric standards)
6. Ground Connection
1) Each Part Name
2) Working Principle
①
②
③
Pressure applied to the pressure input section, and the pressure value will convert into an electronical singal.
Measured pressure will be transferred after converting into 4 ~ 20 mA electrical current.
If requires zero adjustment, open the cap and turn with tool. (Zero trim : ±1.0 %)
5. Each Part Name and Working Principle
2 Wire Connection Socket
Pressure Input Section
Body
Zero Adjustment
07
English

08
English
7. Name Plate

09
English
1) Diagram
2) Wiring
8. Diagram and Wiring
Transmitter
Power Supply Indicator PLC or Data Gathering System
RED BLACK
14
23
+ (RED)
[Standard]
CABLE
- (BLACK)
FG (WHITE)
(+)
(-)
14
23
+ (BROWN)
[M12]
CABLE
- (BLUE)
(+)
(-)

1)
2)
3)
4)
Transfer Caution
• Avoid dropping of the PT, it will cause a performance degradation.
Storage Caution
• Avoid humidity, vibration, and dust.
• Avoid falling, and prevent the damage from the overload.
Opening Caution
• Be careful when opening the pakage.
• To prevent falling, open the pakage in a wide area.
Opening Steps
• Removal of Box → Removal of Vinyl Cover → Removal of internal Vinyl inside Cleanroom
9. Transfer, Storage, and Cautions for Opening the Package
1)
2)
3)
4)
5)
6)
7)
For safe use, avoid humid, vibration, and corrosive gas in the installation area.
Avoid area where it can excess the temperature listed on the manual.
For choosing installation site, Please consider the possibility of Lightning and steam damage.
Avoid a direct sunlight.
In case of installing on the pipe, use a proper spanner.
Do not remove the protection cap from the Trasnmitter before installation.
If the Transmtter is detached, please place the protection cap back on the Transmitter.
10. Connection Area
10
English

1)
2)
3)
Warranty Period is 1 year from the date purchased, the damage from Misuse and any other abnormal use caused issues will not be covered.
Warranty Period will not be extended by other resellers.
To receive Warranty Service, send the transmitter to WISE with the product issue stated.
13. Limited Warranty and Limitation of Liability
1)
2)
3)
4)
5)
6)
Working pressure should not be over 100 % of its Maximum pressure.
Do not apply overpressure.
Avoid sudden pressure or sudden decompression.
Scheduled examimation should be 1 or 2 times in every 6 months.
If measured pressure error is suspected, then detached the Transmitter for the examination.
If Transmitter is worn out, it is exposed to any other harsh environment, then the measuring error could be found,
it is recommended to replace the Transmitter.
Consult licensed Technician for repair to avoid fire, electric shock, or injury.
11. Maintenance and Operating Cautions
1)
2)
3)
4)
5)
6)
7)
This product should not be treated as unclassfied industrial waste.
To prevent the malfunction of the product, please use it within the defined usage.
Read all instructions carefully.
Between terminals or terminal surface area, do not apply more than normal voltage.
If the transmitter is damaged, disconnect the power and pressure from the transmitter to avoid any explosion.
If malfuction occurs, do not use the transmitter.
Use allowed normal electric cable only.
12. Safety Measures
11
English