Woodstock SHOP FOX W1710 User manual

Model W1710
***IMPORTANT UPDATE***
Applies to Models Mfd. Since 1/14
and Owner's Manual Revised 9/05
Phone #: [phone] • Tech Support: [e-mail] • Web: www.shopfox.biz
COPYRIGHT © MAY, 2014 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC., #16564TS, Printed in Taiwan
We made the following changes to the Model W1710 since the original manual was printed:
• Obtained CSA certification meeting CSA C22.2 #105-1953 and UL 987-7th standards.
• Added and changed components inside the electrical box.
• Updated warning instructions.
• Changed machine wiring.
• Replaced oscillation diaphragm (P/N 485) with an air cylinder (P/N 485V2).
• Updated air flow parts diagram and list.
Note: At the top of each page is a note that indicates which page it replaces in the original manual. New
parts are designated with a “V2”.
Aside from the information contained in this update, all other content in the owner's manual is
applicable and MUST be read and understood for your own safety. IMPORTANT: Keep this update with
the owner's manual for future reference. If you have any further questions, contact our Technical
Support.
READ THIS FIRST

-2-
Model W1710 (Mfd. Since 1/14)
Changed Electrical Cabinet Components (Changes to Page 44–45)
522V2
550 534V2
531V2 530 533V2
580
581
589
582
REF PART # DESCRIPTION REF PART # DESCRIPTION
520V2 X1710520V2 INCOMING POWER TERMINAL BAR 3P V2.01.14 550 X1710550 OL RELAY SCHN LT47 5-60A
522V2 X1710522V2 TERMINAL BAR 24P V2.01.14 580 X1710580 OL RELAY SCHN LR3D12 5.5-8A
530 X1710530 CURRENT SENSOR NITECH C1731 581 X1710581 CONTACTOR SCHN LC1D09 220V
531V2 X1710531V2 CONTACTOR SCHN LC1D50A 220V V2.01.14 582 X1710582 CONTACTOR SCHN LC1D09 220V W/LOCK
533V2 X1710533V2 FUSE HOUSING SCHN DF101 V2.01.14 589 X1710589 CONTACTOR SCHN LC1D09 220V
534V2 X1710534V2 FUSE 4A 10 X 38MM V2.01.14
520V2

-3-
Model W1710 (Mfd. Since 1/14)
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the equipment or a situation that may cause
damage to the machinery.
NOTICE
SAFETY
OWNER’S MANUAL.
Read and understand this
owner’s manual BEFORE using machine.
TRAINED OPERATORS ONLY.
Untrained operators
have a higher risk of being hurt or killed. Only
allow trained/supervised people to use this
machine. When machine is not being used,
disconnect power, remove switch keys, or
lock-out machine to prevent unauthorized
use—especially around children. Make
workshop kid proof!
DANGEROUS ENVIRONMENTS.
Do not use
machinery in areas that are wet, cluttered,
or have poor lighting. Operating machinery
in these areas greatly increases the risk of
accidents and injury.
MENTAL ALERTNESS REQUIRED.
Full mental
alertness is required for safe operation of
machinery. Never operate under the influence
of drugs or alcohol, when tired, or when
distracted.
ELECTRICAL EQUIPMENT INJURY RISKS. You can
be shocked, burned, or killed by touching live
electrical components or improperly grounded
machinery. To reduce this risk, only allow an
electrician or qualified service personnel to
do electrical installation or repair work, and
always disconnect power before accessing or
exposing electrical equipment.
DISCONNECT POWER FIRST. Always disconnect
machine from power supply BEFORE making
adjustments, changing tooling, or servicing
machine. This eliminates the risk of injury
from unintended startup or contact with live
electrical components.
EYE PROTECTION. Always wear ANSI-approved
safety glasses or a face shield when operating
or observing machinery to reduce the risk of
eye injury or blindness from flying particles.
Everyday eyeglasses are not approved safety
glasses.
Standard Machinery Safety Instructions
For Your Own Safety,
Read Manual Before Operating Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words intended to convey the level of importance of the
safety messages. The progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident prevention mea-
sures—this responsibility is ultimately up to the operator!
SAFETY
Standard Machinery Safety Instructions
Replaces Page 4

