Wolf Gourmet WGBL120SR User manual

USE & CARE GUIDE
GUIDE D’UTILISATION ET D’ENTRETIEN
GUIA DE USOS Y CUIDADOS

2 |
WOLF GOURMET BLENDER
Welcome
Thank you for your purchase of this Wolf Gourmet product.
We look forward to being part of your kitchen for years to
come. Wolf is a third-generation family-owned company that
has a personal stake in the preparation of your food. With
family ownership comes a great attention to detail and an
uncompromised dedication to creating exceptional products.
Wolf built its business and reputation on helping home cooks
achieve the best results possible. With Wolf Gourmet’s
precise control, the dish you envision will be the dish you
serve.

wolfgourmet.com | 3
Contents
4Safety Precautions
6Wolf Gourmet Blender
Parts and Features
8Preparing the Blender
10 Using Program Settings
12 Using Manual Mode
15 Care Recommendations
16 Troubleshooting
17 Wolf Gourmet Warranty
Customer Care
As a Wolf Gourmet owner, you can count
on our support. Our customer care center
is here to help you should the need arise.
Simply call 844-885-8770 to speak with one
of our product experts. In Mexico, please
contact the customer service center at
800 400 4372. We are condent this guide
will answer your questions about the
features, operation, and maintenance of your
Wolf Gourmet product. If you have additional
questions, please contact us by phone or
visit us online at wolfgourmet.com.
Register Your Product
We strongly encourage you to register your
Wolf Gourmet appliance. It’s important to us
that you get the most out of your products.
By registering you will:
• Become a Wolf Gourmet culinary insider.
• Have ongoing support from Wolf Gourmet.
• Activate your warranty and record your
purchase.
• Be alerted to any service updates.
• Receive occasional emails to help you
maintain and enjoy your appliances.
To register, visit wolfgourmet.com/registration
or call 844-885-8770. In Mexico, please visit
wolfgourmet.com.mx or call 800 400 4372.

4 |
SAFETY PRECAUTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of re, electric shock, and/or injury to persons,
including the following:
• Read all instructions.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they are closely supervised and
instructed concerning use of the appliance by a person responsible for their safety.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach
of children.
• Close supervision is necessary when any appliance is used near children. Children should
be supervised to ensure that they do not play with the appliance.
• To protect against risk of electrical shock, do not put cord, plug, base, or motor in water or
other liquid.
• Turn the appliance OFF( ), then unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning. To unplug, grasp the plug and pull from the outlet.
Never pull from the power cord.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged in any manner. Supply cord replacement
and repairs must be conducted by the manufacturer, its service agent, or similarly qualied
persons in order to avoid a hazard. Call the provided customer service number for
information on examination, repair, or adjustment.
• The use of attachments, including canning jars, not recommended or sold by the appliance
manufacturer may cause a risk of injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces, including stove.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Keep hands and utensils, other than the tamper provided, out of container while blending
to reduce the risk of severe injury to persons or damage to the blender. The cover must
remain in place when using the tamper through the cover opening. A scraper may be used
but must be used only when the blender is not running.
• Blades are sharp; handle carefully—especially when assembling, disassembling, or
cleaning inside blender jar.
• Do not use a broken, chipped, or cracked blender jar.
• Do not use broken, cracked, or loose cutting blade assembly.
• Always operate blender with lid and emulsion cap assembly in place. Remove emulsion
cap assembly only for adding ingredients or to insert the tamper.
• When blending hot liquids, remove ller-cap of two-piece lid or open vent opening of lid
with mess-free spout, and close any lid openings along the edge intended for pouring. Hot
liquids may push lid off jar during blending. To prevent possible burns: Do not ll blender jar
beyond the 6-cup (1420-ml) level. With the protection of an oven mitt or thick towel, place
one hand on top of lid. Keep exposed skin away from lid. Start blending at lowest speed.
• Ensure cutter assembly is tight and secure to jar. Injury can result if moving blades
accidentally become exposed.
• If the jar should twist or rotate when the motor is switched ON, switch OFF ( ) immediately
and tighten jar in collar or on blender base.
• Do not leave blender unattended while it is operating.

