Wisenet SPN-10080P Installation guide

NETWORK SWITCH
Quick Manual
SPN-10080P
SPN-10080PM

Copyright
©2017 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of
their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly,
without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the right
to change the contents of this document without prior notice.
Design and specications are subject to change without prior notice.
Network Switch
Quick Manual

3_ English
overview
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil
constituents as they may deform or cause damage to the product.)
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Standards Approvals
J `Any changes or modifications in construction of this device which are not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
M
` This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
BEFORE START
This manual provides operational information necessary for using the product and contains a description about each
component part and its function as well as menu or network settings.
You have to keep in mind the following notices :
•Hanwha Techwin retains the copyright on this manual.
•This manual cannot be copied without Hanwha Techwin's prior written approval.
•We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
•Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
•Before adding a hard disk drive or external storage (USB memory, USB HDD, etc), check if it is compliant with this
product. For the compatibility list, contact the retailer.

4_ English
overview
Package Contents
Make sure you have all of the following.
(Accessories may vary depending on the country of sale.)
DC 9V-36V
Switch body Power cable Quick Manual
Fixing screws
PRECAUTIONS RELATED TO INSTALLATION AND USE
•Users should not disassemble the switch arbitrarily.
•Users should be careful when handling the switch.
•Users should not punch or shake the switch. The user should take care not to cause damage due to careless
storage or incorrect operation.
•The switch should not be installed in places where it rains or where there is high humidity. It should not be operated
in wet environments.
•The switch body should not be cleaned using a harsh abrasive. When it gets dirty, it should be cleaned with a dry
cloth.
•The switch should be installed in a cool place, away from direct sunlight.
•Direct sunlight may negatively affect the product.
•Ensure that there is adequate ventilation around the switch when installing the switch on a shelf or rack.
•Be sure to visually check the power cord (power cable) for any abnormality before connecting to the power supply.
•Allow sufficient space around the product for heat dissipation.
•Do not place heavy objects on the product.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery
return system.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide
customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates
that the product satisfies the EU RoHS Directive.

5_ English
overview
Rear
Part Names Functions
a
LED lamp
POWER Shows the power On/Off status.
b
PoE1~8 When the PoE camera is connected, the LED will blink.
c
Giga port Displays the LINK/ACT connection status.
d
G1, G2 The main set or switch is connected to a Gigabit Ethernet port.
e
PoE1~8 PoE camera connection terminal.
f
Power input (DC 9 - 36V) Terminal to connect to the power supply.
Use the power cable provided when purchasing the product.
J `The maximum power of PoE 1 to 4 and PoE 5 to 8 is 32W.
`Please connect/install the camera in a manner that ensures that 32W is not exceeded.
`When 32W is exceeded, the power of the last connected PoE is turned off.
`If 32W is exceeded during operation, PoE power is turned off in order of PoE 4 to 1 and PoE 8 to 5.
`If the power consumption of cameras connected to the set (eg., PoE1 - PoE4) is less than 24W, PoE cameras can be
connected to the powered-off port.
PART NAMES AND FUNCTIONS
Front
•SPN-10080P
•SPN-10080PM
PoE1 PoE2 PoE3 PoE4 POE5 POE6 POE7 POE8 G1
LINK ACT
G2
LINK ACT
POWER PoE1
LINK/ACT LINK ACT
G1
LINK ACT
PoE2 PoE3 PoE4 PoE5 PoE6 PoE7 PoE8 G2
ba
e
d
c
DC 9V-36V
f
POWER PoE1
LINK/ACT LINK ACT
G1
LINK ACT
PoE2 PoE3 PoE4 PoE5 PoE6 PoE7 PoE8 G2
PoE1 PoE5PoE3 PoE7
PoE2 PoE6PoE4 PoE8
G1
G2
ba
e
d
c