-4-
Model W1710 (Mfd. Since 1/14)
WEARING PROPER APPAREL. Do not wear
clothing, apparel,or jewelry that can become
entangled in moving parts. Always tie back
or cover long hair. Wear non-slip footwear to
avoid accidental slips, which could cause loss
of workpiece control.
HAZARDOUS
DUST. Dust created while using
machinery may cause cancer, birth defects,
or long-term respiratory damage. Be aware of
dust hazards associated with each workpiece
material, and always wear a NIOSH-approved
respirator to reduce your risk.
HEARING PROTECTION.
Always wear hearing
protection when operating or observing
loud machinery. Extended exposure to this
noise without hearing protection can cause
permanent hearing loss.
REMOVE ADJUSTING TOOLS.
Tools left on
machinery can become dangerous projectiles
upon startup. Never leave chuck keys,
wrenches, or any other tools on machine.
Always verify removal before starting!
INTENDED USAGE.
Only use machine for its
intended purpose—never make modifications
without prior approval from Woodstock
International. Modifying machine or using
it differently than intended will void the
warranty and may result in malfunction or
mechanical failure that leadsto serious
personal injury or death!
AWKWARD POSITIONS.
Keep proper footing and
balance at all times when operating machine.
Do not overreach! Avoid awkward hand
positions that make workpiece control difficult
or increase the risk of accidental injury.
CHILDREN & BYSTANDERS.
Keep children and
bystanders at a safe distance from the work
area. Stop using machine if they become a
distraction.
GUARDS & COVERS.
Guards and covers reduce
accidental contact with moving parts or flying
debris—make sure they are properly installed,
undamaged, and working correctly.
FORCING MACHINERY. Do not force machine. It
will do the job safer and better at the rate for
which it was designed.
NEVER STAND ON MACHINE. Serious injury may
occur if machine is tipped or if the cutting
tool is unintentionally contacted.
STABLE MACHINE. Unexpected movement during
operation greatly increases risk of injury or
loss of control. Before starting, verify machine
is stable and mobile base (if used) is locked.
USE RECOMMENDED ACCESSORIES. Consult
this owner’s manual or the manufacturer for
recommended accessories. Using improper
accessories will increase risk of serious injury.
UNATTENDED OPERATION. To reduce the risk
of accidental injury, turn machine OFF and
ensure all moving parts completely stop
before walking away. Never leave machine
running while unattended.
MAINTAIN WITH CARE. Follow all maintenance
instructions and lubrication schedules to
keep machine in good working condition. A
machine that is improperly maintained could
malfunction, leading to serious personal injury
or death.
CHECK DAMAGED PARTS. Regularly inspect
machine for any condition that may affect
safe operation. Immediately repair or replace
damaged or mis-adjusted parts before
operating machine.
MAINTAIN POWER CORDS. When disconnecting
cord-connected machines from power, grab
and pull the plug—NOT the cord. Pulling the
cord may damage the wires inside, resulting
in a short. Do not handle cord/plug with wet
hands. Avoid cord damage by keeping it away
from heated surfaces, high traffic areas, harsh
chemicals, and wet/damp locations.
EXPERIENCING DIFFICULTIES. If at any time
you experience difficulties performing the
intended operation, stop using the machine!
Contact Technical Support at [phone].
Replaces Page 5

-5-
Model W1710 (Mfd. Since 1/14)
Additional Safety for Wide Belt Sanders
MINIMUM STOCK DIMENSION. To avoid kickback,
never sand workpieces below minimum
specifications listed in Data Sheet.
ADJUSTMENTS/MAINTENANCE. Make sure
machine is turned OFF, disconnected from
power and air, and all moving parts are
completely stopped before doing adjustmentsor
maintenance.
SANDING DUST. Sanding creates large amounts
of dust and flying chips that can lead to eye
injury or respiratory illness. Reduce risk of these
hazards by wearing approved eye and respiratory
protection when using sander.
DUST COLLECTION. Never operate without
adequate dust collection system in place and
running. Proper dust collection reduces dust in
work area, which decreases risk of long-term
respiratory damage, but it is not a substitute for
using a respirator.
Serious injury or death can occur from hands getting trapped between workpiece and conveyor
table, getting entangled in rotating parts inside machine, or lacerated by sanding drum.
Workpieces thrown by sander can strike nearby operators. Long-term respiratory damage can
occur from using sander without proper use of a respirator and an adequate dust collection
system. To minimize risk of getting hurt or killed, anyone operating machine MUST completely
heed hazards and warnings below.
FEEDING WORKPIECE. DO NOT place fingers
under bottom of workpiece while feeding it into
sander. Fingers can become pinched between
workpiece and conveyor.
ENTANGLEMENT HAZARDS. DO NOT wear loose
clothing, gloves, or jewelry, and tie back long
hair. Never reach inside operating machine or try
clearing jammed workpiece. Keep all guards in
place and secure, and all doors closed.
SANDING DRUM CONTACT. Rotating sandpaper
can remove a large amount of flesh in a few
seconds. Keep hands away from rotating sanding
drum(s) during operation. Never touch moving
sandpaper on purpose.
WORKPIECE KICKBACK. A workpiece can be
ejected out the front of sander at high rate of
speed, and hit operator or bystanders. Never
stand in-line with workpiece, never feed more
than one workpiece at a time, and always adjust
pressure rollers below sanding roller.
Replaces Page 6