wolfgourmet.com | 5
SAFETY PRECAUTIONS
This appliance is intended for household use only. Use for food or liquids only.
WARNING
Electrical Shock Hazard: This appliance is provided with
a grounded (3-prong) plug to reduce the risk of electric shock. The plug fits only
one way into a grounded outlet. Do not defeat the safety purpose of the plug by
modifying the plug in any way or by using an adapter. If the plug does not fit into the
outlet, have an electrician replace the outlet.
The length of the cord used on this appliance was selected to reduce the hazards
of becoming tangled in or tripping over a longer cord. If a longer cord is necessary,
an approved extension cord may be used. The electrical rating of the extension cord
must be equal to or greater than the rating of the appliance. The extension cord
must be a grounding-type, 3-wire cord. Care must be taken to arrange the extension
cord so that it will not drape over the countertop or tabletop where it can be pulled
on by children or accidentally tripped over.
If the cutting blade assembly locks and will not move, it will damage the motor.
Do not use. Call the customer care center for information.
Do not place blender jar in the freezer filled with food or liquid. This can result in
damage to the cutting blade assembly, jar, blender, and possibly result in personal
injury.
NOTE: This machine is equipped with motor overload protection. If the
motor stops during operation due to overheating, unplug and allow it to cool
down for approximately 15 minutes. Plug machine back in to resume normal
operation.
The wattage/ampere rating of the blender is determined by an Underwriters
Laboratory test and is based on available cutting blade assembly, jar
combinations, and attachments that may not be provided with your unit, but
are available as replacement parts. This is a measure of input wattage/amperes
after 30 seconds of operation. The blender as provided may draw significantly
less power.
Peak power is the measure of the motor wattage during the first seconds
of operation. This is when a blender requires the most power to crush ice,
frozen fruit, etc. This is a better measure of what a blender motor can
consume when power is needed most.
Wattage/Peak Power Information
Other Consumer Safety Information
IMPORTANT SAFEGUARDS continued
• Check that the appliance is OFF ( ) before plugging cord into wall outlet. To disconnect,
turn the control to OFF ( ); then remove plug from wall outlet. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
• Do not use appliance for other than intended purpose.
• Be careful if hot liquid is poured into the blender container as it can be ejected out of the
appliance due to a sudden steaming.
• CAUTION! In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off by the utility.
SAVE THESE INSTRUCTIONS

6 |
1b
4
11
12
3
PARTS AND FEATURES
1a Filler Cap
1b Emulsion Cup
2Lid
3Tamper
4Blender Jar
5Cutting Blade Assembly
6Jar Pad
7Control Buttons
8Control Panel Display
9Selector Bezel
10 Variable Speed Control Knob
11 Base
12 Rating Plate Location
Wolf Gourmet
Blender
1a
2
5
6
WOLF GOURMET BLENDER PARTS AND FEATURES
8
7
9
10

wolfgourmet.com | 7
Parts and Features
1. Emulsion Cap Assembly: The two-piece cap has a filler cap inside an emulsion cup.
The filler cap has markings for easy measuring, while the emulsion cup is used to
make fine dressings and marinades. When both parts are removed, ingredients can
be added or the tamper may be inserted into the lid.
2. Lid: The lid fits securely into blender jar and can be easily removed by lifting the logo
tab. To keep the spout of the pitcher mess-free, place logo tab above the handle of
the pitcher.
3. Tamper: The tamper mixes thick or frozen mixtures that cannot be processed with
regular blending. It prevents air pockets from forming and is a handy tool when
making nut butters.
4. Blender Jar: The durable jar is clearly marked with ounces, cups, and milliliters. Your
jar was made of a special co-polyester material selected for its weight, durability, and
glass-like clarity. For care and cleaning of the jar, see page 15.
5. Cutting Blade Assembly: The cutting blade assembly is permanently installed in the
blender jar.
6. Jar Pad: Simply lift to remove the rubber pad for easy cleaning.
7. Control Buttons: Two buttons are located on top of
the base. Use START/STOP with any setting. Use
PULSE with any variable speed when using the
MANUAL mode.
8. Control Panel Display: When using program settings,
the display will indicate the setting and a countdown
timer. In MANUAL mode, the display will show
variable speeds from LO to HI and a count-up timer.
9. Selector Bezel: Rotate selector bezel to desired
blending mode: SMOOTHIE, MANUAL, ICE CRUSH,
PUREE, and SOUP.
2
3
4
5
6
7
8

