Witura WT-2000 User manual

W
WT T- -2 20 00 00 0
G
G
GS
S
SM
M
M
F
F
Fi
i
ix
x
xe
e
ed
d
d
W
W
Wi
i
ir
r
re
e
el
l
le
e
es
s
ss
s
s
P
P
Ph
h
ho
o
on
n
ne
e
e
User Manual

2
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Thank you for choosing our Fixed Wireless Phone (Fixed Cellular Phone).
Before using this phone, please kindly read this user manual carefully.
This is our new design, which uses GSM networks to operate. You can dial the local
calls, domestic and international calls with this phone by a standard SIM/R-UIM
card. It is widely used in these areas:
Remote country
Mountains
Dwelling house with weak signals
Public telephone shops/call shops
Offices
Removable places such as Ships, Trains, Long distance buses
Our wireless phone also has these characteristics as below:
No need extra communication cable/land line cable
Easy to install and easy to maintain
Powerful capacity of signals receiving
Clear talking setting
Long using life
Steady performance
Cautions
1. This phone should not be used at garage, oil storage, and chemical plant or
near to any inflammable or explosive substance.
2. This telephone should be avoided in the hospital. It will interfere with
medical electronic equipments such as pacemaker and audiphones.
3. If it is found that the telephone is not successful in login onto network,
please check whether your SIM card or antenna is well installed.
4. It is blocked to touch the antenna when the phone is being used. (Being
making calls or receiving calls), otherwise the telephone will be damaged.
This kind of damage is beyond the range of warranty.
PRODUCT INTRODUCTION
CAUTION AND STORAGE

10
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Troubles
(Display on LCD) Reasons Solution
1. No display when
turn on the phone
1. There is no power for
the backup battery
1. Recharge the phone with
power supply
1. No SIM Card
1. The phone Card is
installed incorrectly
2. The phone card is
broken
1. Install the phone Card
again
2. Change another phone
Card
1. No Signal display
or the signal is
very weak
1. The antenna is installed
incorrectly
2. No signal or the signal
is too weak
1. Install the antenna again
2. Put the Phone to another
place
1. The phone cannot
be charged
1. The charger is broken
2. The battery is damaged
1. To replace another
charger
2. To change another
battery
1. The phone has the
signal but cannot
make calls
1. Your telephone number
is out of charge
2. The phone have no
enough power
1. Please charge your
telephone bill
2. Please charge your
phone
1. The phone cannot
register to the
networks.
1. Your phone number is
invalid
2. No Signal or the signal
is too weak
1. Check with your
networks operator
2. Put the Phone to another
place
TROUBLESHOOTING
3
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]m
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
5. When the telephone is being used, it should be placed where signal is strong
enough. In order to ensure good voice quality, the telephone should be far
from other electronic equipment (at least 1 meter far away).
6. Don’t use chemic substance to clean the telephone, but use dry soft cloth to
clean it.
7. Don't disassemble the telephone by yourself. If there is any problem, please
contact the authorized personnel.
Storage:
1. The telephone that is packed or not could piled up no more than 10 layers.
2. The telephone should be saved in ventilate and dry place.
3. Don’t knock the telephone to avoid breaking the case.
The key characters/ functions of the phone are listed as below:
1. Suitable for GSM networks
2. Built-in high quality Industrial Module with powerful signals-receiving ability
3. Support Hand free, Caller ID, Radial and Second-Dial function.
4. Support English SMS and Voice Mail
5. With powerful Phone Book which can store 40 contact names
6. With Intelligent STK and Security Management
7. Records history: auto saves the last 20 dialed/received phone numbers, and
last 20 missed calls
8. Incoming calls bar & unbar, outgoing calls bar & unbar, International calls
bar & unbar enable
9. Support Call transfer and call waiting
10. With Dot LCD to display the networks provider, date & time, battery status
and signals strength.
11. Built-in 5PCS 16 chords music ringing tones
12. With Alarm clock
13. Built-in powerful backup battery and the standby time are up to 72 hours.
KEY FUNCTIONS AND TECHNICAL INDEX