-6-
Model W1710 (Mfd. Since 1/14)
Electrical Schematic
Replaces Page 31

-7-
Model W1710 (Mfd. Since 1/14)
Control Panel Wiring
Replaces Page 32

-8-
Model W1710 (Mfd. Since 1/14)
Electrical Cabinet
Replaces Page 33

-9-
Model W1710 (Mfd. Since 1/14) Changes to Pages 42–43
New Upper Roller Air Cylinder
475
494
497
485V2
495
496
Previous Version Diaphragm (P/N 485)
New Version Air Cylinder (P/N 485V2)
REF PART # DESCRIPTION REF PART # DESCRIPTION
475 X1710475 UNIVERSAL JOINT FORK 495 X1710495 LOCK WASHER 5/16
485V2 X1710485V2 OSCILLATION AIR CYLINDER V2.01.14 496 X1710496 HEX NUT 5/16-18
494 X1710494 CONNECTOR 1/4N X 1/8T X 90 DEG 497 X1710497 HEX BOLT 5/16-18 X 1-1/2

-10-
Model W1710 (Mfd. Since 1/14)
Updated Air Flow Diagram
Changes to Pages 46–47
REF PART # DESCRIPTION REF PART # DESCRIPTION
639 X1710639 FILTER CUP 1/4" 658 X1710658 BUFFER 1/8" (BRONZE)
640 X1710640 PRESSURE REGULATOR 1/4" 660 X1710660 CONNECTOR 5/16N X 1/8T X 90DEG
641 X1710641 CONNECTOR 1/4T X 5/16N 661 X1710661 FLEXIBLE HOSE 8MM
642 X1710642 FLEXIBLE HOSE 8MM 662 X1710662 FLEXIBLE HOSE 8MM
643 X1710643 AIR VALVE 1/4" 663 X1710663 FLEXIBLE HOSE 6MM
644 X1710644 ELBOW 664 X1710664 FLEXIBLE HOSE 6MM
645 X1710645 PHLP HD SCR 10-24 X 1/2 665 X1710665 FLEXIBLE HOSE 6MM
647 X1710647 SOLENOID VALVE 666 X1710666 FLEXIBLE HOSE 6MM
649 X1710649 CONNECTOR 1/4N X 1/4T 667 X1710667 FLEXIBLE HOSE 6MM
650 X1710650 MULTIPLE HOLE CONNECTOR 668 X1710668 FLEXIBLE HOSE 6MM
651 X1710651 CONNECTOR 5/16N X 1/4T 669 X1710669 FLEXIBLE HOSE 6MM
652 X1710652 ELBOW 1/4T X 1/8T X 90DEG (BRONZE) 670 X1710670 FLEXIBLE HOSE 6MM
653 X1710653 THROTTLE VALVE 1/8" 674 X1710674 CONNECTOR 1/4N X 1/8T X 90DEG
654 X1710654 CONNECTOR 1/4N X 3/8T 675 X1710675 CONNECTOR 1/4N X 1/8T X 90DEG
655 X1710655 AIR SWITCH 1/8" 677 X1710677 CONNECTOR 1/4N
656 X1710656 CONNECTOR 1/4N X 1/8T 680 X1710680 CONNECTOR 1/4N X 1/8T
657 X1710657 CONNECTOR 1/4N X 1/8T X 90DEG 690 X1710690 PRESSURE GAUGE
640
641
642
643
644
645
647
649
649
650
651
652
653
654
655
656
656
657
658
660
661
662
663
664
665
666
667
668
669
670
674 675
677
690
680
639

Improvements to this machine were made since the manual was originally printed, and this update cov-
ers those changes. Keep this update with your owner's manual in case you ever need to refer to it. If
you have questions, contact Tech Support at [phone] or by email at [e-mail].
New Electronic Overload Relay
We added a new electronic overload relay for the sanding belt motor inside the electrical box assembly,
as shown in Figure 1. New wiring diagrams are shown on the following pages.
COPYRIGHT © NOVEMBER, 2007 BY WOODSTOCK INTERNATIONAL, INC. REVISED DECEMBER, 2009 (BL)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in Taiwan#10140BL
The following part has been added:
REF PART#DESCRIPTION
550 X1689624 OLRELAYTELETESYS-LT475~60A
,,'
Refer to the W1710 manual for the rest of the
parts.
Figure 1. W1710 wiring box components.
New
Overload
Relay
Model W1710
24" Wide Belt Sander
Manual Update
(For Models Manufactured Since 11/07)
Phone #: [phone] • Online Tech Support: [e-mail] • Web: www.shopfox.biz