8 |
10. Variable Speed Control Knob: When using MANUAL
mode, select any speed for blending and pulsing by
rotating the control knob from LO to HI. Available in
black, red, or brushed.
11. Base: Contains the motor. DO NOT IMMERSE BASE IN WATER.
12. Rating Plate Location: Model number and rating information can be found under the
base.
Sleep Mode: After 10 minutes of inactivity, the display
panel will go into Sleep Mode and have a blank screen
with a logo. To end Sleep Mode, press any button or turn
the selector bezel to OFF.
Automatic Overload Protection: The Wolf Gourmet
Blender is equipped with motor overload protection. If the
motor stops during operation due to overheating, unplug
and allow it to cool down for about 15 minutes. Plug
blender back in to resume normal operation.
2
3
4
5
6
7
8
Preparing the Blender
After unpacking the blender, wash
everything except blender base in hot,
soapy water. Dry thoroughly. Wipe blender
base with a damp cloth or sponge. DO
NOT IMMERSE BASE IN WATER. Care
should be taken when handling cutting
blade assembly since it is very sharp. Refer
to care recommendations on page 15.
IMPORTANT: Blender jar and cutting
blade assembly are subject to wear
during normal use. Always inspect jar for
nicks, chips, or cracks. Always inspect
cutting blade assembly for broken,
cracked, or loose blades. If jar or cutting
blade assembly is damaged, do not use.
Call our customer care center to obtain
replacement parts.
Selecting Blender Settings
Select from four program settings or use
the MANUAL mode for precise speed
control.
WARNING
Burn Hazard
Metal parts under blending jar get hot after
use. Do not touch.
PARTS AND FEATURES

wolfgourmet.com | 9
Using Program Settings
Programs are optimized for recipe categories and vary in blending speed and duration.
The blender automatically stops at the end of the program.
2
3
4
5
6
7
8
1. Turn the Selector Bezel from OFF to one of the
following programs:
a. SMOOTHIE – blends frozen or fresh smoothies.
Blender pulses five times at the beginning to
chop ice or frozen ingredients and then ramps
up to run on HI for a total of 55 seconds. See
SMOOTHIE tips on page 14.
b. ICE CRUSH – breaks ice into pieces small
enough for slushies or fine cocktails. Blender
continuously pulses from LO to MEDIUM for 1
minute. See ICE CRUSH tips page on 14.
c. PUREE – gives a smooth, creamy consistency
to pureed fruit or vegetables and a fine texture
when grinding grain and making powdered
sugar. Blender slowly ramps up from LO to HI,
running for 1 minute, 15 seconds. See PUREE
tips page on 14.
d. SOUP – purees and heats ingredients to just
under the boiling point. Do not blend more than
6 cups (1420 ml) on this program. When making
soups, start with cold or room-temperature
ingredients. Emulsion Cap Assembly can be kept
in lid. Blender runs for 6 minutes, 45 seconds.
See SOUP tips page on 14.
LO
2
LO
2
LO
2

10 |
2. Display panel LCD will show program selected and
the duration time of the program.
5. Display panel LCD will show a down arrow and begin
to count down. Blender will automatically stop at the
end of the program and LCD display will show END.
3. Fill by opening lid. Add ingredients and replace lid.
4. Press START/STOP.
6. To stop the blender at any time during the program, press START/STOP. If
reactivated by pressing START/STOP again, the program will start at the beginning.
7. Rotate Selector Bezel to OFF to turn off power.
WARNING
Burn Hazard
When blending hot liquids, avoid contact with spray or steam by:
• Always removing Emulsion Cap Assembly.
• Always beginning blending on the lowest speed.
• Never exceeding the 6-cup (1420-ml) level.
• Always keeping hands and other exposed skin away from the lid opening.
USING PROGRAM SETTINGS

