WMG V8 User manual

User Manual of V8

Content
I Preface …………………………........................................2
II Guarantee ......................................................................2
III Operation of Alarm Clock...............................................4
1 Function features........................................................4
2 Function settings…………………………………………4
IV Instruction of Digital Vi eo………………………………..8
V Operation of Digital Vi eo..............................................8
1 Function features………………………………………..8
2 Store files an play………………………………………9
VI Technical Date of Digital
vi eo.....................................10
VII Power Supple an Packing
list....................................11
VIII Notice........................................................................12

I Preface
Thank you for choosing this pro uct. This manual will gui e you
how to use the pro uct an provi e particular information about
using an operation. Please rea this manual carefully an
comprehensive un erstan . Also please keep this manual
well, we hope this pro uct will help you an take
enjoyment to you.
II Guarantee
The pro uct has passe FCC & CE certifications, which
takes safety an assurance while in using.

Alarm Clock Operation
一、The functional description：
◇ Time display shows the current time,year,month,day.
◇Alarm and snooze function ,you can set alarm and snooze intervals seal(1
60minutes).
◇ Voice broadcast,voice broadcast the current time.
Sound appreciation of the natural features that can appreciate the time(10
60minutes).
二、The feature set:
Current time setting
◇In the time display model,press"SET"key to enter the year,the screen displays
"2010" and flashing through the"UP". DOWN key to set the co ordination.
◇ Press"SET" button in order to set the month →day→hour→minute,set the
corresponding location when the number of the flashes.
Time mode Setting the year Setting the month

Set the date Set the hour Set the minutes
◇press"MODE"key to exit the tine setting,that this has already set a good time.
2.Set alarm time
◇ In the current time mode press "MODE" to enter alarm setting mode, display " : "
◇ Press "SET" button first to set the alarm hour, according to the second set the alarm
minutes, according to the third set the Snooze time interval (1 60 minutes), according
to the fourth set the alarm sound, through the "UP" "DOWN" to choose
Alarm mode Set the alarm hour Set the alarm minutes
Set the Snooze time interval Set the alarm music
.
◇ Press "MODE" key to exit the alarm setting, display the current time mode.
◇ In alarm mode press "UP" key to open the alarm, display the set alarm time, and then
click to open the snooze function, press the third time, turn off the alarm.
Alarm off Alarm on Snooze on
◇ Press "MODE" key to return to time mode.
3. In the current time mode: Press "UP" key can be 12/24 hour conversion; press "DOWN"
key to the temperature: Celsius (℃) / Fahrenheit (℉) the degree of conversion.
12-hour 24-hour

Celsius Fahrenheit
4. timekeeping, natural sound en oy function:
◇ In the current time mode, press the "TALK" key, broadcast the current
time.
◇ In any mode, press the "TIME" key to make time to en oy the natural sound
settings (10-60 minutes).
Set the time to en oy the natural sound
◇In any mode, press "TALK" button for three seconds to enter the natural
sound of the listening mode, by setting a good time to countdown the time to
"00:00" natural sound to stop.
Sound appreciation Natural sound stop
of he natural mode
◇Sound appreciation of the natural mode, click the "TALK" key to pause,
click again and en oy under a natural sound. Press "MODE" key to exit the
natural sound listening modes.
THE END

IV Instruction of Digital Video
The pro uct is a remote igital vi eo timer which has external TF
storage, 30FPS (640x480) high efinition camera an monitor
function. It concentrates igital vi eo recor ing, voice recor ing,
self-vi eo-shooting, web camera, electronic timer an storage
function together. It is configure a built-in high capacity battery
which can recor 12 hours vi eo an 25 hours voice continuously.
The camera is 2M pixels for high efinition vi eo recor ing. An
the pro uct has multi-language talking an voice recor ing. The
storage supports up to 32GB TF memory car . It is also a hi en
security evice with evi ence recor function as a goo assistant.
(Self-vi eo-shooting is automotive sensing vi eo recor ing)
V Operation of Digital Video
1 Function features
1) Open the capping cover on the right si e of the pro uct. Plug in
TF memory car . The machine starts ON.
2) Press button “ ” on remote controller to start by aligning
towar the receiver. Then the blue LED in ictor turns on, an
the machine goes into stan by status.
3) Press button “ ” on remote controller to recor vi eo. The blue
LED in ictor flickers three times to start recor ing, press button

“ ” again to stop an blue LED in ictor turns on.
4) Press button “ ” on remote controller to recor voice. The blue
LED in ictor flickers twice to start recor ing, press button “ ”
again to stop an blue LED in ictor turns on.
5) Press button “ ” on remote controller for photo shooting, the
blue LED in ictor flicker slowly.
6) Press button “ ” on remote controller to start self-vi eo-
shooting stan by status. Press the button again to quit an blue
LED in ictor turns on.
7) Press button “ ” again to shut own an blue LED in ictor off.
8) USB isk function: When the machine is in stan by “ON” status,
plug in USB cable an then start by button “ ” on controller, it
will go to USB isk mo e.
9) Web camera function: please install the river in CD-ROM
before first using. When it is in stan by “ON” status, press
button “ ” to start, then connect it to computer by USB cable,
then it will work as a web camera.
10) Charging: push the toggle switch to “OFF” terminal, plug into
USB charger, then re LED in ictor turns on, when the battery
is full, the LED will turn off. PC USB port also can charge the
battery.
11) Reset: when the machine is no response by invali operation

or other unknown reasons, please push the toggle switch to
“OFF” terminal, an then turn back to “ON” terminal, it will reset.
12) Low-power warning: when the battery is low power, the blue
LED in ictor will flicker continuously that means the battery
shoul be charge . When the battery is out of power, it can
store the ata automatically.
13) If the program is lost, please install the river in CD-ROM
firstly. After click the STK02NU program up ate tool, an then
click “up ate” to upgra e. Select 0x35 after DRAM Timing an①
select 8M after DRAM Size, press button ②“OK” to burn new
program in a couple of minutes.
2 Store files and play
After finishing vi eo recor ing, put the toggle switch to ON
terminal, an plug USB cable to computer. Start the machine by
pressing button “ ” on controller, it will work as USB isk. Copy
the files insi e to computer isk an play. Also you can take the
TF memory car out, an rea the ata by car rea er. Suggest
using “Me ia Player / KM Player” to play.

VI echnical Data of Digital Video
Pixels 5M pix CMOS
Resolution 1280x960
Vi eo format AVI
FPS 30fps
View 140°
Sensing istance 6m
Min illumination 1Lux
Battery capacity 2400mAh
Vi eo recor time >12h
Remote istance 8m
Voice recor area 40m2
Power consumption 130ma/3.7V