6_ English
How to install and connect
DC POWER CONNECTOR WIRING DIAGRAM
DC 9V-36V
ef d
b ac
a
GND Ground signal of the set.
b
c
d
PWR It receives DC 9 - 36V input as the power signal of the set.
e
f
ACC This is a terminal to connect to the car's ACC power.
When the ACC power is on, the set operates.
J `If the ACC yellow line on the power cable is not connected to the power or the car's ACC terminal, the power will not turn on.
HOW TO CHECK M12 TERMINAL PINS
Gigabit Ethernet (M12 8pin A-Code Pinout)
e
gc
ab
fd h
a
pin - 1 Orange - White TX_D1+ RJ-45 pin 1
b
pin - 2 Orange TX_D1- RJ-45 pin 2
c
pin - 3 Green - White RX_D2+ RJ-45 pin 3
d
pin - 4 Green RX_D2- RJ-45 pin 6
e
pin - 5 Brown - White BI_D4+ RJ-45 pin 7
f
pin - 6 Brown BI_D4- RJ-45 pin 8
g
pin - 7 Blue - White BI_D3- RJ-45 pin 5
h
pin - 8 Blue BI_D3+ RJ-45 pin 4
PoE (M12 4pin D-Code Pinout)
b
d
ca
a
pin - 1 Orange - White TX_D+ RJ-45 pin 1
b
pin - 2 Green - White RX_D+ RJ-45 pin 3
c
pin - 3 Orange TX_D- RJ-45 pin 2
d
pin - 4 Green RX_D- RJ-45 pin 6
HOW TO CONNECT TO SWITCH
Connect the Ethernet port of the switch to the Ethernet port of the PC with a LAN cable (RJ-45).
PoE1 PoE2 PoE3 PoE4 POE5 POE6 POE7 POE8 G1
LINK ACT
G2
LINK ACT
POWER PoE1
LINK/ACT LINK ACT
G1
LINK ACT
PoE2 PoE3 PoE4 PoE5 PoE6 PoE7 PoE8 G2
PoE1 PoE2 PoE3 PoE4 POE5 POE6 POE7 POE8 G1
LINK ACT
G2
LINK ACT
POWER PoE1
LINK/ACT LINK ACT
G1
LINK ACT
PoE2 PoE3 PoE4 PoE5 PoE6 PoE7 PoE8 G2
CONTROL BOX RS-232C ALARM BLOCK
CONSOLE
DC 9V~36V
VIEWER CAMERA
WIFI ANT2 WIFI ANT1
PoE1 PoE2 PoE3 PoE4
G1
LINK ACT
G2
LINK ACT
G1
LINK ACT
G2
LINK ACT
Network Camera Network Camera
GIGA Link
GIGA Link
<TRM-1610S>
<SPN-10080P> <SPN-10080P>

7_ English
appendix
PRODUCT SPECIFICATION
Item
Details
SPN-10080PM SPN-10080P
PoE
Maximum PoE Budget 64W(32W + 32W)
PoE Standard IEEE 802.3af / 802.3at
PoE/PoE+ Ports Port 1 ~ 8 : PoE/PoE+
Performance
Switching Capacity 2.8Gbps
Compatible Devices
Network CCTV Devices WiseNet Network Cameras, TRM NVR Series
Interface
1000Base-T Interface 2 (M12, A-Code, 8P Female) 2 RJ-45
100Base-T PoE Interface 8 (M12, D-Code, 4P Female) 8 RJ-45
MDI/MDIX adjustable Yes
Power Input Molex 6P -> 6P Gender Included
Indicator
LED
Power Status : 1 EA
G 1 : Link 1 EA, ACT1 EA
G 2 : Link 1 EA, ACT1 EA
PoE(1~8) Link: 8 EA
Item
Details
SPN-10080PM SPN-10080P
General
Dimension (W x D x H) 270 x 134 x 93mm
Weight 2.68 Kg 2.6 Kg
Operation Temperature -40 ~ 75°C
Operation/Storage Humidity 0% - 95% RH
Maximum Power Consumption 95W
Power Input 9 ~ 36 VDC (Fanless)
Color/Material Black / Al
Standard Approval
General CE, FCC, cUL
Special EN-50155 (Rail Shock/Vib)
EN-50121-4 (Railway EMC)

8_ English
appendix
PRODUCT OVERVIEW
• SPN-10080P
unit : mm (inches)
• SPN-10080PM
unit : mm (inches)

Head Oce
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : [phone] Fax : [phone]
www.hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free +1.877.213.1222 Direct +1.201.325.6920
Fax [phone]
www.hanwha-security.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel [phone] Fax [phone]
www.hanwha-security.eu