wolfgourmet.com | 11
Using Manual Mode
MANUAL mode allows precise control of blending speeds.
1. Turn Selector Bezel from OFF to MANUAL.
2. Rotate Variable Speed Control Knob counterclockwise to LO. Always start at LO
and adjust to a higher speed after starting blender.
4. Fill by opening lid. Add ingredients and replace lid.
5. Press START/STOP.
7. Increase speed by slowly rotating the Variable Speed Control Knob clockwise. The
increase in speed will show on the LCD display as an increasing bar toward HI.
8. Press START/STOP at any time to stop blender.
9. Rotate Variable Speed Control Knob back to LO.
10. Rotate Selector Bezel to OFF to turn off power.
3. Display panel LCD will show MANUAL, LO speed,
and 0:00 time.
6. Display panel LCD will show an up arrow and begin
to count up the time.

12 |
Pulse
1. Turn Selector Bezel from OFF to MANUAL.
2. Rotate Variable Speed Control Knob counterclockwise to LO. Always start at LO
and adjust to a higher speed after starting blender.
3. Display panel LCD will show MANUAL, LO speed, and 0:00 time.
4. Fill by opening lid. Add ingredients and replace lid.
5. Press PULSE button.
6. Display panel LCD will show an up arrow and begin to count up the time.
7. Increase PULSE speed by rotating Variable Speed Control Knob clockwise. The
increase in speed will show on the LCD display as an increasing bar toward HI.
8. Hold PULSE button for the desired time.
9. Rotate Variable Speed Control Knob back to LO.
10. Rotate Selector Bezel to OFF to turn off power.
USING MANUAL MODE
PULSE can be used with the MANUAL setting to control
chopping action or to encourage mixing of ingredients.

wolfgourmet.com | 13
GENERAL
• For best performance, the minimum amount of liquid needed per recipe is one cup
(8 ounces/237 ml).
• For thick smoothies or purees that are not blending well, incorporating a small amount
of additional liquid may be all that is necessary to improve the results. Start by adding
a ¼ cup (59 ml).
• To add foods when blender is operating, remove emulsion cap assembly and add
ingredients through the opening.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender when in operation or at any time.
• Cutting large whole fruits and vegetables may allow them to blend more quickly.
• Do not fill blender jar past highest graduation marking.
• Blender jar material is susceptible to impacts with hard ingredients, such as nuts,
seeds, grains, and kernels, which may result in minor impact marks or the appearance
of being cloudy. These are aesthetic issues and will not affect future blending
performance.
• If blending action stops during blending or ingredients stick to sides of the jar, insert
tamper to help move the mixture around or add more liquid to the blender jar.
USING THE TAMPER:
• When blending very thick or frozen mixtures, such as peanut butter or sorbet, air
pockets may occasionally form due to the high speed of the blades, which can
cause ingredients to stop blending. This is called cavitation. If cavitation occurs, use
the tamper to push the ingredients towards the blade. The tamper is designed to
fit perfectly inside the opening in the jar’s lid so it may be used while the blender is
running. It will not touch the blade. ONLY use the tamper with the jar lid in place.
1. Remove emulsion cap assembly. Insert tamper through hole in blender lid.
2. Blender jar should not be more than two-thirds full when the tamper is used during
blending.
3. Do not use tamper with hot liquids.
4. If needed to help ingredients circulate, point the tamper toward the sides or
corners of the container. Do not try to force the tamper deeper into the container
and closer to the blades.
PREVENTING OVERLOADING:
• Do not process recipes at lower speeds or higher speeds than recommended.
• Do not process recipes longer than recommended.
BLENDER TIPS

