World Market BONNIE 618917 User manual

BONNIE BLACK/GOLD METAL FLOOR LAMP
SKU - 618917
Assembly Instructions
Page 1
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS PERTAINING TO THE
ASSEMBLY OF THIS FLOOR LAMP, PLEASE CONTACT THE NEAREST WORLD
MARKET STORE. IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER
SERVICE CALL CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
ALL PRODUCTS SOLD AT WORLD MARKET
ARE NOT FOR COMMERCIAL USE AND ARE INTENDED FOR
RESIDENTIAL USE ONLY
2022.06.30

Component List
Hardware List
Tool List
Phillip
Screwdriver
2
T1
H1
Not
Included
Page 2
Leg
Picture Qty
1
1
Label
B
AMetal Shade With Pipe
Description
Screw
(L-12MM, Ø-8MM)

FOR YOUR SAFETY : Do not plug the unit in until completely installed and assembled.
Assembly Steps
ELECTRICAL FITTING : Professional installation is recommended.
Step -2
Page 3
Insert Bulb into the socket and tighten by rotating in clockwise direction as shown in image.
Remove any plastic wrapping on metal shade before use. (Note:Bulb Not Included)
A
Assembled View
Step -1
First, align legs (B) & Metal Pipe with shade (A) & tighten the screws (H1) with the help of
the Screw Driver (T1: not included).
T-1 H-1
A
B

Page 4
CAUTION:
WARNING:
Do not turn on lamp until light bulb is installed and assembly is complete.
CARE AND MAINTENANCE:
- Do not polish or clean fixture with harsh cleansers or polish as it may damage the finish
- Do not place fixture outside, for indoor use only.
- Not for commercial use, for residential use only.
- Clean Dust & Spills using a dry, non-colored, lint free soft cloth
To reduce the risk of fire,use maximum 7 Watt Type A lamp or maximum 7 Watt self-ballasted CFL or
lamp adapter.