WorkPro PARLED PRO 64 IP User manual

Thank you for purchasing this product. For your own safety, please read this user manual carefully
before you initially start-up
SAFETY INSTRUCTIONS
◆Every person involved with the installation, operation and maintenance of this device has to :
-be qualified
-follow the instructions of this manual
◆CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
◆This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and warning notes written in this user manual.
◆Important: Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
◆Keep away from heaters and other heating sources!
◆If the device has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
◆Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the power-cord from time to time.
◆If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
◆shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged
to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
◆Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
◆Make sure that the available voltage is not higher than stated in this manual.
◆Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
USER MANUAL
PARLED PRO 64 IP
Alimentación :AC 100-240/47-63Hz
Consumo :230V/50HZ/0.308A/66.1W 120V/60HZ/0.524A/62.5WW
Cantidad de LEDs:18
Canales DMX : 1/2/3/7 CHS (DMX-MODE 1/2/3/4)
Peso :7 KG
Dimensiones :365 296MM
Pza/ W LED3*1
.1
*333 *
Especificaciones Tecnicas
PARLED PRO 64 IP User Manual/Manual de uso Page 1 PARLED PRO 64 IP User Manual/Manual de uso Page 8
Este símbolo en su equipo o embalaje, indica que el presente producto
no puede ser tratado como residuos domésticos normales, sino que deben
entregarse en el correspondiente punto de recogida de equipos electrónicos
y eléctricos. Asegurándose de que este producto es desechado
correctamente, Ud. está ayudando a prevenir las consecuencias negativas
para el medio ambiente y la salud humana que podrían derivarse de la
incorrecta manipulación de este producto. EL reciclaje de materiales
ayuda a conservar las reservas naturales. Para recibir más información,
sobre el reciclaje de este producto, contacte con su ayuntamiento, su
punto de recogida más cercano o el distribuidor donde adquirió el producto.
CH6
CH1
CH2
CH3
CH4
CH5 CH6 CH7
Modo
R
G
B
Modo
Macro
Velocidad
/Strobo Modo MASTER
DIM Funcion
0
0
0
Sin salida
1-255
1-255
1-255
0-13(off)
RGB/Strobo
(0-35) Ajust
colores
NA
NA
NA
14-255(macro)
Strobo 0 -15:
est. estatico
16-255:16 pasos
(0-35)
Ajust. colores Modo Macro
(36-71)
(36-71)
Incrementa la luminancia
(72-107)
(72-107)
Reduce la luminancia
(108-143)
0-7:OFF
8-255 JOIN IN
(108-143)
Incrementa/reduce la
luminancia
(144-179)
(144-179)
Auto mixcolor
(180-215)
(180-215)
3 colores aleatorios
(216-251)
NA
NA
NA
NA
Ajust Veloc.
0 -255:
16 steps
(216-251)
7 colores aleatorios
(252-255)
NA
NA
0-255 =NA
7 colores control.
por audio
(252-255)
Dimmer
0-255:min–max
Luz cambia de acuerdo
al audio
4.DMX mode 4 (7Canales pantalla muestra: 4XXX;XXX= Dirección DMX)
7 colores control.
por audio