14 |
BLENDER TIPS
SMOOTHIE:
• The SMOOTHIE setting was designed for pourable beverages made with liquid, fruits
or vegetables, and a frozen component (ice or frozen fruit). For best results when using
the SMOOTHIE setting, add liquids first, then ingredients softer to harder. Add frozen
ingredients and ice last. To achieve a pourable consistency and to keep the blender
running smoothly, the following guidelines should be used:
1. Ideally there should be 1½ cups (355 ml) liquid for every 2 cups (473 ml) of ice or frozen
fruit. A higher ratio of frozen ingredients may cause cavitation. Use the tamper to push
ingredients toward the blade during the cycle if needed.
2. For best results, use at least 1 cup (237 ml) of liquid for every 1 cup (237 ml) of leafy
greens. If using a larger quantity of leafy greens, after blending on the SMOOTHIE
setting, you may want to blend 20 seconds longer on HI to achieve an extra silky
smoothie or use the MANUAL setting to blend to your desired consistency.
Juicy fresh fruits such as grapes, oranges, strawberries, pineapple, and melons are
considered as a liquid for purposes of achieving the proper ratio of liquids to frozen
ingredients or leafy greens.
ICE CRUSH:
• Different types of ice may require different methods of crushing depending on the
quantity of ice.
• To crush crescent-shaped ice produced by most home ice makers and the cube ice
made in trays, make sure the blender jar is dry, add no more than 5 cups (1.2 L) of ice, and
run the ICE CRUSH cycle. This will produce a dry, uffy ice perfect for snow cones.
• Cubes produced by undercounter or commercial ice machines and bagged ice is wetter
and requires a different method. To crush wet ice, ll the blender jar with the desired
amount of ice. It can be lled to the 8-cup capacity line. Next add water to the blender jar
until the ice oats above the blades. Run the ICE CRUSH cycle. Drain off excess water.
This will produce a wet ice that is perfect for frozen drinks. Wet ice may also be crushed
without using water if the blender is lled with no more than 4 cups (946 ml) of ice.
PUREE:
• The PUREE setting is best used to achieve a smooth consistency when blending cooked
or soft fruits and vegetables, for making creamy dips such as hummus, and for grinding
grains.
• Blend fresh whole juices (without frozen ingredients) on the PUREE setting for best
results.
SOUP:
• Do not blend more than 6 cups (1420 ml) on this program.
• When making soups, start with cold or room-temperature ingredients.
• Emulsion cap assembly can be kept in lid.

wolfgourmet.com | 15
CLEANING
Base, Control
Panel, Cord
Wipe with a damp cloth or sponge. Do not use abrasive or corrosive cleaners.
Blender Jar HAND WASH ONLY. Alternative is to ll jar halfway with water and add 2–3
drops of dish soap. Blend for 30 seconds. Rinse and dry thoroughly.
For a more thorough cleaning, sprinkle ¼ cup (59 ml) baking soda in blender.
Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling
subsides, add 2 cups (473 ml) water and blend on the SOUP cycle. Wash any
remaining residue with dish soap and water. Rinse and dry thoroughly.
Blender Lid,
Emulsion Cap
Assembly,
Tamper, Jar Pad
These items can be washed in a dishwasher. DO NOT use the “SANI” setting
when washing in the dishwasher. “SANI” cycle temperatures could damage
product. Parts may also be washed with hot, soapy water. Care should be
taken when handling the cutting blade assembly since it is very sharp. Rinse
and dry thoroughly.
Care Recommendations
BEFORE CLEANING
1. Unplug cord.
2. Lift blender jar assembly off the base.
3. Remove emulsion cap assembly and lid.
WARNING
Electrical Shock Hazard
Disconnect power before cleaning. Do not
immerse cord, plug, base, or motor in water
or other liquid.
Recommendations:
• To maintain the aesthetic
characteristics of the blender jar,
carefully wash and dry immediately
after every use.
• Use of a soft brush, like a baby
bottle brush, and dish detergent are
recommended for removal of tough
oils or stubborn ingredients from the
jar and may be helpful in cleaning
beneath the jar blades.
• Use a dish towel or soft cloth for
drying.
• If the jar does not appear clean after
the rst wash, repeat.
• Avoid the use of abrasive or rough
cleaners, scouring pads, brushes,
and steel wool since they will cause
scratches during the cleaning process.
• Soaking your jar in vinegar or a 10%
bleach solution (up to 8 hrs) may be
helpful in removing some stains or
signs of cloudiness.