-2-
W1710 Manual Update (Mfg. After 11/07)
W1710 Wiring Diagram (11/2007)
/
C( C)
(+ )) 8)
K( K) K*
)+-
E:
EF
(* )( 8(
EF E:
*
K(
K) K*
)
+-
(+ )) 8)
K( K) K*
)+-
E:
EF
(+ )) 8)
K(
K) K*
)
+-
E:
EF
(* )( 8(
CC) C*
(*,
EF E: (* )( 8(
CC) C*
(*,
EF E: (* )( 8(
CC) C*
(*,
EF E:
(+ )) 8)
K( K) K*
)+-
E:
EF
*
)
)
)
/
I
J
IJ
0
LM
IJ
I\[
N_`k\
CK+.-'
K89C<LG&;FNE
*
8( 8)
0.EF0/ 0,E:0-
FB FC
)
0
0
(
C(
*
C)
,
C*
)(E:
(*EF
(+EF
))E:
J8E;@E>9<CK:FEK8:KFI
)
K(
+
K)
-
K*
('
:FEM<PFI9<CK
*
C)
(
C
,
C*
((
EF E:
0. 0/ 0, 0-
I
J
:FEK8:KFI
II
J
((
)
)( )'
)
('
L(
M(
L)
M)
L* (. (0
L)
M)
L*
(0
()
(*
)
<D>9I8B<
-
,
=LJ<=LJ<
*)
(+
(,
I J <
L( M( L)
M)
L* (- (. (/ (0 (* () (( (' 0 / - , , * * ) (+ (,
JFC<EF;M8CM<
:LII<EK;<M@:<
(*
()
((
J
I
J8E;@E>9<CKFCI<C8P

-3-
W1710 Manual Update (Mfg. After 11/07)
W1710 Electrical Schematic (12/2009)
MO T OR
M 1
RU
S V
3A
WL
1 2 S OL 1 3
F
R
2 0
2 1
R
F
1 7
1 9
1 6
1 8
L S
L S
L S 1
L S 2
L S 3
L S 4
OL 1
M1
GL
S T OP S T A R T
M1
9
7
6
A
5
P O WE R S O U R C E
B R A K E
T A B L E L I F T I N G
& L O WE R I N G
MO T OR
RU
SV
U
V
32
S A N D I N G B E L T
C O N V E Y O R B E L T
E me r g e n c y S t o p
S A N D I N G B E L T
C O N V E Y O R B E L T
R S
T A B L E L I F T I N G
& L O WE R I N G
E
A
AM
1 4
1 5
U 1
V 1
OL 3
M 3
M3
1 1
A
R U V S
a b
E me r g e n c y B r a k e
a b
a b
P C R 1
1 0
M3
U 2
V 2
OL 1
F
S
S
R
F u s e
4 A 2
S
2
S T OP S T A R T
OL 3
GL
P C
P C R 2
MO T OR
U 3
U 2
V 2
U 3
U 2
V 2
U 3
R
S
R
R
A
E M E R G E N C Y
B R A K E
8
L T 4 7
L T 4 7

=^\]FjVa^inBVX]^cZhVcYIddah
LddYhidX`>ciZgcVi^dcVa!>cX#XVgg^Zhi]djhVcYhd[egdYjXihYZh^\cZY
idbZZii]ZcZZYhd[idYVnhlddYldg`ZghVcYbZiValdg`Zgh#
6h`ndjgYZVaZgVWdjii]ZhZ[^cZegdYjXih/

>CHIGJ8I>DCB6CJ6A
BD9:AL&,&%
')L>9:7:AIH6C9:G
E]dcZ/&"(+%",()"()-'Dc"A^cZIZX]c^XVaHjeedgi/iZX]"hjeedgi5h]de[dm#W^o
8DENG><=IH:EI:B7:G!'%%($JE96I:9H:EI:B7:G!'%%*7NLDD9HID8@>CI:GC6I>DC6A!>C8#
L6GC>C</CDEDGI>DCD;I=>HB6CJ6AB6N7:G:EGD9J8:9>C6CNH=6E:DG;DGBL>I=DJI
I=:LG>II:C6EEGDK6AD;LDD9HID8@>CI:GC6I>DC6A!>C8# Eg^ciZY^cIV^lVc
+.'%8G

