Woosim Systems Inc. PORTI-P340 User manual

http://www.woosim.com
MODEL PORTI-P340
(3inch Panel Printer)
Rev 4.0
All specifications are subjected to change without notice

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
2
All specifications are subjected to change without notice
 Copyright
PORTI-P340 3inch Panel Printer Operator’s Manual.
Copyright ⓒ2017 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written permission of Woosim
System Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should turn the printer
“OFF”, before you connect or removed the cable on the rear side, in order to guard the printer
against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
 Notice
The contents of this manual are subject to change without notice.

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
3
 Introduction
The PORTI-P340 is an extremely simple and functional panel printer.
It is the ideal solution for applications which require the immediate printing of data on a paper,
whether they be of an industrial, professional or laboratory nature.
Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground analyzer, Chemical
analyzer, Metallic analyzer, etc.
The general features of PORTI-P340 printer are as follows:
Very silent printing thru direct thermal printing method.
High speed(50mm/sec, MAX)
High resolution(203dpi : 8dots/mm).
UART(RS-232C or TTL) interface
Support text and graphic printing.
Easier paper loading by CLAMSHELL design.
Easier maintenance with self-diagnostics.
In field programming –Update Firmware, Download Fonts and Logos
Microsoft Windows/Windows CE, Linux, Android compatible
Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
Agency Approvals

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of the
printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature : -10°C to 50°C
◆ Relative humidity : 30% to 85%
● Do not install the printer near devices that generate strong electromagnetic fields such as
a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not other solvent.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
5
 Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
These equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception , which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
6
CONTENTS
1. Outline ................................................................................................................................................................. 7
1.1. Model classifications ..................................................................................................................................... 7
1.2. Product Part Number System....................................................................................................................... 7
1.3. Specifications.................................................................................................................................................. 8
2. Setting up the printer....................................................................................................................................... 9
2.1. Printer & Accessories .................................................................................................................................... 9
2.2. Printer Features.............................................................................................................................................10
2.2.1. Part Name................................................................................................................................................10
2.2.2. Dimension................................................................................................................................................10
2.3. Panel Installation...........................................................................................................................................11
2.4. Replacing the paper roll ..............................................................................................................................12
2.5. Setting operation mode...............................................................................................................................13
2.6. Power supply.................................................................................................................................................14
3. Interface..............................................................................................................................................................15
3.1. UART(RS-232C or TTL) .................................................................................................................................15
4. Using the printer...............................................................................................................................................16
4.1. Control panel ................................................................................................................................................16
4.2. The self test...................................................................................................................................................16
5. Consumable Parts.............................................................................................................................................17
5.1. Recommended paper...................................................................................................................................17
5.2 Printing position ............................................................................................................................................17
6. Revision History ................................................................................................................................................18

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
7
1
1. . O Ou ut tl li in ne e
1.1. Model classifications
1.2. Product Part Number System
PORTI–P340 ( ) ( )
Model name
Interface
None : UART
Power
None : DC 7.5V~8.5V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
8
1.3. Specifications
Item
Specification
Printing method
Direct thermal line printing
Characters per line
- Font A, B, C : 48 / 64 / 72cpl
- KOR, CHN, JPN : 24cpl
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Optional Characters
Alphanumeric:95, Extended Graphics:128X31 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
3-inch (72mm, 576dots)
Printing speed
50mm/sec (MAX)
Dimensions
110.0 x 77.7 x 49.1mm
Weight (w/o roll paper)
117g
Interface
UART(RS-232C or TTL), USB (option)
Paper supplied
Thermal roll paper (80mm wide - 38ø)
Barcode supplied
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows, Linux
H/W spec
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Input Power
DC7.5~8.5V (MAX 9VDC), Standby 60mA and 3A or more
Environment
conditions
Temperature
-10°C ~50°C (operating)
-30°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50Km
< Table 1 >

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
9
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2.1. Printer & Accessories
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
Porti-P340
Thermal roll paper

P340 Rev. 4.0
http://www.woosim.com
2018-07-11
10
2.2. Printer Features
2
2. .2 2. .1 1. . P Pa ar rt t N Na am me e
2
2. .2 2. .2 2. . D Di im me en ns si io on n
[unit : mm]