16 |
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service
marks of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens,
The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. All other
trademarks or registered trademarks are property of their respective owners in the United States and other countries.
Troubleshooting
"Err" shows in display.
• Turn unit to OFF before unplugging. Unplug and allow unit to cool 15 to 45 minutes.
• If unit will not operate after 45 minutes of cooling, call our customer care center.
Blender fails to start.
• Make sure selector bezel is not in the OFF position.
• Ensure the unit is securely plugged into an outlet of proper voltage and frequency.
• Check to see if fuse for outlet has blown or if circuit breaker has tripped.
Unit does not respond to button commands.
• Turn power off and back on using selector bezel to reset controls.
• If unit does not respond, call our customer care center.
Blender smells like it is burning.
• Turn off blender and allow unit to cool.
• Although motors are tested during the manufacturing process, heavy use may cause
curing of motor windings. The smell may quickly dissipate after a few heavy uses.
• If smell continues after additional heavy uses, call our customer care center.
There is grease around the bottom of the blender jar or on the counter top.
• Monitor the problem and source. This may indicate an issue with the jar bearings.
• Call our customer care center if the condition persists.
Blender jar is cloudy or stained. How can I clean it?
• Some cloudiness may be natural after use. Minerals from fruits, produce, and leafy
greens, in addition to the oils of various nut butters, can sometimes cause a lm on
the blender jar.
• Sprinkle ¼ cup (59 ml) baking soda in blender. Add 1 cup (237 ml) white vinegar.
Mixture will bubble. When bubbling subsides, add 2 cups (473 ml) water and blend
on the SOUP cycle. Wash any remaining residue with dish soap and water. Rinse and
dry thoroughly.

wolfgourmet.com | 17
Wolf Gourmet Residential Limited Warranty
FOR RESIDENTIAL USE
APPLIANCES, COOKWARE AND CUTLERY PURCHASED AND USED
OUTSIDE OF MEXICO
To obtain a copy of the written warranty for your Wolf Gourmet product, please visit
our website at www.wolfgourmet.com/warranty or email us at
[e-mail].

18 |
MÉLANGEUR WOLF GOURMET
Bienvenue
Nous souhaitons vous remercier d’avoir fait l’achat de ce
produit Wolf Gourmet. Nous serions ravis de faire partie
de votre cuisine pour les années à venir. Wolf appartient
à la troisième génération d’une entreprise familiale qui a
un intérêt particulier dans la préparation de vos aliments.
Puisqu’il s’agit d’une question de famille, Wolf porte une
attention spéciale aux détails et se dévoue à la création
de produits exceptionnels sans aucun compromis. Nous
avons bâti notre entreprise et notre réputation sur le soutien
que nous apportons aux cuisiniers à la maison, an qu’ils
obtiennent les meilleurs résultats possible. Grâce au contrôle
précis qu’offre Wolf Gourmet, le plat que vous projetez est le
plat que vous servirez.

wolfgourmet.com | 19
Table des matières
20 Précautions de sécurité
22 Pièces et fonctions du mélangeur
Wolf Gourmet
24 Préparation du mélangeur
25 Utilisation des réglages de
programme
27 Utilisation du mode manuel
30 Recommandations d’entretien
31 Dépannage
34 Garantie de Wolf Gourmet
Service à la clientèle
En tant que propriétaire d’un appareil Wolf
Gourmet, vous pouvez compter sur notre
appui. Notre centre de service à la clientèle
est à votre disposition si vous avez besoin
d’aide. Si le besion se fait sentir, vous n’avez
qu’à composer le 844-885-8770 pour
parler a un de nos experts. Nous sommes
certains que le présent manuel répondra
aux interrogations que vous pourriez avoir
concernant les fonctions, l’utilisation et
l’entretien de votre produit Wolf Gourmet.
Toutefois, si vous avez d’autres questions,
veuillez nous contacter par téléphone ou
nous visiter en ligne sur wolfgourmet.com.
Enregistrer le produit
Nous vous encourageons fortement à
enregistrer votre appareil Wolf Gourmet. Il est
important pour nous que vous puissiez tirer le
meilleur de vos produits. En vous enregistrant,
vous pourrez :
• Devenir un initié culinaire Wolf Gourmet.
• Obtenir un soutien continu de Wolf Gourmet.
• Activer votre garantie et enregistrer votre
achat.
• Être alerté en cas de mises à jour du service.
• Recevoir des courriels occasionnels pour
vous aider à prendre soin et à proter de vos
appareils.
Pour vous en registrer, visitez
wolfgourmet.com/registration ou appelez au
844-885-8770. Au Mexique, veuillez visiter le
site wolfgourmet.com.mx ou appelez au
800 400 4372.