N8IE@E>
Jfd\ [ljk Zi\Xk\[ Yp gfn\i jXe[`e^# jXn`e^#
^i`e[`e^#[i`cc`e^#Xe[fk_\iZfejkilZk`feXZk`m`k`\j
ZfekX`ejZ_\d`ZXcjbefnekfk_\JkXk\f]:Xc`]fie`X
kfZXlj\ZXeZ\i#Y`ik_[\]\Zkjfifk_\ii\gif[lZk`m\
_Xid%Jfd\\oXdgc\jf]k_\j\Z_\d`ZXcjXi\1
  C\X[]ifdc\X[$YXj\[gX`ekj%
  :ipjkXcc`e\j`c`ZX]ifdYi`Zbj#Z\d\ek#Xe[
  fk_\idXjfeipgif[lZkj%
  8ij\e`ZXe[Z_ifd`ld]ifdZ_\d`ZXccp
  ki\Xk\[cldY\i%
Pfli i`jb ]ifd k_\j\ \ogfjli\j mXi`\j# [\g\e[`e^
fe_fnf]k\epfl[fk_`jkpg\f]nfib%Kfi\[lZ\
pfli \ogfjli\ kf k_\j\ Z_\d`ZXcj1 nfib `e X
n\cc m\ek`cXk\[ Xi\X# Xe[ nfib n`k_ Xggifm\[
jX]\kp \hl`gd\ek# jlZ_ Xj k_fj\ i\jg`iXkfij k_Xk
Xi\ jg\Z`Xccp [\j`^e\[ kf ]`ck\i flk d`ZifjZfg`Z
gXik`Zc\j%

8JJ<D9CP FG<I8K@FEJ D8@EK<E8E:< G8IKJ
8;ALJKD<EKJJ8=<KP@EKIF;L:K@FE
:fek\ekj
@ekif[lZk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)
8YflkPfliE\nJXe[\i%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% )
Nff[jkfZbJ\im`Z\Xe[Jlggfik%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% )
NXiiXekp%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% *
Jg\Z`]`ZXk`fej%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% *
J8=<KP=@IJK%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+
JkXe[Xi[JX]\kp@ejkilZk`fej%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +
8[[`k`feXcJX]\kp@ejkilZk`fej]fiJXe[\ij%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -
8mf`[`e^Gfk\ek`Xc@eali`\j%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% .
<c\Zki`ZXcI\hl`i\d\ekj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%/
))'MFg\iXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% /
<ok\ej`fe:fi[j%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% /
>ifle[`e^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% /
8JJ<D9CP%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%0
LegXZb`e^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 0
9fo:fek\ekj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 0
J_fgGi\gXiXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%('
:c\Xe`e^DXZ_`e\%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%('
8`i?fj\@ejkXccXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%((
JXe[`e^9\ck@ejkXccXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%((
J_`gg`e^Gcl^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%()
;ljk:fcc\Zk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%()
8;ALJKD<EKJ%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (*
>\e\iXc@e]fidXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(*
A\k8`i=cfn%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(*
9\ckKiXZb`e^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(+
9\ckKiXZb`e^JX]\kpJn`kZ_%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(-
9\ckK\ej`feJX]\kpJn`kZ_%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(-
Gi\jjli\Ifcc\ij%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(.
M$9\ckK\ej`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(/
FG<I8K@FEJ%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% )(
>\e\iXcFg\iXk`feXe[K\jkIle%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%))
J\kk`e^=\\[Jg\\[%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)*
Lj`e^k_\8dg;iXnD\k\i%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)*
<d\i^\eZpJkfg%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)+
B\pgX[Xe[;`jgcXp%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)+
:Xc`YiXk`e^k_\KXYc\%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)+
9Xj`ZJXe[`e^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%),
D8@EK<E8E:<%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% )-
>\e\iXc%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)-
ClYi`ZXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)-
JXe[`e^9\ckj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%).
J\im`Z`e^J\gXiXkfij%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%).
J\im`Z`e^9iXb\%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)/
:_Xe^`e^M$9\ckj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%)0
KiflYc\j_ffk`e^%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*'
N(.('N`i`e^;`X^iXd%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*(
N(.(':fekifcGXe\cN`i`e^:fee\Zk`fej%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*)
N(.('Jn`kZ_9foN`i`e^:fee\Zk`fej%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%**
JX]\kpCXY\cGcXZ\d\ek%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+/
8ZZ\jjfi`\j%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%,'
NXiiXekpI\^`jkiXk`fe%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%,(

