Wolf Hill Garden Center Classic Rose II GMRT0038D Firmware update

#GMRT0038D, #GMRT0038C, #GMRT0038B, #GCRT0038D, #GCRT0038C, #GCRT0038B, #PRCT0018
HARDWARE PACKAGE
8 ¼" x 2" Allen Head Bolts
8 ¼" Flange Nuts
2 Umbrella Knobs
16 3" Screws
1Allen Wrench
PACKAGE CONTENTS
1Top
2 Bases
1 Cross Support
2 Footrests (Bar and Counter Height Only)
4 Braces
1 Hardware Package
TOOLS NEEDED:
Hammer
7/" Wrench
Cordless Drill/Screwdriver
Allen Wrench (Included)
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Umbrella
Holder
Cross Support
Footrest
Base
Upright
Top Boards
Apron
Assembly Directions for
Conversation and 38" Round Table
Garden Classic
Rose II Table
Round Conversation Table
NOTE: Bar
and Counter
Height Only
All manuals and user guides at all-guides.com
all-guides.com

STEP #1 - Fasten one Base to the Aluminum
Frame of the Top using 4- ¼" x 2"
Allen Head Bolts and 4- ¼" Flange
Nuts.
STEP #2 - First attach the Cross Support to the
Base using 3" screws. Second attach
the two Footrests to the Base using 3"
screws (counter and bar height only).
STEP #3 - First fasten the Second Base to the
Aluminum Frame of the Top using
4- ¼" x 2" Allen Head Bolts and 4-
¼" Flange Nuts. Second fasten the
Footrests and Cross Support to the
Base using 3" Screws.
Umbrella
Knobs
3" Screws
Cross
Support
Footrest
¼" x 2" Allen
Head Bolts
3" Screws
¼" x 2" Allen
Head Bolts
All manuals and user guides at all-guides.com