Wooyoung Telecom HL500M User manual

WOO YOUNG Telecom CO.,LTD.
User’s Manual

FCC STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or tele-
vision reception, with can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment.

1
Contents
1. Before Setting up ································ 3
Brief Specification of LCD Monitor ························· 3
Precautions ····································· 4
Instruetion for Cleaning the Monitor ························ 7
2. Items ········································ 8
3. Setting up the LCD monitor ························· 10
Where is a good place to position the monitor? ················· 10
How to connect the power cord and the several cables to the LCD monitor. ·· 11
Connecting Your LCD Monitor ··························· 12
Plug & Play ····································· 13
Warm-up Time ··································· 13
4. Adjusting The Monitor ····························· 14
The Function Control Buttons ··························· 14
How to use the Hot Key. ······························ 14
Main OSD Menu ·································· 16
COLOR ······································· 17
USER COLOR ··································· 17
OSD FUNCTION ·································· 18
VIDEO ········································ 19
Color········································· 20

2
TV ·········································· 21
Channel ······································· 21
5. Appendix ····································· 22
Appendix A. Display Modes ························· 22
Appendix B. 15-pin D-Sub Connector ····················· 23
DPMS Power Saving Mode ···························· 24
6. Troubleshooting ································ 25

3
Before setting up
1
●Resolution : 15.0 inch XGA (1024 X 768@75Hz)
●Color display : 16,777,216 colors
●DPMS (Display Power Management Signaling)
●OSD (On Screen Display)
●Auto Configuration : Hot key
●DDC 1/2B : Plug & Play
This is 15.0 inch TFT-LCD monitor. Before setting up the LCD Monitor, please read
this manual to help your understanding of the LCD Monitor.
Brief Specification of LCD Monitor
According to PC system, DDC 1/2B may not be supported. If you meet Error
message,check your video card which compatibility with DDC. If you eant to know
more information, please contact our service center.
Notice

4
Precautions
If you hear a noise or smell smoke from the
computer or adaptor, unplug the power cord
immediately, and call the service center.
There is the risk of electric shock or fire.
Do not overload an electrical outlet with
too many devices.
There is the risk of fire.
Do not unplug from the outlet by pulling
the power cord or when your hands are
wet.
There is the risk of electric shock and fire.
Do not use a damaged power cord or
plug. Make sure the plug fits snugly into
the outlet.
There is the risk of electric shock or fire.
AC outlet
Power cord
Do not bend the power cord excessively or place
heavy objects on it. Keep children and pets away
from the power cord as they may damage the power
cord. There is the risk of electric shock and fire.
Warning :
The following information will help you avoid the risk of electric shock, serious injury, and death.
Plug the power cord into a properly
grounded outlet.
There is the risk of electric shock.

5
Do not expose the monitor to the direct
sun light.
Do not block the fan louvers.
There is the risk of fire or damage to the
monitor.
Keep the monitor away from high tem-
perature, humidity, and dust.
■Operating environment=0~40degrees Celsius
■Operating environment=30~80relative humidity.
Do not allow any object or liquid to enter
inside the monitor.
There is the risk of electric shock, fire,
or damage to the monitor.
Do not attempt to disassemble, fix, or modify
the monitor.
There is the risk of electric shock or fire.

6
Do not clean the LCD with abrasive
chemicals.
There is the risk of damage to the LCD.
Use a proper voltage/current level indi-
cated
Do not scratch and damage the LCD
with sharp objects. Keep the monitor away from objects
and electrical appliances that may gen-
erate electromagnetic fields.
Place the monitor on a flat, stable sur-
face. The monitor may fall and there is
the risk of damage or injury
Unplug the power cord when the moni-
tor is not in use for a prolonged period
of time.
Caution :
The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor.

7
Instruction for Cleaning the Monitor
Make sure the power cord is unplugged.
Do not spill or pour liquid on the monitor.
●
Cleaning the LCD panel
1.
Use a clean, soft cloth to wipe off dust from the LCD.
2.
If still not clean, wipe the LCD with a clean soft cloth with a small amount of glass cleaner?
without alcohol or ammonia.
●
Cleaning other parts of the monitor
1.
Use a clean, soft cloth to wipe off dust from the monitor.
2.
If still not clean, wipe the LCD with a clean soft cloth with a small amount of glass cleaner?
without alcohol or ammonia.
●
Caution
Do not use alcohol or ammonia based cleaning products. Abrasive chemicals, such as
alcohol or ammonia, may damage the monitor. The company is not responsible for the
damages to the monitor caused by the use of alcohol or ammonia based cleaning prod-
ucts.

8
Items
2
LCD Monitor
DC Adapter
15-pin D-Sub Signal Cable
User Manual

9
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Notice
RCA Cable Audio Cable
S-Video Cable External TV Box

10
Setting up the LCD monitor
3
Place the LCD monitor on a solid and flat surface. If dropped, the screen can be dam-
aged easily.
Where is a good place to position the monitor?