@EKIF;L:K@FE
$)$
@EKIF;L:K@FE
8YflkPfliE\nJXe[\i
Pflie\nE:AB8AJJXe[\i_XjY\\ejg\Z`Xccp[\j`^e\[kfgifm`[\dXepp\Xijf]kiflYc\$]i\\
j\im`Z\%:cfj\Xkk\ek`fekf[\kX`c#il^^\[cpYl`ckgXikjXe[Xi`^`[hlXc`kpZfekifcgif^iXdXjjli\jX]\
Xe[i\c`XYc\fg\iXk`fe%
K_\Df[\cN(.('_XjXeld\i`ZZfekifcgX[Xe[[`^`kXci\X[flkk_Xkgifm`[\k_\lck`dXk\`egi\Z`j`fe
Xe[\Xj\$f]$lj\i\hl`i\[Ypgif]\jj`feXcnff[nfib`e^j_fgj%:fdY`e\[n`k_Xgfn\i]lc('?Gdfkfi#
mXi`XYc\]\\[iXk\#Xe[)+n`[\ZXgXZ`kp#k_`jn`[\$Y\ckjXe[\ilk`c`q\jj`e^c\g_Xj\gfn\i]fij_fgj
n_\i\*$g_Xj\gfn\i`jleXmX`cXYc\%Fk_\i]\Xkli\j`eZcl[\`e[\g\e[\ekdfkfiZfekifcj#hl`Zb$Z_Xe^\
Y\ck$$jpjk\dn`k_XlkfdXk`ZY\ckk\ej`fe`e^#X`i$Zfekifcc\[XlkfdXk`ZY\ckkiXZb`e^jpjk\d%Pfln`ccXcjf
\eafpXdXZ_`e\n`k_dfkfi`q\[kXYc\_\`^_kZfekifc#X[aljkXYc\X`i$Zfekifcc\[Y\ckfjZ`ccXk`fe#XcfX[
d\k\i#\d\i^\eZpjX]\kpj_lkf]]YXi#Yl`ck$`eX`ii\^lcXkfiXe[]`ck\i#Xe[[lXc[ljkgfikj%
Nff[jkfZb@ek\ieXk`feXc#@eZ%`jZfdd`kk\[kfZljkfd\ijXk`j]XZk`fe`egifm`[`e^k_`jdXelXc%@k`j
fli`ek\ekkfdXb\jli\Xcck_\`e]fidXk`fee\Z\jjXip]fijX]\kp#\Xj\f]Xjj\dYcp#giXZk`ZXclj\Xe[
[liXY`c`kpf]k_`jgif[lZkY\`eZcl[\[%
Nff[jkfZbJ\im`Z\Xe[Jlggfik
N\jkXe[Y\_`e[flidXZ_`e\j@ek_\\m\ekk_XkX[\]\Zk`j]fle[#gXikjXi\d`jj`e^fihl\jk`fej
Xi`j\XYflkpflidXZ_`e\#gc\Xj\ZfekXZkNff[jkfZb@ek\ieXk`feXcJ\im`Z\Xe[JlggfikXk($*-'$.*+$
*+/)fij\e[\$dX`ckf1k\Z_$jlggfik7j_fg]fo%Y`q%Flibefnc\[^\XYc\jkX]]n`cc_\cgpflkiflYc\j_ffk
gifYc\dj#j\e[flkgXikjfiXiiXe^\nXiiXekpi\kliej%
@]pfle\\[k_\cXk\jk\[`k`fef]k_`jdXelXc#pflZXe[fnecfX[`k]ifd_kkg1&&nnn%j_fg]fo%Y`q%
@]pfljk`cc_Xm\hl\jk`fejX]k\ii\X[`e^k_\cXk\jkdXelXc#fi`]pfl_Xm\Zfdd\ekjgc\Xj\ZfekXZkljXk1
Nff[jkfZb@ek\ieXk`feXc#@eZ%
8kke1K\Z_e`ZXcJlggfik;\gXikd\ek
G%F%9fo)*'0
9\cc`e^_Xd#N80/)).

