Wisenet SHB-9000H User manual

SHB-9000H
TNB-9000 Housing
User Manual

2_ Safety Instructions
Safety Instructions
SAFETY INFORMATION
The safety instructions below are prepared to avoid physical or monetary damage from an accident,
so please read carefully and follow them.
~Do not install the product in a place that contains salt or produces the sulphurous gas.
~Do not insert metal objects or inammable substances inside.
~Otherwise, it may cause an electric leakage or shock or a re.
~Put a neutral detergent on the cloth that is used to wipe on the window surface.
※Since the window part is made of polycarbonate, be careful not to scratch it.
~Do not use chemical substances such as thinner and benzene.
~Use the right tools and wires to install the product in compliance with the safety instructions.
Hanwha Techwin cares for the environment at all product manufacturing stages, and
is taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin's devotion to creating environmentally
friendly products, and indicates that the product satisfies the EU RoHS Directive.

English_3
! INTRODUCTION
PRECAUTIONS BEFORE INSTALLATION
Ensure you read out the following instructions before installing the camera:
~Install the system based on the following directions. If you want to install using a dierent
method, you should conrm the safety recommendations by making a request to the
manufacturer in advance.
~The weight of this housing is 7 kg (or 11 kg or less if the camera is included). When handling the
housing, you must wear an adequate pair of non-slip gloves and be careful when you lift the
device.
~You need to install this in an area where the weight of 4 times 14.5 kg (the total weight of the
housing with the installation bracket and camera included) can be sustained.
~When mounting the SHB-9000H Housing to a wall, please use the dedicated bracket, SBB-900.
※If you have to use any bracket other than this, please use the standard screw (1/4-20X1/2) to join the
housing and bracket.
~Using any products other than the dedicated one has a potential safety risk that might lead to an
accident.
~For screws and washer used for joining the housing, you must use the accessories shipped
together with this product.
※Using any other accessories than the ones shipped with this product or non-standard parts has a potential
safety risk that might lead to an accident.
~Fuses(Ratings 3A, 250V)
~Warning to service personnel
CAUTION: Double pole, neutral fusing. Disconnect mains before servicing.
ATTENTION. Double pôle/fusible sur le neutre. Débrancher lalimentation avant lentretien.
~After successfully installing the product, use a lock to lock the xing latch part. (Page 6).

4_ introduction
PRODUCT OVERVIEW
~SHB-9000H Housing is designed to protect TNB-9000 camera from external environment.
Introduction
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
Appearance Item Name Quantity Remarks
User Manual 1
Screw (1/4-20 X 3/8),
Length(9.5 mm) 1
Fitted in camera tray for
easy CAM installation
Screw (1/4-20 X 3/4),
Length(19 mm) 1
Custom alignment clip &
spacer (Aluminum) 1
Spring Washer 2
Medium Gasket 1Fitted in camera tray
Spanner 1
Enclosed in accessory
bag
Screw (1/4-20 X 1/2),
Length(12.7 mm) 3
Flat Washer 3
Spring Washer 3
Large Gasket 1
Power Pole Female
Connector
(Available in the US and
Canada only)
1

English_5
! INTRODUCTION
OPTIONAL LENS
The following lenses compatible with TNB-9000 are separately sold.
Item Name Model Name
Lens
Canon 24mm f1.4L, Auto-Iris
Canon 35mm f1.4L, Auto-Iris
Canon 50mm f1.4, Auto-Iris
Canon 85mm f1.2L, Auto-Iris
Canon 100mm f2.0, Auto-Iris
Canon 200mm f2.8L, Auto-Iris
※
If the Stabilizer function is supported for the lens being installed, mount it together to the Housing for better stability.
INCLUDED MOUNTING ACCESSORIES
※
This mount is NOT included in SHB-9000H/KDO model, please check the product label.

6_ introduction
Introduction
COMPONENT NAMES AND FUNCTIONS
※This device must be installed by a skilled person, not by an ordinary person.
Sun shield
Cover
Fixing latch
※Please use a lock hook of which thickness is no more
than 3 mm.
Camera Spacer
FAN
Front glass window
Terminal for power supply connection
DC 12V connection adapter
Fuses(2EA) : Ratings (3 A, 250V)

English_7
! INSTALLATION
Installation
INSTALLING THE CAMERA
Camera tray
TNB-9000
Spring washer
Screw (1/4-20 x 3/8)
Spring washer
Screw (1/4-20 x 3/4)

Installation
8_ Installation
INSTALLING THE BRACKET
※
SBB-900 Bracket mounted to the Housing is separately sold.
Spring Washer
Screw (1/4-20 X 1/2)
SBB-900
Flat Washer
Sun shield
Housing

English_9
! INSTALLATION
HOW TO CONNECT THE POWER SUPPLY AND NETWORK(ALL
REGIONS EXCEPT THE US AND CANADA)
The camera is designed to connect the cable to the port (compressive tting) on the bottom side at
the rear of the housing.
Unfasten the nut of the compressive tting at the rear of the housing and insert the power cable
and the network cable from the outside of the housing inside of it according to the size of each hole.
※
Make sure to fix the power cable and camera output cable (e.g. network cable) apart from each other on the
primary side when installing it.
Network cable
Power cable
Compressive fitting for
cable connection
AUDIO
OUT
AUDIO
IN
USB
HDMI
SFP
HPoE
NETWORK DC 12V
RESET
1
1 : ALARM IN
2 : ALARM OUT
3 : GND
4 : NC
5 : RS-485+
6 : RS-485-
2 3 4 5 6

Installation
10_ Installation
HOW TO CONNECT THE POWER SUPPLY AND NETWORK(THE US
AND CANADA ONLY.)
The camera is designed to connect the cable to the port (compressive tting) on the bottom side at
the rear of the housing.
Unfasten the nut of the compressive tting at the rear of the housing and insert the power cable
and the network cable from the outside of the housing inside of it according to the size of each hole.
Products exported to North America are provided with a cable where a pin male connector is connected
to the power supply part.
Use it by connecting (brazing) the power cable to the provided pole female connector.
※
Make sure to fix the power cable and camera output cable (e.g. network cable) apart from each other on the
primary side when installing it.
Power cable
Compressive fitting for
cable connection
AUDIO
OUT
AUDIO
IN
USB
HDMI
SFP
HPoE
NETWORK DC 12V
RESET
1
1 : ALARM IN
2 : ALARM OUT
3 : GND
4 : NC
5 : RS-485+
6 : RS-485-
2 3 4 5 6
Network cable
Connecting via brazing
GND
LINE
NEUTRAL

DIMENSION
unit: mm
Specifications

Head Oce
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : [phone] Fax : [phone]
www.hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free +1.877.213.1222 Direct +1.201.325.6920
Fax [phone]
www.hanwhasecurity.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel [phone] Fax [phone]
www.hanwha-security.eu
Hanwha Techwin Vietnam Hanoi Office
28th Floor, Handico Building, Pham Hung Street, Me Tri ward,
Nam Tu Liem District, Hanoi City, Vietnam
Tel : [phone]
http://hanwha-security.com