Wonde Proud WT100CR User manual

WT100CR operation manual
1, Touch remote controller battery install
Use AA size battery x 2
Note: DO NOT touch the “Touch Area” while placing the battery
2. Functions of Touch PAD
a. move coursor
touch and move touch-pad by finger
b. simulate mouse left button
a short touch (click)on touch pad
c. simulate mouse right button
a long touch(no moving approx. 1 second) on touch pad
3. Auto search RF receiver dongle
press and simultaneously until LED off then release keys ,
when you see blue LEDs keep ON, it means that the WT100CR is looking
for the RF dongle; when you see blue LEDs blinking quickly, it means that
both remote controller and RF dongle had been successfully connected!
Note : if you replace WT100CR battery, you have to reconnect RF dongle.

4. Key operation
mouse Left button
play/Pause in Windows Media Player
fast forward in Windows Media Player
fast backward in Windows Media Player
increase volume
mouse right button
Backspace
task window switching
Press , PC pop all active task iterm, or select
task, press switch to your task window

mute
decrease volume
arrow up
arrow right
arrow down
arrow left
ENTER
full screen in Windows Media Player
5. RF Receive Dongle install
Plugin RF receive dongle to your PC/NoteBook USB port, PC/NoteBook
find a new device and install driver automatically.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.