@EKIF;L:K@FE
$*$
@EKIF;L:K@FE
NXiiXekp
Nff[jkfZb@ek\ieXk`feXc#@eZ%nXiiXekjXccE:AB8AJdXZ_`e\ipkfY\]i\\f][\]\Zkj]ifdnfib$
dXej_`gXe[dXk\i`Xcj]fiXg\i`f[f]knfp\Xij]ifdk_\[Xk\f]fi`^`eXcgliZ_Xj\Ypk_\fi`^`eXc
fne\i%K_`jnXiiXekp[f\jefkXggcpkf[\]\Zkj[l\[`i\Zkcpfi`e[`i\Zkcpkfd`jlj\#XYlj\#e\^c`^\eZ\
fiXZZ`[\ekj#cXZbf]dX`ek\eXeZ\#fii\`dYlij\d\ekf]k_`i[gXikp\og\ej\j`eZlii\[%
Nff[jkfZb@ek\ieXk`feXc#@eZ%n`cci\gX`ifii\gcXZ\#Xk`kj\og\ej\Xe[Xk`kjfgk`fe#k_\E:AB8AJ
dXZ_`e\fidXZ_`e\gXikn_`Z_`eefidXclj\_Xjgifm\ekfY\[\]\Zk`m\#gifm`[\[k_Xkk_\fi`^`eXc
fne\ii\kliejk_\gif[lZkgi\gX`[kfk_\E:AB8AJ]XZkfipj\im`Z\Z\ek\ifiXlk_fi`q\[i\gX`i
]XZ`c`kp[\j`^eXk\[Ypfli9\cc`e^_Xd#N8f]]`Z\#n`k_giff]f]k_\`igliZ_Xj\f]k_\gif[lZkn`k_`e
knfp\Xij#Xe[gifm`[\jNff[jkfZb@ek\ieXk`feXc#@eZ%i\XjfeXYc\fggfikle`kpkfm\i`]pk_\Xcc\^\[
[\]\Zkk_ifl^_`ejg\Zk`fe%@]`k`j[\k\id`e\[k_\i\`jef[\]\Zk#fik_Xkk_\[\]\Zki\jlck\[]ifd
ZXlj\jefkn`k_`ek_\jZfg\f]Nff[jkfZb@ek\ieXk`feXc@eZ%jnXiiXekp#k_\ek_\fi`^`eXcfne\idljk
Y\Xik_\Zfjkf]jkfi`e^Xe[i\klie`e^k_\gif[lZk%
K_`j`jNff[jkfZb@ek\ieXk`feXc#@eZ%jjfc\ni`kk\enXiiXekpXe[XepXe[XccnXiiXek`\jk_XkdXpY\
`dgc`\[YpcXn#`eZcl[`e^Xepd\iZ_XekXY`c`kpfi]`ke\jj#]fiXepgXik`ZlcXigligfj\#Xi\_\i\Ypc`d`k\[
kfk_\[liXk`fef]k_`jni`kk\enXiiXekp%N\[fefknXiiXekk_XkE:AB8AJdXZ_`e\ipZfdgc`\j
n`k_k_\gifm`j`fejf]XepcXnfiXZkj%@eef\m\ekj_XccNff[jkfZb@ek\ieXk`feXc#@eZ%jc`XY`c`kple[\i
k_`jnXiiXekp\oZ\\[k_\gliZ_Xj\gi`Z\gX`[]fik_\gif[lZk#Xe[Xepc\^XcXZk`fejYifl^_kX^X`ejk
Nff[jkfZb@ek\ieXk`feXc#@eZ%j_XccY\ki`\[`ek_\JkXk\f]NXj_`e^kfe#:flekpf]N_XkZfd%N\j_Xcc
`eef\m\ekY\c`XYc\]fi[\Xk_#`eali`\jkfg\ijfejfigifg\ikpfi]fi`eZ`[\ekXc#Zfek`e^\ek#jg\Z`Xcfi
Zfej\hl\ek`Xc[XdX^\jXi`j`e^]ifdk_\lj\f]fligif[lZkj%
<m\ip\]]fik_XjY\\edX[\kf\ejli\k_XkXccE:AB8AJdXZ_`e\ipd\\kj_`^_hlXc`kpXe[[liXY`c$
`kpjkXe[Xi[j%N\i\j\im\k_\i`^_kkfZ_Xe^\jg\Z`]`ZXk`fejXkXepk`d\Y\ZXlj\f]fliZfdd`kd\ekkf
Zfek`elfljcp`dgifm\k_\hlXc`kpf]fligif[lZkj%
Jg\Z`]`ZXk`fej
JXe[`e^Dfkfi%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%('?G#,'8dg#))'M#J`e^c\$G_Xj\
JXe[`e^DfkfiJg\\[%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (#.),IGD
=\\[Dfkfi%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(?G#.8dg#))'M#J`e^c\$G_Xj\
=\\[DfkfiJg\\[%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (#.),IGD
<c\mXk`feDfkfi%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (Ð*?G#*8dg#))'M#J`e^c\$G_Xj\
<c\mXk`feDfkfiJg\\[%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (#.),IGD
;ildJg\\[%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% *#,,'=GD
;ild;`Xd\k\i%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%..Ð/
=\\[IXk\j%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (+*Ð+kf+0=GD
JXe[`e^9\ckJ`q\%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ),o-'
KfkXc8dgj8ccdfkfijle[\idXo`dldcfX[ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%-'8dgj
DXo`dldJXe[`e^N`[k_%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% )+*Ð/
DXo`dldJXe[`e^K_`Zbe\jj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%-
D`e`dldJkfZbC\e^k_%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ('
D`e`dldJkfZbK_`Zbe\jj%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (Ð/
=ffkgi`ek%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*0(Ð+n`[\o(0(Ð+[\\g
?\`^_kN`k_[ljkgfikj`ejkXcc\[ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% .(
Fg\iXk`e^8`iGi\jjli\%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%,.GJ@
;ljkGfikjKnf %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+
DXZ_`e\N\`^_k%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% (#-,'cYj