11
How to connect the power cord and the several cables to the LCD monitor.
No.
1
2
PC AUDION IN
Speaker Cable
External Speaker Cable
SPK OUT
Name Cable connections
3
4
DC12V DC Adaper
15-pin D-Sub Signal Cabie
PC
6
No.
7
8
9
10
DVD/VCR Cable (Yellow)
Audio output(R) (Red)
Audio output(L) (White)
Cable connections
S-Videl Cable
External TV BOX
VIDEO1
AUDIO(R)
AUDIO(L)
Name
VIDEO2
Ext

12
●Connecting your PC system
1. Connect the 15-pin D-Sub Signal Cable from PC to No.4.
2. If you use a speaker, connect the Audio Cable from PC to No.1.
3. If you use a headphone and earphone, connect the Headphone Cable from PC to
No.2.
Connecting Your LCD Monitor
●
Connecting your AV(DVD, VIDEO, CAMCODER) & TV
1. Connect the DVD/VCR Cable from PC to No.6, No.7 and No.8.
2. Connect the external TV box cable to NO.10.
3. Connect the S-Video cable to NO.9.
FCC RF
INTERFERENCE STATEMENT
NOTE :
This equipment tas been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment renerates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to redio commuications. Operation of this equipment in a residential
area is likely to cause hamful interference in which case the will be required to correct the
interference at his own expense.

13
All LCD monitors need time to become thermally stable whenever you turn on the
monitor after letting the monitor be turned off for a couple of hours. Therefore, to
achieve more accurate adjustments for parameters, allow the LCD monitor to be
warmed up for at least 20 minutes before making any screen adjustments.
Warm-up Time
The adoption of the new VESA Plug and Play solution eliminates complicated and
time consuming setup. It allows you to install your monitor in a Plug and Play compati-
ble system without the usual hassles and confusion. Your PC system can easily identi-
fy and configure itself for use with your display. This monitor automatically tells the PC
system its Extended Display Identification Data (EDID) using Display Data Channel
(DDC) protocols so the PC system can automatically configure itself to use the flat
panel display.
Plug & Play
Connecting for TV
●
Connect the external TV Box to Monitors Ext. jack
●
Connect the antenna cable to the external TV Box from wall antenna jack same as the
below the picture

14
Adjusting The Monitor
4
The Function Control Buttons
How to use the function Key.
You can change the display bnode
(PC →Video →S-Video →TV)
1. First click : The OSD main menu appears.
2. Second click : The OSD menu disappears.
1. Select a command function.
2. When you push Auto button, this will optimize image quality automati-
cally.
Volume On/Off button.

15
Move the on-screen highlighted command item to the next one.
1. You can adjust the volume
2. Increase / Decrease the current option value.
Power On/Off toggle button.

16
When you push the menu button, you can see below main OSD menu.
Main OSD Menu
PC Menu
1024 X 768 48.4KHz/ 60Hz
Brightness : Adjusting Brightness
Contrast : Adjusting Contrast
H-Position : Adjusting Horizontal position
V-Position : Adjusting Vertical position
Clock : Adjusting Clock
Phase : Adjusting Phase
Color : Adjusting Color
OSD function : H, V-Position, Language, off timer
Exit Menu
: Select input

17
COLOR
●The tone of color can be changed form bluish white to reddish white.
●Color1 - Blue type
●Color2 - Red type
●RED, GREEN, BLUE - You can adjust red, green and blue values that you want.
Color
1024 X 768 48.4KHz/ 60Hz
COLOR 1
COLOR 2
USER COLOR
Red Gain / Green Gain / Blue Gain : You can adjust red, green and blue values that you want
User Color
RED GAIN
GREEN GAIN
BLUE GAIN
EXIT
USER COLOR

18
Sets the OSD menu display position.
H-Position : Moves the OSD menu to the horizontal direction.
V-Position : Moves the OSD menu to the vertical direction.
Language : Select OSD language. (English, Espanol, Francais, Deutsch, Italiano)
Off timer : OSD display time.
OSD function
H POSITION
V POSITION
LANGUAGE
OFF TIMER
EXIT
OSD FUNCTION
Table of contents
Other Wooyoung Telecom Monitor manuals

Wooyoung Telecom
Wooyoung Telecom U90A User manual

Wooyoung Telecom
Wooyoung Telecom HL510S User manual

Wooyoung Telecom
Wooyoung Telecom U90P User manual

Wooyoung Telecom
Wooyoung Telecom U70D User manual

Wooyoung Telecom
Wooyoung Telecom HL700A User manual

Wooyoung Telecom
Wooyoung Telecom U90W Service manual

Wooyoung Telecom
Wooyoung Telecom HLM151XAR User manual