the power-cord by the plug. Never pull out the plug by tugging the power-cord.
◆During the initial start-up some smoke or smell may arise. This is a normal process and does
not necessarily mean that the device is defective.
◆DANGER OF BURNING! Never touch the device during the operation! The housing heats
up to the housing temperature TSURFACE.
◆Don't switch the device on and off in short intervals as this would reduce the lamp's life.
◆HEALTH HAZARD! Never look directly into the light source, as sensitive persons may
suffer an epileptic shock (especially meant for epileptics)!
◆Always disconnect from the mains, when the device is not in user or before cleaning it.
◆Please note that damages caused by manual modifications on the device or
unauthorized operation byunqualified persons are not subject to warranty.
◆Keep away children and amateurs from the device!
◆There are no serviceable parts inside the device. Maintenance and service operations
are only to be carried out by authorized dealers.
Operation instructions:
◆This system has DMX Online mode and Stand-alone Mode. Online mode can link other
units and be controlled by the DMX controller. And Stand-alone Mode has the functions of
Sound, Auto Mixcolor and Strobe and so on..
◆Do not receive any DMX Signal under Master/Slave mode. Master:MODE5/6/7/8 Slave:
DMX MODE3.
◆If a DMX signal is present under Online mode, the DMX LED will blink very fast to
indicate. While under Master/Slave mode, Master's LED indicator will light and
Slave's one will blink to indicate.
◆Button Function Description:
Press MODE button to select your
desire mode. And press UP or Down
button to select DMX address, switch
AUTO MODE,adjust the speed value
and select color. Up key is to add value.
Down key is to reduce value.(Note: If
you press UP or DOWN key more than
seconds, you can select quickly.)
D
3
Figura 1
CH1(0-255)
Función
DMX mode 1
Macro
Para seleccionar 36 colores
Figure 3
CH1(0-255)
CH1(0-255) CH1(0-255)
DMX mode 3
R
G
BR/G/B Ajuste luminancia
Figura 2
CH1(0-255)
CH2(0-255)
DMX mode 2
Macro
Luminancia
Selec. 36 colores +ajustar luminancia
MODO DMX:
(Presione UP o DOWN para cambiar la dirección DMX.)
1.DMX mode 1 (1 Canal la pantalla indica : 1XXX;XXX= dirección DMX)
2.DMX mode 2 (2 Canales pantalla indica: 2XXX;XXX= Dirección DMX)
3.DMX mode 3 (3 Canales pantalla muestra: 3XXX;XXX= Dirección DMX)
Función
Función
PARLED PRO 64 IP User Manual/Manual de uso Page 7 PARLED PRO 64 IP User Manual/Manual de uso Page 2
Instrucciones de la pantalla de función:
+Ajust. luminancia
Button name Function description
MODE
UP
DOWN
to select your desire mode
To select DMX address. To run AUTO MODE.
To adjust MODE speed. To select MACRO color.
To select DMX address. To run AUTO MODE.
To adjust MODE speed. To select MACRO color.
MODE Display Function
DMX mode 1 (1CH) 1XXX Macro Mode
DMX mode 2 (2CHS) 2XXX Macro Mode(CH 1)
(CH 2)
DMX mode 3 (3CHS) 3XXX R(CH 1), G(CH2) ,B(CH3)
DMX mode 4 (7CHS) 4XXX Funcion en MODO DMX
Modo audio 5 – S o Cambio de acuerdo a la señal de audio
Modo Macro 6 - XX,(XX=00-35)35 colores + Negro
Modo Auto 7 - XX,(XX=01-06)Configura 6 programas
Paso de audio
8 - 00
N0.
1
2
3
4
5
6
7
8
8 - XX,(XX=01-15)
Ajuste de velocidad
en modo Auto
Corresponde al programa de MODE 7
y puede ajustar 15 valores de velocidad
Cambia un paso despues de recibir señal
de audio, corresponde al programa de
MODE 7

Figure 1
CH1(0-255)
Function
DMX mode 1
Macro
To select 36 colors
Figure 3
CH1(0-255)
CH1(0-255) CH1(0-255) Function
DMX mode 3
R
G
BR/G/B Adjust luminance
Figure 2
CH1(0-255)
CH2(0-255)
Function
DMX mode 2
Macro
luminance
To select 36 colors +adjust luminance
DMX MODE:
(Press UP or DOWN key to change DMX address.)
1.DMX mode 1 (1 Channel Display indicates: 1XXX;XXX= DMX address)
2.DMX mode 2 (2 Channels Display indicates: 2XXX;XXX= DMX address)
3.DMX mode 3 (3 Channels Display indicates: 3XXX;XXX= DMX address)
?
?
?
?
RIESGO PARA LA SALUD. Nunca mire directamente a una fuente luminosa, las personas sensibles
pueden sufrir ataques epilépticos.
Tenga presente que los daños causados por modificaciones manuales en la unidad o usos no autorizados,
no están cubiertos por la garantía.
Mantenga a los niños o personas no cualificadas, apartadas de la unidad.
No hay elementos de control para el usuario en el interior de la unidad. El mantenimiento y reparación
de la misma, debe ser llevado a cabo por personal autorizado.
Instrucciones de Uso:
Este sistema tiene un modo de funcionamiento DMX y Stand-alone. Pueden ser conectadas
varias unidades entre si y controladas vía DMX. El modo Stand-alone tiene funciones de
audio, Auto mixcolor y strobo.
No se recibe señal DMX bajo modo Master/esclavo. Master: MODE 5/6/7/8 Esclavo: DMX mode 3.
Si hay señal DMX , el LED DMX parpadea rápidamente para indicarlo. En modo Master/Esclavo
el LED Master se encenderá .
Descripción de los botones de función
Presione la tecla MODE para seleccionar
el modo deseado. Presione UP o DOWN
para seleccionar la dirección DMX,
conmutar a modo Auto, ajustar el valor de la
velocidad y seleccionar el color. La tecla UP
se usa para aumentar el valor y DOWN para
reducirlo. Si se pulsan durante más de 3 segundos
aumenta la velocidad de selección.
PARLED PRO 64 IP User Manual/Manual de uso Page 3 PARLED PRO 64 IP User Manual/Manual de uso Page 6
Display Function Instructions:
MODE Display Function
DMX mode 1 (1CH) 1XXX Macro Mode
DMX mode 2 (2CHS) 2XXX Macro Mode(CH 1)
+Adjust luminance(CH 2)
DMX mode 3 (3CHS) 3XXX R(CH 1), G(CH2) ,B(CH3)
DMX mode 4 (7CHS) 4XXX Function in DMX MODE sheet
Sound Mode 5 – S o Light changes as the sound signal.
Macro Mode 6 - XX,(XX=00-35)35 colors +Black
Auto Mode 7 - XX,(XX=01-06)To set 6 programs
Sound Step
8 - 00
Change one step after receiving music
signal, corresponding to the
program of MODE7
N0.
1
2
3
4
5
6
7
8
8 - XX,(XX=01-15)
Adjust the speed
of Auto Mode
Corresponding to the program of
MODE7, and can adjust 15 value speed
Botón Descripción de la función
MODE
UP
DOWN
Selecciona el modo deseado
Seleccionar dirección DMX. Ejecutar AUTO MODE
Ajusta velocidad MODE. Selecciona el color MACRO
Seleccionar dirección DMX. Ejecutar AUTO MODE
Ajusta velocidad MODE. Selecciona el color MACRO