J8=<KP
$+$
I<8;D8EL8C9<=FI<FG<I8K@E>D8:?@E<%
=8@CLI<KF=FCCFN@EJKIL:K@FEJ9<CFNN@CC
I<JLCK@EG<IJFE8C@EALIP%
J8=<KP=@IJK
JkXe[Xi[JX]\kp@ejkilZk`fej
(% K_fifl^_cpi\X[k_\`ejkilZk`fedXelXcY\]fi\fg\iXk`e^pflidXZ_`e\%C\Xiek_\Xggc`ZXk`fej#
c`d`kXk`fejXe[gfk\ek`Xc_XqXi[jf]k_`jdXZ_`e\%B\\gdXelXc`eXjX]\#Zfem\e`\ekgcXZ\]fi
]lkli\i\]\i\eZ\%DXb\jli\Xepfk_\ifg\iXkfij_Xm\i\X[Xe[le[\ijkXe[k_\dXelXcXjn\cc%
)%B\\gnfibXi\XZc\XeXe[n\ccc`^_k\[%:clkk\iXe[`eX[\hlXk\c`^_k`e^`em`k\gfk\ek`Xc_XqXi[j%
*%>ifle[Xcckffcj%@]XdXZ_`e\`j\hl`gg\[n`k_Xk_i\\$gife^gcl^#`kdljkY\gcl^^\[`ekfX
k_i\\$_fc\^ifle[\[\c\Zki`ZXcflkc\kfi^ifle[\[\ok\ej`feZfi[%@]lj`e^XeX[Xgk\ikfX`[`e
XZZfddf[Xk`e^Xknf$_fc\i\Z\gkXZc\#^ifle[lj`e^XjZi\nkfXbefne^ifle[%
+%N\Xi\p\gifk\Zk`feXkXcck`d\j%Lj\jX]\kp^cXjj\jn`k_j`[\j_`\c[jfijX]\kp^f^^c\jk_Xkd\\k
k_\eXk`feXcjX]\kpjkXe[Xi[j#n_`c\fg\iXk`e^k_`jdXZ_`e\%
,%8mf`[[Xe^\iflj\em`ifed\ekj%;fefkfg\iXk\k_`jdXZ_`e\`en\kfifg\e]cXd\\em`ifed\ekj%
8`iYfie\[ljkgXik`Zc\jZflc[ZXlj\Xe\ogcfj`feXe[j\m\i\]`i\_XqXi[%
-%<ejli\Xcc^lXi[jXi\j\Zli\cp`egcXZ\Xe[`enfib`e^Zfe[`k`fe%
.%DXb\jli\jn`kZ_`j`ek_\ÈF==Égfj`k`feY\]fi\Zfee\Zk`e^gfn\ikfdXZ_`e\%
/%B\\gnfibXi\XZc\Xe#]i\\f]Zclkk\i#^i\Xj\#\kZ%
0%B\\gZ_`c[i\eXe[m`j`kfijXnXp%M`j`kfijj_flc[Y\b\gkXkXjX]\[`jkXeZ\XnXpn_`c\fg\iXk`e^
le`k%
('%:_`c[giff]nfibj_fgn`k_gX[cfZbj#dXjk\ijn`kZ_\jfiYpi\dfm`e^jkXik\ib\pj%
((%;`jZfee\ZkdXZ_`e\n_\eZc\Xe`e^#X[aljk`e^fij\im`Z`e^%
@e[`ZXk\jXe`dd`e\ekcp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#N@CC
i\jlck`e[\Xk_fij\i`flj`ealip%
@e[`ZXk\jXgfk\ek`Xccp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#:FLC;
i\jlck`e[\Xk_fij\i`flj`ealip%
@e[`ZXk\jXgfk\ek`Xccp_XqXi[fljj`klXk`fen_`Z_#`]efkXmf`[\[#D8P
i\jlck`ed`efifidf[\iXk\`ealip#D8Pi\jlck`egifg\ikp[XdX^\%
K_`jjpdYfc`jlj\[kfXc\ikk_\lj\ikflj\]lc`e]fidXk`feXYflkgifg\i
fg\iXk`fef]k_\\hl`gd\ek%
EFK@:<