Workhorse EMERGENCY User manual

Existing Pump GeneratorSolar Panels Controller and
Charger BatteriesGrid Power
OR
WORKHORSE
WaterSecure
Models: EMERGENCY or DAILY
For use with 200w - 1200w Solar Array or AC Backup
Larger arrays allow more battery charging during the
day for increased pump time at night. Operate Any
110v Pump with Step Down Transformer
Run any existing 220V Single Phase Pump
up to 2HP with solar charged battery bank
Optional grid power (as needed)
WORKHORSE
WaterSecure
Backup - Solar+AC+Battery
Run any existing 220V Single Phase Pump
up to 2HP with solar charged battery bank
System Diagram
Components included in kit

Kits
Included Solar Panels
Kit Components
WORKHORSE
PUMPS
SOLAR
Water Security when the grid goes
down! Finally, Solar charged battery
backup for existing grid-tied well
pumps. The WaterSecure system
allows for the running of a new or
previously installed 110v or 220v
Single Phase on a solar charged
battery bank. Yes! It's finally possible!
All kits come with Solar Panels,
Simple Mounting Brackets, Solar
Pump Controller, Cut-off Switch,
AGM Batteries, Breaker/Fuses,
Wiring, Installation Manual
WORKHORSE
WaterSecure
Backup - Solar+AC+Battery
All Connectors and Wiring Included!
WSHTF (Includes batteries, 200w solar)
WS300 (Includes batteries, 300w solar)
WS600 (Includes batteries, 600w solar)
WS1200 (Includes batteries, 1200w solar)
* GPD Calculated using an average of 5GPM for each pump size Delivery/Lead time is currently 3 weeks.