WS 901 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Instruction Booklet
Instruction Logic:
Simple to Read Simple to Understand and
Simple to Put Together
If you need help please call us Monday thru Friday
from 8:00AM to 5:00PM EST
1-317-804-9160
how to put it together:
Wild Sports would like to take the pain out of
assembling this chair. We hope with this simple to
read and understand that you will be enjoying more
time in your chair and less time putting together.

parts included
G. Silver Wrench* 1 Use on Screw D
F. Black Wrench* 1 Use on Screw A and B
4 Use on Chair Bottom Screw B
E. Black Washers
D. Black Washers 8 For Use with Screw A
C. Silver Bolts .70 inches long 3 Use to Secure Headrest to Chair
B. Black Bolts .78 inches long 4 Use on Chair Bottom w/Washers
A. Black Bolts .98 inches long 8 Use on Chair Arms
letter description amount usage
headrest
back
padded arm
seat
seat plate assembly
base
caster
gas lift and telescopic cover
parts assembled
*Note save these tools as bolts may loosen during use.
You should tighten once a month.

With the underside of the Seat facing upwards,
attach the Seat Plate Assembly to the bottom of
the Seat using the (B) 4 Black .78 inch Bolts with
(E)1 Black Washer per bolt and tightening with
the (F) Black Wrench. Note the seat plate is
marked with an arrow. This arrow should be point-
ing to the front of the chair seat.
With the chair’s Back facing toward you, attach the Head-
rest to the top of the chair Back using the (C) 3 Silver .70
inch Bolts lightly screw in each bolt, before tightening
make sure that the headrest is level to the top of the chair.
Once you have it at you desired position continue
and tightening the 3 bolts with the (G)Silver Wrench.
Align Gas Lift with Telescopic Cover
and Insert Firmly into the Center of the
Base.Insert the 5 Casters into their
respective base holes.
Take Each Padded Arm and attached them to the
chair Seat side using the (D) 8 Black .98 inch
Bolts, (4 per side per arm) and tightening with the
(F) Black Wrench.
Make sure that the Padded Armsare placed on
the proper side of the chair, they’re clearly marked
as user right.
parts assembly
E
C

now you can take a seat
No two people are exactly alike. We are all built dierently. The good news is that this chair is not built
that way. You have the ability to change your personal seating preferences, see diagram below. You can
ne-tune the chair to your exact seating comfort.
Seat Height
To raise the seat lean slightly forward while seated to relieve the pressure on
the tilt mechanism. Reach under the left side of the chair and locate the
handle. Pull up on the handle and raise yourself up slightly to allow the chair
to reach your desired height. To lower the seat remain seated and lift the
handle upwards until the chair lowers to your desired height.
Operate the Tilt Lockout
Tilt lockout locks the chair in the upright position only.
Pulling the handle all the way out allows the hair to tilt.
Pushing the handle in locks the chair in the fully upright position.
Tilt Tension Adjustment
Grasp the round knob looted in the base plate under the front of the chair
bottom.
To make the seat rmer and stier – turn the knob clockwise.
Adjust to the desired tension.
To make the seat softer and looser – turn the knob counter clockwise.
seat adjustment
Congratulations hopefully Wild Sports put a little simplicity into your life. Thanks for supporting your favorite
team and school. Also thank you for being one of our growing owners of Wild Sports Team Chair Collection.
To see the other new and interesting products from Wild Sports check us out our website at
www.wildsports.com or go to our Facebook site and let us know what you think.
Now sit back and enjoy your chair.

W
ild Sales LLC Office Chai
r
1
Y
ea
r
Limited
W
arranty
W
ild Sales LLC
warrants its products to be free from defects in material and work
m
anship as described belo
w
.
W
ild Sales LLC
will, at its option, repair
or replace without cha
r
ge (excluding freight cha
r
ges), defective products or part
s
during the following warranty periods.
1
Y
ears all non-moving metal components
1
Y
ears swivel/tilt mechanisms and resin, steel and aluminum chair b
a
ses
1
Y
ears wood and plastic components, upholstery materials and Pneum
a
tic lift
W
arranty is available to original purchaser onl
y
.
This warranty shall be e
f
fective as stated above from the date of purchase as indicated on the original sales
receipt.
This warranty is your sole remedy for product defects and excludes def
e
cts caused by or arising from abuse or misuse, user modification,
negligence or accident, or if the customer fails to perform the necessary mainten
a
nce.
The customer is responsible for maintenance including minor
assembl
y
, cleaning, and lubrication and assuring that all hardware is securely fa
s
tened.
There are no warranties, expressed or implied, other than those
specifically described, including without limitations any implied warranty of m
e
rchantability or of fitness for a particular purpose.
W
ild Sales LLC
will not
be responsible for incidental or consequential damages. Some States di
f
fer on exclusion of incidental or consequential damage, so the stated limitations may
not apply to you.
This warranty gives you specific rights.
Y
ou may have other rights which vary from state to state.
For Questions or Customer Service Contact
Customer Service [phone]
www.wildsports.com
warranty/disclaimer