Worcester GREENSTAR CAMRAY User manual

OFF
TIMED
ONCE
ON
OFF
TIMED
ONCE
ON
HOT WATER CENTRAL HEATING
ADVANCE SET ? ADVANCE
SELECT SELECTYES
USER GUIDE
GREENSTAR CAMRAY
BOILER TEMPERATURE CONTROL
MIN MAX
NORMAL OPERATION
LIGHT OFF
BOILER NOT FIRING,
NO DEMAND FOR HEAT FROM
HEATING/HOT WATER SYSTEM
OR BOILER AT SET TEMPERATURE
LIGHT ON
DEMAND FOR HEAT FROM
HEATING/HOT WATER
SYSTEM
TROUBLESHOOTING
1 CHECK THE OIL LEVEL IN THE OIL
STORAGE TANK
2 PRESS RESET BUTTON (A) BEHIND
FRONT WHITE PANEL (SEE FIG.2).
BOILER SHOULD FIRE
3 IF NO RESPONSE, WAIT 2 MINUTES-
PRESS RESET BUTTON (A) AGAIN
4 IF LOCK OUT LIGHT STAYS ON, DO NOT
ATTEMPT FURTHER RESETS. CONTACT
YOUR SERVICE ENGINEER FOR ADVICE.
BOTH LIGHTS ON - BOILER NOT FIRING
SERVICE 08457 256206
TECHNICAL 08705 266241
LITERATURE 01905 752556
LOCK OUT INDICATOR ON
DEMAND INDICATOR
PLEASE REFER TO THE USERS INSTRUCTIONS AND CUSTOMER CARE
GUIDE FOR FURTHER INFORMATION
1 ENSURE THERE IS A POWER SUPPLY
TO THE BOILER
2 CHECK THE PROGRAMMER IS SET TO
ON AND THE TEMPERATURE CONTROL
IS IN AN OPERATING POSITION.
3 PRESS FLUE OVERHEAT RESET BUTTON
(B) AND BOILER OVERHEAT RESET
BUTTON (C) FOR HEATING BELOW
FASCIA, BEHIND THE FRONT WHITE
PANEL (SEE FIG.2)
4 IF THE DEMAND LIGHT REMAINS OFF,
CONTACT YOUR SERVICE ENGINEER
FOR ADVICE.
BOTH LIGHTS OFF - BOILER NOT ON -
NO HEATING/HOT WATER
8 716 113 003a (01/07)
HEATING TEMPERATURE
CONTROL
DEMAND
INDICATOR
LOCK OUT
INDICATOR
OPTIONAL PROGRAMMER
Refer to programmer guide
FIG.1
REMOVE FRONT PANEL TO
ACCESS RESET BUTTONS
FASCIA
PANEL
PULL BOTTOM
OF FRONT
PANEL OUT
AND LIFT TO
REMOVE
HOLDER FOR
USER GUIDE
FIG.2
ABC

OFF
TIMED
ONCE
ON
OFF
TIMED
ONCE
ON
HOT WATER CENTRAL HEATING
ADVANCE SET ? ADVANCE
SELECT SELECTYES
USER GUIDE
GREENSTAR CAMRAY
BOILER TEMPERATURE CONTROL
MIN MAX
NORMAL OPERATION
LIGHT OFF
BOILER NOT FIRING,
NO DEMAND FOR HEAT FROM
HEATING/HOT WATER SYSTEM
OR BOILER AT SET TEMPERATURE
LIGHT ON
DEMAND FOR HEAT FROM
HEATING/HOT WATER
SYSTEM
TROUBLESHOOTING
1 CHECK THE OIL LEVEL IN THE OIL
STORAGE TANK
2 PRESS RESET BUTTON (A) BEHIND
FRONT WHITE PANEL (SEE FIG.2).
BOILER SHOULD FIRE
3 IF NO RESPONSE, WAIT 2 MINUTES-
PRESS RESET BUTTON (A) AGAIN
4 IF LOCK OUT LIGHT STAYS ON, DO NOT
ATTEMPT FURTHER RESETS. CONTACT
YOUR SERVICE ENGINEER FOR ADVICE.
BOTH LIGHTS ON - BOILER NOT FIRING
SERVICE 08457 256206
TECHNICAL 08705 266241
LITERATURE 01905 752556
LOCK OUT INDICATOR ON
DEMAND INDICATOR
PLEASE REFER TO THE USERS INSTRUCTIONS AND CUSTOMER CARE
GUIDE FOR FURTHER INFORMATION
1 ENSURE THERE IS A POWER SUPPLY
TO THE BOILER
2 CHECK THE PROGRAMMER IS SET TO
ON AND THE TEMPERATURE CONTROL
IS IN AN OPERATING POSITION.
3 PRESS FLUE OVERHEAT RESET BUTTON
(B) AND BOILER OVERHEAT RESET
BUTTON (C) FOR HEATING BELOW
FASCIA, BEHIND THE FRONT WHITE
PANEL (SEE FIG.2)
4 IF THE DEMAND LIGHT REMAINS OFF,
CONTACT YOUR SERVICE ENGINEER
FOR ADVICE.
BOTH LIGHTS OFF - BOILER NOT ON -
NO HEATING/HOT WATER
8 716 113 003a (01/07)
HEATING TEMPERATURE
CONTROL
DEMAND
INDICATOR
LOCK OUT
INDICATOR
OPTIONAL PROGRAMMER
Refer to programmer guide
FIG.1
REMOVE FRONT PANEL TO
ACCESS RESET BUTTONS
FASCIA
PANEL
PULL BOTTOM
OF FRONT
PANEL OUT
AND LIFT TO
REMOVE
HOLDER FOR
USER GUIDE
FIG.2
ABC