Wizard ON-K800 User manual

1
4K KEYFOB CAM
Mini Digital
Video Recorder
User Manual
WIFI CAM
3840*2160

2
Please read this user manual carefully before any
attempt to operate this product and keep it for
your future reference.
Features
* IMX 179 SONY 8.0MP sensor with WDR
* Frame rate up to 120fps
* Quickly video recording and photo shooting
* Wi-Fi Streaming Via IOS/ Android APP
* 4K UHD (3840*2160@25FPS)
2.7K@30FPS/1080P@60FPS;/1080P@30FPS/720P@120FPS/
720P@60FPS (optional)
* Photo Resolution
30M.20M.14M.10M.7M.5M.4M (optional)
* H.264 video compression format
* Maximum support 128GB memory card
* 900mAh built-in lithium battery, fully 50-90 minutes
power life time
* Working while charging , working 24/7

3
Details Image
Insert the memory card before using the camera
Note: Please use an original C10 high speed card, FAT 32GB
or above (including 32GB) memory card, please format the
memory card before using.

4
Charging Instructions
1. Please fully charge the camera before using .
2. Connect the USB cable provide to an external 5V
adapter , power bank or computer to the camera for
charging .
3. While the camera is charging , the camera will
automatically power on ,If you do not need to use the camera
while charging , please power off the camera , the red led
light keeps on .
4. When the camera is fully charged ,the red led light
turns off .
Note: When the device is low battery, the yellow led will
automatically turn off after flashing for several seconds.
Please charge the camera at this time;
Charging time is about 2-3 hours;
The camera supports working 24/7 while charging;

5
Power on / Power off the camera
1. To power on the camera , hold and press the “②”
button for 3 seconds. The yellow led light will indicate after
the camera vibrating.
2. To power off the camera , hold and press the “②”
button for 3 seconds. The camera will turn off after
vibrating .
Note:
If NO Memory Card is inserted , the yellow led will keep
flashing . Please insert a memory before operating .
If the inserted memory card does not be detected by the
camera,the yellow led will keep flashing.Please format the
inserted memory card and operate the camera with the
formatted memory card again.
If a defect memory card is inserted , the yellow led will
keep on and the camera does not operate normally .Now
please format the memory card and reset the camera .

6
Video Recording
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Press the “③” button one time to start recording
after vibrating, recording is indicated with a flashing red led
light.
3. Press the “③” button one more time to stop
recording . The solid yellow led will return .
Note: The camera will continuously record 5 minutes long
sequences for video recording mode .
Photo Shooting
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Press the “①” button one time, the camera will take
a photo after vibrating , and the red led flash once .

7
Turn on/off the indicator led light
1. Hold and press the “②” button for 3 seconds to
power on the camera . The yellow led light will indicate after
the camera vibrating.
2. Then hold the “①” button for 3 seconds , all
indicators turn off after vibrating.
3. Hold the “①” button for 3 seconds one time, all
indicators turn on after vibrating.
Note: The camera has memory function, after setting the
indicator on/off , even if cut off the power, we do not set it
again.( Once the indicator is turned off, the camera indicator
remain off when the camera is turn on again.)

8
APP Download
Please download the “ 4k cam ” app before using the camera
in wifi mode .
1. Scan the QR Code to download APP
2. Search the “ 4K Cam APP” name in APP store and
Play store to download the app.
4K Cam App
4K Cam
Download from App Store
( IOS)
Download from Play Store
( Android )

9
WIFI mode
1. Hold and press the“②” button for 3 seconds to power
on the camera . The yellow led light will indicate after the
camera vibrating.
2. Hold the “③” button for 3 seconds. The camera
change to WIFI mode after vibrating. At this time, the blue
indicator flashes slowly.
3. Then enter the phone setting where WIFI signal
inside, find out the camera WIFI hotspot and connect it . As
the photo showing below:
Camera WIFI Account:
WIFI_XXXXXX
Default Password:
1234567890
Note: Please modify the SSID
and password in time after
connecting the device to
ensure safe use.

10
4. Open the APP "4K CAM " to add connected device
Click: “WIFI Connect” to
add the camera into the app
device listing.
This APP can only add up to
3 cameras.
Note:
After connecting successful , the blue indicator with a solid
led.
In the wifi mode , only one camera can be connected to one
phone at a time

11
About the APP
Delete device
Downloaded
Images Replay
Downloaded
Videos Replay
Exit
Camera
Settings

12
Quantity of
Electricity
Resolution
selection
Memory Card
Images/Videos
Replay
Confirm
Button
Shooting / Recording Switch
Note: In WIFI mode , The camera only accept shooting and record on
APP . No loop recording , while the memory card is full , the APP will
remind you .
Camera
setting Menu
Click the share button
to download the photos
and videos in smart
phone
Browse photos/
videos in
memory card

13
Time setting
1. Connect the camera to WIFI Mode , then the camera
will automatically synchronize the phone system time.
2. Time does not need to be reset unless battery is
exhausted.
Video and photo Replay
There are three ways to replay the videos and images .
1. You can use the standard USB cable to connect the
camera to your computer or laptop.
2. Remove the memory card and use the card reader to
connect to the computer or laptop
3. Replay the videos and images in 4K Cam app
software

14
Product specification
(The above parameters are the average values measured by
the laboratory, please refer to the real product.)
Lens angle:
75 °
Minimum
illumination:
1 Lux
Video format:
MP4
Video compression
format:
H.264 (Advanced Edition)
Video resolution:
4K25FPS:3840*2160;
2.7K30FPS:2720*1520;
1080P60FPS;
1808P30FPS;
720P120FPS;
720P60FPS
Video frame rate:
25fps-120fps
Photo format:
JPG
Photo resolution:
30M.20M.14M.10M.7M.5M.4M
Memory:
Micro SD support 32 - 128GB
USB interface:
USB 2.0
Charging voltage:
DC 5V/1A
Battery capacity:
900mAH

15
Camera Reset
Reset the camera when it does not operate normally , Use a
pin to poke into the reset hole. Click one time the reset
button . the camera will power off , the reset is done . Turn
on the camera to operate it again.
Troubleshooting
1
1.Could not power on
the camera or turn off
after power on the
camera
Low battery : Please fully
charged the battery or
connect the camera to
charger and operating.
2
When reply on
computer , the videos
are Jamming or black
screen
It may be the problem of
playback software , Please
download VLC player to
test .
3
Could not charge
while it is charging
Please use a 5V 2A adapter
for charging
4
The yellow led flashes
quickly after
powering on the
camera
Format the memory card on
computer and operate the
camera again.

16
Precautions
(1) When the device is under video recording status, the body
will heat, which is normal. To ensure heat dissipation, please
use this device in the well ventilated environment. Do not
wrap this device when use it.
(2) Do not place the device in the damp working environment.
The device is not waterproof. Please avoid letting the product
get drenched or exposed to rain.
Important reminders
This product must be used legally. There are specific laws
and regulations governing the use of filming and recording
equipment in all jurisdictions. For any purpose, it is the
responsibility of the user to strictly abide by the relevant laws
and regulations when using any photographing and
recording equipment, and must not violate the regulations on
prohibiting or restricting use.