6) A pop-up appears with “Test” button when the Universal IR recognise the
button press of the physical remote.
7) Place the Universal IR in line of site with the AC that you are learning
and tap “Test”.
8) Another pop-up appears with two options:
“Not Worked” and “Confirm”.
9) If AC is powered on after tapping on “Test”, then tap “Confirm”.
10) If it doesn’t work, tap on “Not Worked” and repeat steps 1 to 9.
Power OFF:
12) Tap on ”Thermo” remote.
13) Long press on the “Power OFF” button on Wozart app.
14) A pop-up appears, tap “Learn”.
11) Turn on your AC with the physical remote.
15) Point your physical AC remote at Universal IR and press the power button
on the physical remote.
16) A pop-up appears with “Test” button when the Universal IR recognise the
button press of the physical remote.
17) Place the Universal IR in line of site with the AC that you are learning
and tap “Test”.
18) Another pop-up appears with two options:
“Not Worked” and “Confirm”.
19) If AC is powered off after tapping on “Test”, then tap “Confirm”.
20) If it doesn’t work tap on “Not Worked” and repeat steps 11 to 19.
10