4
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Following are the key technical index of this phone:
1. Networks support: GSM900/1800MHz
2. Frequency range:
GSM 900MHz (Transmits: 890-915MHz, Receives: 935-960MHz)
GSM 1800MHz (Transmits: 1710-1785MHz, Receives: 1805-1880MHz)
3. Voltage: DC 5V/1A
4. Stand by hours: 72 Hours
5. Talk time: 2-6 Hours
6. Charging time: 6 hours
7. Power consumption:
8. Static≤25MA Emission≤500MA
9. Peak power consumption: 0.25W/0.5W
10. Receive sensitivity: -106db
11. Antenna increment: All directions: 3.5db Certain/Selection: 12db
This phone is a wireless communication device. So it is very important for you to
install the phone in a proper place. To place the antenna in a proper place is a very
important for you to get a powerful signal.
1) Behind the WT-2000 battery, you will see a SIM card clip.
2) Slide in the SIM card with the arrow showed above along the clip.
3) Slide the SIM card into the SIM door making sure that the clipped corner of
the SIM card lines up with the clipped corner of the SIM card holder.
4) Make sure the SIM card chip is in the proper location with the SIM CARD
detector.
PHONE INSTALLATION
KEY TECHNICAL INDEX
INSTALL THE SIM CARD
SIM
9
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]m
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
If you are Busy, in Unconditioned, Unavailable or cannot reply the calls, then
you can choose the Call Waiting, Call Forwarding or Call Baring functions for
your wireless phone. But make sure that your networks can support these function
at the same time.
You can choose to activate the Auto Redial function or Any Key Answer
function to answer the phone
You can choose the Ringing Tone for your wireless phone. There are 5 ringtones
for your choice. You can choose one of ring for your incoming calls and SMS alarm.
Of course you can also adjust the Volume strength for your phone.
This wireless phone can display the Date and Time in real-time. You do not need
to reset the Date and Time by manual even you use your wireless phone at the
first time. But of course you can adjust the Date and Time, choose the Time
Format by yourself. And your wireless phone can also ser Alarm clocks at the
same time to remind your daily work or plans.
5. Clock
4.4 Audio Setting
4.2 Network Setting
4.3 Call setting

8
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Voice Mail from others too.
Your wireless phones have a Phone book which can store 40 names or contact
numbers. And the memory storage capacity of your SIM card depends on your SIM
card provider. You can Search the contact names, Add new contacts, Delete the
contacts, Select to store the contact to your phone or SIM card and check the
Memory capacity status by pressing the Up &Down key and Menu/ OK key very
easy.
You can check the Missed Calls,Received Calls,Dialed Calls and any other
calls very easy. And you can also check the Duration and Reset the timer for All
Calls on your wireless phone. You can check the detailed information such as
caller's name, caller’s telephone number, call date and time etc. Then you can
decide if you want to Call back to the caller, Delete the calls details, Store the
caller's information and so on.
This wireless phone can display the Date and Time in real-time. You do not need
to reset the Date and Time by manual even you use your wireless phone at the
first time. But of course you can adjust the Date and Time, choose the Time
Format by yourself. And your wireless phone can also set Alarm clocks at the
same time to remind your daily work or plans.
You can make a lot of customization settings for your wireless phone as below:
You can adjust the Contrast of the LCD for your wireless phone. And you can also
turn on or turn off the Keypad Volume by yourself. Besides that, you can choose
to Lock keypad, change your PIN code or Password service and ensure your
wireless phone in safety use or in security.
2. Phone Book
3. Call Log
4. Setting
4.1 Phone Setting
5
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]m
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Notice: Before you install your SIMs card into your wireless phone,
make sure that the phone is in power off status. Or your SIM will be
damaged.
1) Please insert your SIM card, and install the handset.
2) Insert the power supply and press the ON/OFF key for 3 or 5 seconds at the
right side of phone. Then the backlight of the LCD will turn on.
3) Your wireless phone will take about 10 seconds to search and register the
networks. Then you will see the networks provider/operator's name, signal
status, time & date and the battery status on the LCD. It means that your
wireless phone is in succeeding installation and you can use your wireless
phone now.
Notice: If you use your wireless phone at the first time, then please
recharge your phone for at least 4 hours because the backup battery is
lack of power.
There are 24 keys on your wireless phone keypad. It contains 10 number keys, 2
symbol keys and 14 function keys. You can know them as below:
OK: Confirm your choice for each step just like the confirmation key.
◄: In hook off status, you can check the Incoming Calls, Outgoing Calls, Missed
Calls, Call Duration list by press this key. And you can reduce the taking volume
when the phone is in hook on status.
►: In hook off status, you can enter the alarm clock setting with the Alarm
Activation, Alarm Time, Alarm Repeat, Alarm Tone, Ring Volume setting.
: In hook off status, you can check the SMS inbox list by press this key. And you
can press this key to choose the previous menu in Menu status.
INSTALL YOUR FIXED WIRELESS PHONE
EXPLANATION FOR THE KEYPAD

