WolfPack HDTV-B29VW User manual

Version 2.2
Warning
Do not expose this device to Rain, Moisture, and
Dripping
Only use accessories specified by the manufacture
Unplug this device during Lightning Storms
Product specifications may be subject to technical
upgrades without further notice
WolfPack™ 4K 60 2x9 Video Wall Processor
Model No. HDTV-B29VW
WolfPack™ 4K 60 2x9 Video Wall Processor

2
Contents
FEATURES 3
CONNECTORS AND CONTROLS 3
Front 3
Rear 3
4
4
Video Wall Context Menu 8
Bezel Setting 9
Bezel Compensation 9
Layout Save/Load 9
SPECIFICATIONS 10
General 10
Video and Audio 10
Power Supply 10
Environmental and Physical 11
Package Contents 11
Safety Instructions 11
WolfPack™ 4K 60 2x9 Video Wall Processor
USING THE HDTVHDPMXB29VM
HDTVHDPMXB29VM PC TOOL

3
HDMI scaling out for video wall processing. The Toslink jack terminal provides analogue LR audio
and digital S/Pdif audio output. 5 way phoenix jackets provide balanced LR audio output.
connection
Features
•Support Bezel Compensation with two modes
•Support 180º rotation
•Support PIP on video wall
•Support HDMI 2.0,HDCP2.2
•Support 2x HDMI loop out
•Support multi-resolution up to 3840x2160@60Hz video output for video wall
•Support RS232 and TCP/IP control
•Support CEC control with displayer by PC Tool or commands
Connectors and Controls
Front
Name
Description
PWR-LED
Lit when the unit is powered
HD A-LED
Lit when HDMI A input is connected
HD B-LED
Lit when HDMI B input is connected
LP A-LED
Lit when Loop out A is connected
LP B-LED
Lit when Loop out B connected
HD 1…9-LED
Lit when the corresponding HDMI out is connected
Rear
HDTVHDPMXB29VM is a HDMI 2.0 Video Wall controller with 2 HDMI input, 2 HDMI loop out and 9
HDTVHDPMXB29VM support RS232 bypass feature for several units daisy chain or cascade
WolfPack™ 4K 60 2x9 Video Wall Processor

4
Name
Description
LAN
TCP/IP Control, Baud Rate: 57600
RS232-CTL
External RS232 control, Baud Rate: 57600
Data Bits: 8Parity: None Stop Bits: 1
RS232
To bypass RS232-CTL commands to next unit
UPDATE
Firmware upgrade
Balanced Audio out
5 way phoenix Jacket, 20Hz – 20kHz, 1.5Vrms max
Mini Toslink
•L+R Audio Output
3.5mm Stereo Jack. 20Hz – 20kHz, 1.5Vrms max
•Optical S/pdif Audio Output
HD A
HDMI A input
HD B
HDMI B input
LOOP OUT A
Bypass HDMI A signal to downstream
LOOP OUT B/MAIN
Bypass HDMI B or A signal to downstream, can be configured by
RS232 command
HD 1…HD 9
HDMI scaling output for video wall to display
output video wall display devices to HD 1…HD9 HDMI output connector. With PC Tool or RS232
commands to control the unit for different wall display
Switch tab on the PC tool
1. PC tool connection with UART or Network
2. Select input source for each scaling output port
3. All Set function, select HD A or B to all the scaling output
4. Select input source for B/MAIN output port
5. Select audio source for balanced audio output and Mini Toslink output
6. EDID configure
7. Reset
Connect the desired video source to HDTVHDPMXB29VM input HD A or HD B connector and the desired
WolfPack™ 4K 60 2x9 Video Wall Processor
Using the HDTVHDPMXB29VM
HDTVHDPMXB29VM PC tool

5
EDID management
User can read each scaling output port downstream EDID and save as a BIN file.
User can open an existing EDID file and write to the HDMI A and B input port as Manual EDID.
User can select predefined EDID and write to HDMI A and B input ports
Predefined EDID option like below:
4K60-2.0CH
1920x1200-2.0CH
4K60-5.1CH
1680x1050-2.0CH
4K30-2.0CH
1600x1200-2.0CH
4K30-5.1CH
1440x900-2.0CH
1080P-2.0CH
1400x1050-2.0CH
1080P-5.1CH
1360x768-2.0CH
720P-2.0CH
1280x1024-2.0CH
1024x768-2.0CH
Manual
WolfPack™ 4K 60 2x9 Video Wall Processor

6
Signal Setting tab on the PC tool
User can read each input port resolution and set each scaling output resolution here
Available output resolutions:
Number
Output Resolution Setting
Number
Output Resolution Setting
1
3840x2160p 60Hz
9
1440x1050 60Hz
2
3840x2160p 50Hz
10
1366x768 60Hz
3
3840x2160p 30Hz
11
1360x768 60Hz
4
3840x2160p 25Hz
12
1280x1024 60Hz
5
1920x1200 60Hz
13
1280x768 60Hz
6
1920x1080p 60Hz
14
1280x720p 60Hz
7
1920x1080p 50Hz
15
1280x720p 50Hz
8
1600x1200 60Hz
16
1024x768 60Hz
Please note, 3840x2160 25/30Hz can only be used for standalone display, not for video wall
PQ tab on the PC tool
Suggest always use the default setting 50/50/50/50
CEC tab on the PC tool
WolfPack™ 4K 60 2x9 Video Wall Processor

