Woodline Picollo User manual

1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
12
14
15
14
M6 x 20
05 July 2021
*NOTE:
You may have purchased one of two bases for mounting the umbrella. The components comprising the base
mount system are in separate boxes from the umbrella. Locate your base mount system boxes, and assemble
the base system prior to removing the umbrella from the protective plastic bag.
For alternative base options please view www.woodlineshade.com
ASSEMBLY INSTRUCTIONS
PACKED
CKED
PA
PA
CKED
PA
CKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED
PACKED BY: DATE:
CHECKED BY: DATE:
BOX 2 - CANOPY
CANOPY
BOX 1 - STRUCTURE
1 X PICOLLO SPIGOT

O
3
4
5
6
7
8
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
º
8
BEFORE INSERTING THE M8 STUD YOU MUST
FIRST REMOVE THE RED PLASTIC INSERT FROM THE HOLE
(THIS HELD THE STRUCTURE TOGETHER IN TRANSIT
AND CAN BE DISCARDED ONCE REMOVED)
M8
M8 M8
ARROW STICKER
ON LOWER END
THIS
SIDE
DOWN
THIS
SIDE
DOWN
THIS
SIDE
DOWN
THIS
SIDE
DOWN
THIS
SIDE
DOWN
THIS
SIDE
DOWN
THE INSERT (8) IS USED TO JOIN THE VERTICAL (7) AND HORIZONTAL
ARMS (1). PLEASE NOTE THE DIFFERENCE IN THE DISTANCES BETWEEN
HOLES (A) AND (B) - THE ARROW STICKER ON SIDE (A) SHOULD BE
POINTING DOWNWARDS WHEN THE INSERT IS FITTED.
05 July 2021

9
10
2
3
1
2
3
ATTACHING THE CANOPY TO THE UMBRELLA STRUCTURE
THIS
SIDE
DOWN
THIS
SIDE
DOWN
05 July 2021

The whole parasol rotates 360º
on the rotation pointand fixes
into position with an indexring.
•
Rotation
05 July 2021

www.woodlineshade.com Toll Free 1 – 800 – 260 – 0617
1 In order to avoid the canopy
fabric from being jammed
between the frame
components, it is important to
pull the fabric out from the
umbrella structure by putting a
finger under the edge of the
canopy and pulling the fabric
outwards. Do this for all the
panels and fold the panels over
each other like you would
with a hand-held umbrella.
2 Tie the canopy strap tightly
otherwise the canopy can move
in wind conditions and get
damaged through rubbing.
1 Lay out the cover bag flat on a table with the
zip totally opened.
2 Insert the supplied cover bag stick
into the bag all the way to the top, lift up the
cover bag vertically and place it gently up
and over the top of your closed umbrella.
3 Lower it into position and zip it closed
completely. The cover bag stick can be
placed into its pouch for safe keeping.
Strap
HOW TO FIT YOUR COVER BAG CORRECTLY
CANOPY FOLDING INSTRUCTIONS
/6
4 For extra protection always
ensure your umbrella is in a dry
condition before closing and
applying the cover bag.
COVER
BAG
STICK
POUCH
COVER
BAG
STICK
VELCRO
STRAP
COVER BAG STICK
HOOK ROTATED
UPWARD TO HOOK
ZIP RING FOR
PULLING DOWN
TO CLOSE BAG
COVER BAG STICK
HOOK ROTATED
DOWNWARD TO HOOK
ZIP RING FOR
PULLING UPWARD
TO OPEN BAG
3 Place cover bag over umbrella
for extra protection to prolong
the life and preserve the color
of the canopy.
05 July 2021

Canopy size:
Round – sizeis measured from tiptotip through the center
Square– sizeis measured from tip totip on one side
Back of pulley to front of canopy
Head clearance from arm tip
Head clearance below hub
Overall height
Maximum distance between ends
*Rotation point to farthest arm tip
Minimum clearance from rotation point
Ground clearance when closed
Rotation point, 360 degrees
model shape A (size) B C D E F G* H I
* This distance is measured from the pivot point to the farthest distance from this point on the umbrella. radius
of the circle created as the umbrella rotates 360 degrees.
All vertical measurements are taken from the ground level, including paver base.
All imperial measurements have been converted from metric and are rounded to the nearest inch. For exact dimensions refer to
metric measurements.
6/7
05 July 2021

UV RESISTANT WATER/STAIN RESISTANT BREATHABLE MOLD RESISTANT EASY CARE PROTECTS FROM UV
05 July 2021