6
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
: In hook off status, you can enter into the Phonebook list by press this key.
And you can press this key to choose the next menu in Menu status.
Menu: In hook off status, press this key to enter into your phone menu. Confirm
your choice for each step just like the confirmation key.
Back: You can return to the previous menu when you enter into the Menu.
Phonebook: You can check the telephone number which saved in SIM Card or in
desk phone itself.
ON/OFF: Power On and Off of WT-2000
SMS: In hook off status, you can enter into the Audio Setting menu directly by
pressing this key.
Delete: You can exit your work in edit status by press this key. And you can also
delete the character which you do not need before the cursor for modifying your
work.
Redial: You can redial the latest calls in Hand free status or when you pick up the
handset.
Send: You can save a lot of time after you dial the numbers when you make a call.
It’s a fast way to connect the number you are dialing. And it can also work as a
redial key when you check your phonebook or call list.
HandFree: It's short for Hand free. You can dial the number directly by pressing
this key without pick up the handset in hook off status. And you can also pause the
calling by re-press the key when you make a call in Hand free status. And when
there is an incoming call, you can talk with the caller directly by pressing this key.
There are 10 key from 0 to 9 for make the calls dialing and the other two symbol
keys are" * "and "#".
7
WT-2000 GSM Fixed Wireless Phone
WT-2000 – USER MANUAL – Rev1.1 – Technical Support: [email protected]m
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
You can preview the basic functions of your wireless phone from the below form:
1. Short Messages 2.Phonebook 3. Call Log 4. Settings 5. Clock
2.1 Inbox 2.1 Browse 3.1 Incoming
call
4.1 Phone
Settings
5.1 Date and Time
Settings
2.1 New 2.2 Create 3.2 Outgoing
call
4.2 Network
Settings 5.2 Date Format
2.2 Sentbox 2.3 SIM
Phonebook
3.3 Missed
call
4.3 Call
Settings 5.3 Time format
2.3 Outbox 2.4 ME
Phonebook
3.4 Call
Duration
4.4 Audio
Settings
5.4 Alarm
Settings
2.4 Draftbox 2.5 Storage
status
2.5 Voice Mail 2.6 Abbr. dial
2.6 Settings 2.7 Delete All
Entries
2.7 Delete All
All of the basic functions for your wireless phone are very easy to operate just like
your mobile Phones. You can see the detailed explanations as below:
You can press the Menu or OK key to enter into the menu of your wireless phone.
Then you can preview all of the function by pressing the ◄& ►or & keys.
And if you want to exit the currently menu, then you can press the Back key.
The wireless phone only can support English SMS and Voice Mail (This is depend
on the networks which support the voice mail). You can send and receive English
SMS and Voice Mail very easy. You can check the New SMS in your Inbox, store
the Sent SMS, make the SMS Draft, set the Valid Period of all of your SMS by
Setting function, check the Memory Status for your SIM/R-UIM card and Phones.
And of course if the networks support Voice Mail, you can also send and receive
FUNCTIONS LIST
Enter Into/ Exit the Menu
1. Short Message