Wozart Mini User manual

Installation guide
Wozart Switch Controller Mini
Installation Guide Version 2.0
Updated on 22/12/2020

Welcome
2
This Guide will walk you through the installation of Wozart Switch Controller Mini.
We hope you enjoy your purchase. We at Wozart have carefully crafted a reliable,
durable and secure Smart Home product. We promise to toil harder to build
awesome devices that make life simpler and planet more livable.
We hope our association continues and grows stronger with each passing day. You
are awesome for supporting the change we wish to bring in the way people live.
For configuration video, scan the QR code below
For iOS devices
For Andorid devices
As Wozart app is frequently updated, there may be changes to this manual. Please
refer to www.wozart.com/support for the latest version of the manual.
Download Wozart app from Google play store or App store.

Table of Contents
What’s in the box 4
Technical Specificaons 5
Descripon 5
Setup Guide 7
Troubleshoong 9
Warranty & Service 10
Precauons 6

What’s in the box
Wozart Switch Controller Mini
Switch connector
Setup Code Sticker
Warranty Card
XXXX
XXXX
4
aura

Descripon
Technical Specificaons
Wozart Switch Controller Mini is a smart device that turns electrical appliances
or circuits on and off. The device fits behind your standard wall switchboard
and can be controller either using voice commands or app interfaces on smart
controller devices or through physical switches.
5
Power Supply 100-240 V ~ 50/60 Hz
2
150 W per channel
Resisve and Inducve
0-40°C
0- 95 % RH without condensaon
Wi-Fi 2.4 GHz 802.11
85 mm * 58 mm * 20.5 mm
104 Gms
WASI03
Number of Loads
Rate Load Waage
Compable load types
Operang Temperature
Ambient Humidity
Communicaon Protocol
Weight
Model
Dimensions
(Height*Width*Depth)

6
aura
47 mm 21 mm
47 mm
Precauons
• The device is designed to control electrical devices operating on AC voltage,
faulty connection or use may result in fire or electric shock.
• Do not power the device before full installation and assembling it in the switch
board.
• Do not handle the device with wet or moist hands.
• Do not modify or alter the device in any way not included in this manual
• Do not use in damp or wet locations, near shower, swimming pool, sink, or any
where else where water or moisture are present
• Always use the same power source for device and loads
• Do not connect appliances that are not to the specification mentioned in this
document.

7
Setup Guide
Load connections
Switch off the main power supply
• Connect neutral wire behind switchboard to terminal N of Wozart Switch
Controller Mini.
• Connect live wire behind switchboard to terminal P of Wozart Switch
Controller Mini.
• Connect electrical appliances to terminals L1 and L2.
• Make sure that no other electrical connections are made to the switches
connected with the Wozart Switch Controller Mini. connector.
• If you do not have basic electrical wiring knowledge, please get help of an
electrician or contact us.
Terminal for Neutral Wire
N
Terminal for Live Wire
P
Terminal for 1st appliance
L1
Terminal for 2nd appliance
L2
Switch Connector slot
SW

8
Switch connecons
• Plug switch connector provided in the box to the switch socket of Wozart Switch
Controller Mini.
• Following are the colours of the wires that have to be connected to the physical
switches and the respective loads they control.
• Verify the connections and assemble the device inside the switchboard.
• Turn on the main power supply to the device and proceed with configuration on the
app.
Ground Switch 1
(Load 1)
Switch 2
(Load 2)
Switch 1 Switch 2
STATUS
N P L1 L2
Aura Switch
aura
Serial Number
xxxxxxxxxxxxx
XXXXXXXXX
XXXX
XXXX
Neutral
Live
110-240 V AC
Load
1
Load
2

Troubleshoong
9
The device isn’t responding
a) Check if the Wi-Fi router is functioning properly
b) Reconnect your smart controller device
eg: Phone to Wi-Fi network to which Wozart device is connected.
c) Switch off the main power supply of the room that has the device for 5 seconds
and then switch it back ON.
d) Do factory reset as explained below and reconnect the device.
Normal Reset
Switch off the main power supply of the room that has Wozart device to be reset or toggle
switch connected to slot L1 eight times.
Factory Reset
Toggle switch connected to slot L2 of switch connector eight times continuously then you
hear a buzzing sound.
Note: If factory reset is done all your customization is lost. Do it only if required.
Not able to scan the QR sticker as it is damaged.
Use the Spare QR Sticker provided in the Wozart Switch Controller Mini box or
enter the code manually.

10
Warranty and Service
This Wozart device can be replaced in full for one year from date of purchase in case
of damage or malfunction due to manufacturing defects. This Warranty does not
cover cosmetic damage or damage from accident, neglect, misuse, alteration or
abnormal conditions of operation or handling. Wozart Technologies or any of it licen-
sors are not liable for any special, incidental, consequential or indirect damages or
losses arising from any cause.
Resellers are not authorized to extend any other warranty on Wozart’s behalf.
Service for all Wozart products will be provided for device life time. To obtain
service, contact nearest authorized reseller or Wozart Technologies Private Limited