WoodFast HB350A User manual
Instruction
Manual
IMPORTANT
For your safety, read
instructions carefully
before assembling or
using this product.
Save this manual for
future reference. Original Instruction
V. 1-201809
/RIGINAL¬)NSTRUCTION¬-ANUAL
6ERSION¬
&EBRUARY¬
7OODWORKING¬-ACHINES¬¬!CCESSORIES
4ELEPHONE¬¬¬
&AX¬¬¬
3TARTRITE
5NIT¬"¬!DELPHI¬7AY
3TAVELEY¬¬3¬,3
%MAIL¬SALES RECORDPOWERCOUK
WWWSTARTRITECOUK
%¬%¬¬%¬¬¬
)NDUSTRIAL¬¬
"ANDSAW
)-0/24!.4
&OR¬YOUR¬SAFETY¬READ¬INSTRUCTIONS¬CAREFULLY¬BEFORE¬
ASSEMBLING¬OR¬USING¬THIS¬PRODUCT¬3AVE¬THIS¬
MANUAL¬FOR¬FUTURE¬REFERENCE
(%!,4(¬!.$¬3!&%49¬'5)$%,).%3
!LWAYS¬FOLLOW¬THE¬INSTRUCTIONS¬PROVIDED¬WITH¬THE¬MANUAL¬!LWAYS¬WEAR¬SAFETY¬GLASSES¬WHEN¬USING¬WOODWORKING¬
EQUIPMENT¬!LWAYS¬DISCONNECT¬THE¬POWER¬BEFORE¬ADJUSTING¬ANY¬EQUIPMENT¬&AILURE¬TO¬OBSERVE¬PROPER¬SAFETY¬
PROCEDURES¬AND¬GUIDELINES¬CAN¬RESULT¬IN¬SERIOUS¬INJURY
7!2.).'¬$O¬NOT¬ALLOW¬FAMILIARITY¬GAINED¬FROM¬FREQUENT¬USE¬OF¬YOUR¬MACHINE¬AND¬ACCESSORIES¬TO¬BECOME¬
COMMONPLACE¬!LWAYS¬REMEMBER¬THAT¬A¬CARELESS¬FRACTION¬OF¬A¬SECOND¬IS¬SUFlCIENT¬TO¬INmICT¬SEVERE¬INJURY !LWAYS¬WEAR¬SAFETY¬GLASSES¬WHEN¬
USING¬WOODWORKING¬EQUIPMENT
!LWAYS¬READ¬THE¬INSTRUCTIONS¬
PROVIDED¬BEFORE¬USING¬
WOODWORKING¬EQUIPMENT
SAWMILL
HB350A
-2-
INDEX
1 GENERAL INFORMATION
1.1 FOREWORD
1.2 MACHINE IDENTIFICATION
1.3 CUSTOMER SERVICE RECOMMENDATIONS
2 SAFETY PRECAUTIONS
2.1 SAFETY REGULATIONS
2.2 RESIDUAL RISKS
2.3 SAFETY AND INFORMATION SIGNALS
3 SPECIFICATIONS
3.1 MAIN COMPONENTS
3.2 TECHNICAL SPECIFICATION
3.3 ELECTRICAL CONNECTION
3.4 NOISE LEVEL
3.5 DUST EXTRACTION
4 INSTALLATION AND OPERATION
4.1 INSTALLATION ZONE CHARACTERISTICS
4.2 INSTALL OF LOOSE PARTS-INTRODUCTION
5 MAINTENANCE
5.1 CHANGING AND SETTING THE BLADE
5.2 BLADE GUIDING
5.3 FIX FLANGE
6 TROUBLE SHOOTING
7 DIAGRAMS AND COMPONENTS
-3-
1. GENERAL INFORMATION
1.1 FOREWORD
Some information and illustrations in this manual may differ from the machine in your hand, since all the configurations
inherent in the machine complete with all the optional are described and illustrated. Therefore, refer only to that
information strictly related with the machine configuration you have purchased.
With this manual we would like to provide the necessary information for maintenance and proper use of the machine.
The distribution network is at your service for any technical problem, spare parts or any new requirement you many
have for the development of your activity.
This manual must be read and understood before operating the machine. This will provide a better
working knowledge of the machine, for increased safety and to obtain the best results.
To better stress the importance of some basic passages, they have been marked by some preceding.
symbols:
1.2 MACHINE IDENTIFICATION
There is a identification plate fixed to the machine, containing the manufacturer’s data, year of construction, serial
number and technical specifications.
1.3 CUSTOMER SERVICE RECOMMENDATIONS
Apply the machine to skilled and authorized technical staff to carry out any operation dealing with parts disassembly.
Keep to the instructions contained in this manual for the correct use of the machine.
Only skilled and authorized staff shall use and service the machine after reading this manual.
Respect the accident prevention regulations and the general safety and industrial medicine rules.
