World Video Sales MicroImage Video Systems SWP2061 User manual

SWP2061
Operation Manual
S-Video 1x6
Passive Video Switches
MicroImage Video Systems
division of World Video Sales Co., Inc.
P.O. Box 331
Boyertown, PA 19512
610-754-6800
Fax [phone]
[email protected]
www.mivs.com
Page 2
Contents
Specifications
Specifications ...............................Page 2
Unpacking ..................................Page 3
Connections ................................Page 3
Video ................................Page 3
In case of difficulty ...........................Page 3
Warranty ..................................Page 4
Returns ....................................Page 4
Rev 0 09-30-1998
Inputs / Outputs 6
Common 1
Input level 1.0Vpp, 75 Ùtypical - 10Vpp max.
Output level Same as selected input
Connectors 4 pin mini-DIN female
Bandwidth Greater than 12Mhz
Temperature
Operating 0E-40EC (32E-104EF)
Storage -40E-60EC (-40E-140EF)
HumidityOperating 10% -90% (non-condensing)
Storage 5% -95% (non-condensing)
Size 6.3" (w) x 5.1" (D) x 1.9" (H)
160 mm (w) x 130 mm (D) x 48 mm (H)
Weight 12 oz.
Manufactured in the USA by MicroImage Video Systems

Page 3
Unpacking
Connections
In case of difficulty
The SWP2061 package includes the following items:
SWP2061 Passive Video Switch unit
This operation manual
Please inspect all items carefully and report damaged or missing
items to your dealer or MicroImage Video Systems.
Video
Connect the video sources (i.e. video cameras) to the IN/OUT
connectors on the switch unit. Connect the COMMON signal from
the switch unit to the video display. Unused inputs may be left
unconnected.
The switch will only provide a 75 ohm termination for the
selected video signal. Non-selected signals are not terminated.
If you are experiencing problems with your MicroImage product,
you can contact us in one of the following ways.
Mail MicroImage Video Systems
a division of World Video Sales Company, Inc.
P.O. Box 331
Boyertown, PA 19512
Phone [phone]
Fax [phone]
Email [email protected]
Web www.mivs.com
Page 4
Warranty
Returns
MicroImage Video Systems warrants that each SWP2061 is free from
defects due to faulty materials or improper workmanship for a period of
one (1) year. MicroImage Video Systems further warrants that any part
which proves defective in materials or workmanship within one (1) year ,
will be replaced or repaired at no cost to the user. Labor to replace
defective parts will be done without charge, provided the equipment is
returned to MicroImage Video Systems prepaid, insured and properly
packaged. Prior return authorization must be obtained from MicroImage
Video Systems.
NOTE
This warranty covers the MicroImage SWP2061 Passive Video Switch
only.
CONDITIONS
This warranty is void if the warranted part has been altered or subjected
to abuse or misuse. Defective parts must be returned to MicroImage
Video Systems.
SOLE WARRANTY
This Warranty is in lieu of all other warranties expressed or implied
including, without limitation, any implied warranty or any implied
warranty of fitness for a particular purpose. MicroImage Video Systems
shall have the final right to determination as to the existence and cause
of any defect and its appropriate adjustment in accordance with the
terms of this warranty. In no event shall MicroImage Video Systems be
liable for any consequential or collateral damages.
All returns MUST have an RMA number. Please call, fax or email
for an RMA form. The RMA form will have the proper shipping
address for returns.
Phone [phone]
Fax [phone]
Email [email protected]