20 |
PRÉCAUTIONS DE SÉCURITÉ
PRÉCAUTIONS IMPORTANTES
Pour utiliser un appareil électroménager, vous devez toujours prendre des mesures
élémentaires de sécurité pour réduire le risque d’incendie, d’électrocution et/ou de
blessure corporelle, en particulier les mesures suivantes :
• Lire toutes les instructions.
• Cet appareil n’est pas destiné à être utilisé par des personnes dont les capacités
physiques, sensorielles ou mentales sont réduites, ou manquant d’expérience et de
connaissance, sauf si elles sont étroitement surveillées et instruites sur l’utilisation de
l’appareil par une personne responsable de leur sécurité.
• Cet appareil ne devrait pas être utilisé par des enfants. Garder l’appareil et son cordon hors
de la portée des enfants.
• Une surveillance étroite est requise pour tout appareil utilisé près des enfants. Surveiller
que les enfants ne jouent pas avec l’appareil.Pour éviter les risques d’électrocution, ne pas
immerger le cordon, la che, la base ou le moteur dans l’eau ou tout autre liquide.
• Fermer l’appareil ( ), puis le débrancher de la prise lorsqu’il n’est pas utilisé, avant
d’assembler ou de désassembler des pièces ou avant de le nettoyer. Pour le débrancher,
tenir la che et la retirer de la prise. Ne jamais tirer sur le cordon.
• Éviter de toucher les parties mobiles.
• Ne pas faire fonctionner un appareil électroménager avec un cordon ou une che
endommagée, ou lorsque l’appareil ne fonctionne pas bien ou a été échappé ou
endommagé d’une manière quelconque. Le remplacement et la réparation du cordon
d’alimentation doivent être faits par le fabricant, son agent de service ou toute personne
qualiée de façon à éviter tout danger. Appeler le numéro de service à la clientèle fourni
pour des renseignements concernant l’examen, la réparation ou l’ajustement.
• L’utilisation d’accessoires non recommandés par le fabricant ou vendus par le fabricant de
l’appareil, incluant les boîtes de conserve, peut provoquer des blessures.
• Ne pas utiliser à l’extérieur.
• Ne pas laisser pendre le cordon de la table ou du comptoir et éviter tout contact entre le
cordon et les surfaces chaudes incluant la cuisinière.
• Ne placer pas sur ou à proximité d’un brûleur électrique ou à gaz chaud ou dans un four
chaud.
• Veuillez garder vos mains et les ustensiles hors du contenant lors du malaxage, à
l'exception du pilon fourni, an de réduire le risque de blessures corporelles ou de bris
au robot culinaire. Le couvercle doit rester en place lors de l'utilisation du pilon à travers
l'ouverture du couvercle. Une spatule peut être utilisée, mais seulement lorsque le robot
culinaire n'est pas en fonctionnement.
• Les lames sont tranchantes ; manipuler avec soin lors de l’assemblage et du démontage ou
lors du nettoyage de l’intérieur du récipient du mélangeur.
• Ne pas utiliser un récipient de mélangeur brisé, craqué ou ssuré.
• Ne pas utiliser des lames brisées, ssurées ou lâches.
• Utilisez toujours le mélangeur alors que le couvercle et l’assemblage du bouchon pour
émulsions sont en place. Retirez l’assemblage du bouchon pour émulsions uniquement
pour ajouter des ingrédients ou pour insérer le presse-aliments.
• Lors du mélange de liquides très chauds, retirer le bouchon de remplissage du couvercle
en deux parties ou ouvrir l’évent du couvercle avec le bec verseur antigoutte et fermer
tous les becs verseurs le long du bord. Les liquides chauds peuvent pousser sur le
couvercle pendant le mélange. Pour prévenir les brûlures : Ne pas remplir au-delà de la
marque 6 tasses (1420-ml) du récipient. À l’aide d’un gant de cuisinier ou d’une serviette
épaisse, placer une main sur le dessus du couvercle. Garder la peau exposée éloignée du
couvercle. Commencer à mélanger en utilisant la vitesse minimale.Assurez-vous que les
lames sont bien serrées et xées au récipient. Des risques de blessures peuvent survenir si