7
Video Wall tab on the PC tool
The Video Wall tab is used to configure a group of outputs to function as a video wall.
1. Use the Video Wall Setting controls to change how the displays are arranged on the
Video Wall tab:
a. Adjust the Rows and Columns sliders to change the displayed screen
arrangement to permit proper Drag-and-Select of the desired screens for the
video wall.
b. Change the Available slider to set how many outputs will be used for the Video
Wall.
c. Click the Set button to change the Screen configuration on the Video Wall tab.
2. Use the left mouse button to drag-select the screens that will be set for video wall
mode. The selected screens will be shown as bright blue.
3. Use the right mouse button to open a menu.
4. Select Screen Stitching from the menu to program the video wall mode. The selected
screens will now be shown as bright green.
5. To change the displayed image: either use the methods detailed in the section Error!
Reference source not found. starting on page 10, or right-click to open the pop-up
menu and select the desired input from the Input Select menu option.
WolfPack™ 4K 60 2x9 Video Wall Processor

8
Repeating steps 2 to 5 above
with a different set of outputs
allows the creation of a second
video wall. However, changing
the Rows,Columns and
Available sliders will
automatically delete the
current video wall set up when
the Set button is clicked. The
following example shows a
more unusual video wall set-up
of two video walls with 1x3 and
2x2 configurations:
Video Wall Context
Menu
Right clicking on any of the screen icons will display the following context menu:
Screen Stitching
This option connects the selected screens into a video wall configuration.
Cancel Stitching
Return the Video Wall configuration to normal outputs.
Screen x – Cancel Stitching
Removes the single screen x from the video wall to allow the displaying
another full frame image within the video wall configuration, as shown in
this example:
Input Select
Use the sub-menu to select the input to display on the video wall or the
secondary input image shown in the above example.
WolfPack™ 4K 60 2x9 Video Wall Processor

9
Output Select
This option is only available for any screen that is not assigned to a video
wall mode.
Output Type
This option is only available for any screen that is not assigned to a video
wall mode. It allows setting of the selected screen output mode as
described in the Error! Reference source not found. section on page
14.
Output Format
This option is only available for any screen that is not assigned to a video
wall mode. It allows setting of the output resolution for the selected
screen output.
Mirror
Four sub options : OFF ( default ), H ( Horizontal ), V ( Vertical ) , H+V
When select H+V, you can make 180º rotation with the selected screen
Test Pattern
When enable this feature, the output will display Color Bar pattern
Bezel Setting
The Bezel Setting section allows the entry of values to compensate for the display bezel thickness.
These values may be entered either as pixels (Type A) or as millmetre (Type B).
Type A Bezel Settings
The image size will be adjusted to allow for the number of pixels entered in each of the entry
boxes. Click the Set button view the effect of the new values.
Type B Bezel Settings
The image size will be adjusted to allow for the Inner and Outer display dimensions as entered
in each of the entry boxes. Click the Set button view the effect of the new values.
Bezel Compensation
The following images demonstrate the effect of not having bezel compensation and what a
correctly configured bezel compensation settings should produce:
No Bezel Compensation
Correct Bezel Compensation
Layout Save/Load
The Save Scene/Layout and Load Scene/Layout buttons allow a video wall configuration to be
saved or recalled at any time. Up to 10 configurations, each with their own name can be saved
or recalled. When saving, each Scene can optionally be given a name to identify that video wall
WolfPack™ 4K 60 2x9 Video Wall Processor

10
scene setup.
Specifications
General
HDMI Version
HDMI 2.0,18Gbps
HDCP Compliance
HDCP 2.2 and HDCP 1.4
RS232
57600 baud, 8 data bits, 1 stop bit, no parity
Video and Audio
Input Video
Formats
Supported
1024x768@60, 1280x800@60,
1280x1024@60, 1280x960@60,
1360x768@60, 1366x768@60,
1440x900@60, 1400x1050@60,
1600x900@60, 1600x1200@60,
1680x1050@60, 1920x1200@60,
480p@60, 576p@50,
720p@50, 720p@60
1080i@50, 1080i@60,
1080p@24, 1080p@25
1080p@30, 1080p@50
1080p@60, 3840x2160@24,
3840x2160@25, 3840x2160@30,
3840x2160@50, 3840x2160@60,
4096x2160@24, 4096x2160@30,
4096x2160@50, 4096x2160@60
Audio Format
Supported
2.0 channel ,5.1 channel
LPCM,Dolby,AC3,DTS
Power Supply
Power Consumption
70W max.
Supply Voltage
110-220 VAC
WolfPack™ 4K 60 2x9 Video Wall Processor