Power Input :AC 100-240/47-63HZ
Power Consumption :230V/50HZ/0.308A/66.1W 120V/60HZ/0.524A/62.5WW
LED Amount:18
DMX Channel : 1/2/3/7 CHS (DMX-MODE 1/2/3/4)
Weight :7 KG
Dimension:365 296MM (L W H)
Pcs/ W LED3*1
.1
*333 * * *
Technical specification
MANUAL DE USO
Instrucciones de Seguridad:
?
?
?
?
?
PRECAUCION. Sea cuidadosa con su manipulación. Con un voltaje peligroso puede sufrir descargas
eléctricas al tocar los cables.
Este dispositivo ha dejado nuestras instalaciones en perfectas condiciones. Con el fin de mantener este
estado y asegurar un uso seguro, es absolutamente necesario que el usuario sigua las normas de seguridad
y notas escritas en este manual.
Importante: Los daños causados por la no observancia de los avisos contenidos en este manual, no están
cubiertos por la garantía, no haciéndonos responsables de cualquier defecto o problema por esta causa.
Mantenga la unidad apartada de estufas o cualquier otra fuente de calor.
Si el dispositivo ha estado expuesto a drásticas fluctuaciones de temperatura (p.ej. durante el transporte)
, no encienda la unidad inmediatamente. La condensación puede dañar la unidad.
?
?
?
?
?
?
La conexión eléctrica debe ser llevada a cabo por personal cualificado.
Asegúrese que el cable de red nunca se pinza o daña con bordes afilados. Compruebe el dispositivo y
el cable de forma periódica.
Si el cable externo del efecto se daña, debe ser sustituido exclusivamente por el fabricante o su agente
con el fin de evitar riesgos.
Pantallas o lentes deben ser sustituidas en el caso de mostrar daños visibles que reduzcan su eficacia
como roturas, arañazos, etc.
Nunca deje que el cable de red entre en contacto con otros cables. Maneje el cable y todas las
conexiones de red con particular cuidado.
Asegúrese que el voltaje de entrada no es superior al marcado en el manual.
This symbol on the product or on its packaging indicates that this product
shall not be trated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical an electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of amterials will help to conserve natural
resources. For more detailed information sabout recycling of this product,
please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
PARLED PRO 64 IP User Manual/Manual de uso Page 5 PARLED PRO 64 IP User Manual/Manual de uso Page 4
PARLED PRO 64 IP
Gracias por adquirir este producto. Por su propia seguridad, lea cuidadosamente este manual antes
de poner en marcha la unidad por vez primera.
CH6
CH1
CH2
CH3
CH4
CH5 CH6 CH7
Mode
R
G
B
Macro
Mode
Speed
/Strobe Mode MASTER
DIM Function
0
0
0
No out
1-255
1-255
1-255
0-13(off)
RGB/Strobe
(0-35) Adjust
colors
NA
NA
NA
14-255(macro)
Strobe 0 -15:
static state
16-255:16 steps
(0-35)
Adjust colors Macro Mode
(36-71)
(36-71)
To increase the luminance
(72-107)
(72-107)
To reduce the luminance
(108-143)
0-7:OFF
8-255 JOIN IN
(108-143)
To increase or reducethe
luminance
(144-179)
(144-179)
Auto mixcolor
(180-215)
(180-215)
3 colors random shows
(216-251)
NA
NA
NA
NA
Adjust Speed
0 -255:
16 steps
(216-251)
7 colors random shows
7 colors sound
controlled
(252-255)
NA
NA
0-255 =NA
7 colors sound
controlled
(252-255)
Dimmer
0-255:min–max
Light changes as
the sound signal
4.DMX mode 4 (7Channels Display indicates: 4XXX;XXX= DMX address)
Table of contents
Languages:
Popular Spotlight manuals by other brands

Kemo Electronic
Kemo Electronic M120 quick start guide

American DJ
American DJ FS-2500 DMX User instructions

BETOPPER
BETOPPER Spot Light user manual

Viewpoint
Viewpoint 20004 owner's manual

Hubbell
Hubbell prescolite RLF6 instruction sheet

Silicon Solar
Silicon Solar PatioPal-GS-SpotLight-36 operating instructions