Indicates imminent risks which may cause serious injury to the operator or other persons. Be
careful and scrupulously follow the instructions.
A statement advising of the need to take care lest serious consequences result in harm to
material items such as the asset or the product.
CAUTION
WARNING
CAUTION
2. SAFETY PRECAUTIONS
2.1 SAFETY REGULATIONS
The manufacturer disclaims all responsibilities for damages to persons or things, which might be caused by any failure
to comply with the safety regulations.
-It is prohibited to use the machine when under the influence of alcohol, drugs or medication.
-The operators must carefully read the manual paying particular attention to the warning and safety notes. Furthermore,
they must be informed on the dangers associated with use of the machine and the precautions to be taken, and must be
instructed to periodically inspect the guards and safety devices.
-Before carrying out adjustment, repair or cleaning work, disconnect the machine from the electric power by setting the
main switch to stop.
-After an initial bedding-in period or many hours of operation, the driving belts may slacken; this causes an increase in
the tool stopping time (the stopping time must be less than 10 seconds). Immediately tighten them.
WARNING Read carefully the operation and maintenance manual before starting, using, servicing and
carrying out any other operation on the machine.
-4-
-The working area around the machine must be kept always clean and clear, in order to have an immediate and easy
access to the switchboard.
-Never insert materials which are different from those which are prescribed for the machine utilization.
-Never process pieces which may be too small or too wide to the machine capacity.
-Do not process wood which has evident defects(cracks, knots, metal parts, etc)
-Keep hands clear from the tool; feed the piece with the aid of a pusher.
-Keep the tools tidy and far away from those not authorized persons.
-Use qualified tools, never use cracked, buckled or wrong polished tools; never use irregular, dull tools; never use
distorted blade.
-Never use the tools beyond the speed limit recommended by the producer.
-Always wear gauntlets when handling the tools.
-Mount the tools in the right machining direction.
-Never start the machine before having correctly installed all protections. Without protections or damage caused by
person should install and complete in time, or forbid to start machine. Never install protections.
-Connect the dust suction hoods to and adequate suction system; suction must always be activated when the machine
is switched on.
-Never open the door or other protections when the machine or the system is operating.
-Before start machine, check if the blade is properly assembled. After starting machine, check if turning direction of
bladeis right, start to work after revolving speed is stable.
-Many unpleasant experiences have shown that anybody may wear objects which could cause serious accidents.
Therefore, before starting working, take any bracelet, watch or ring off.
-Button the working garment sleeve well around the wrists.
-Take any garment off which, by hanging out, may get tangled in the MOVING UNITS.
-Always wear strong working footwear, as prescribed by the accident-prevention regulations o all countries.
-Use protection glasses. Use appropriate hearing protection systems (headsets,earplugs,etc.) and dust protection
masks.
-Never let unauthorized people repair, service or operate the machine.
-Any transport, assembly and dismantling is to be made only by trained staff, who shall have specific skill for the
specified operation.
-The operator must never leave the machine unattended during operation.
-During any working cycle break, switch the machine off.
-In case of long working cycle breaks, disconnect the general power supply.
-When breakdown happen, please switch the machine off and pull up power line, seek help from professional person. If
wood material block machine, please backward material.
-Clean offcut, saw dust timely during operation.
-Keep ground around machine clear, no stack flammable and combustible materials.
-5-
2.2 RESIDUAL RISKS
- contact with tool
- contact with moving parts (belts, pulleys, etc..)
- recoil of the piece or part of it
- accidents due to wood splinters or fragments
- tool insert ejection
- electrocution from contact with live parts
- danger due to incorrect tool installation
- inverse tool rotation due to incorrect electrical connection
- danger due to dust inhalation in case of working without vacuum cleaner.
2.3 SAFETY AND INFORMATION SIGNALS
This signals may be applied on the machine; in some cases they indicate possible danger conditions, in others they
serve as indication.
Always take the utmost care.
SAFETY SIGNALS:
Wear hearing protection systems.
Risk of eye injury. Wear eye protection.
Danger of electric shock. Do not access the area when the machine is powered.
Carefully read and understand the manual before using the machine.
INFORMATION SIGNALS:
Indicate the technical characteristics, direction of rotation and inclination, block and release, etc.
Carefully following the directions to simply the use and adjustment of the machine.
The signals are graphically described and do not require further explanation.
WARNING Accident caused by unqualified electrical element which connect machine and unconventional
installation, manufacturer assumes no responsibility.
WARNING Accident cause by change machine function or change spare part arbitrarily, manufacturer
assumes no responsibility.
Despite observance of all the safety regulations, and use according to the rules described in this
manual, residual risks may still be present, among which the most recurring are:
WARNING
Accident caused by operation under missing part or damage condition,manufacturer assumes no
responsibility
WARNING
Table of contents
Other WoodFast Saw manuals
