Wulian ZigBee WL-DS-C Series User manual

Wireless Touch Dimmer Switch series User Manual
1
Copyright notation
©
2012 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.
Wulian，is the trademark and registered trade mark of Nanjing
IOT Sensor Technology Co., Ltd. The other products mentioned in this
article or company names may be the trademark or trade name of their
respective owners.
Before installing and using the products, please read user manual carefully,
which will help you use the products for better.
The pictures in the manual are just for your information. If some pictures
have differences with material object, the material object is final.
The content in the manual is protected by copyright law legislator. It
strictly prohibits any forms of copying, passing, distributing and storing
any content of the manual without prior, written, consent of the instructor
of Nanjing IOT Sensor Technology Co., Ltd.

Wireless Touch Dimmer Switch series User Manual
2
When using, if the practical situation of the product is different with that
in the manual, or if you want to get more information, or you have any
questions or ideas, please contact us as below:
Ⅰ. Production introduction
Wireless Touch Dimmer Switch series, based on ZigBee technology,
are capable of satisfying users’ expectations on different light
atmosphere through remote control achieved by cellphone, tablet and
some other smart mobile terminals.
Except for smart home system, this series of products can also be
applied in smart building, smart hospital, smart hotel, smart

Wireless Touch Dimmer Switch series User Manual
3
Ⅱ. Function features
Support Zigbee HA protocol
ZigBee device type：Router
Trendy yet delicate appearance
Simple installation and flexible operation
Customized according to individual preferences
breeding etc.
（
This brochure takes 2
-
way touch dimmer switch for
example
）

Wireless Touch Dimmer Switch series User Manual
4
Ⅲ. Function illustration

Wireless Touch Dimmer Switch series User Manual
5
LED
Indicator
Multifunction Key
Multifunction Key
LED Indicator

Wireless Touch Dimmer Switch series User Manual
6
Ⅳ. Installation steps
1. Connect this product with the wire of the wall box;
1-way
2-way
PE
Protect the earth
A
1-way output load
1-way output load
B
∕
2-way output load
N
Null Line Input
L
Live Line Input

Wireless Touch Dimmer Switch series User Manual
7
Note: Please make sure that the power has been turned off before
installation!
Dangerous, non-professionals are prohibited operating
without authorization.
2. Fasten the base of this product inside the wall box with 2 screws,
same installation method with the ordinary wall switch;
3. Shut down the decorative cover for the final installation.

Wireless Touch Dimmer Switch series User Manual
8

Wireless Touch Dimmer Switch series User Manual
9
Ⅴ. Application methods
1. Networking Setup
(1) It can be used just as an ordinary switch, or matched with
communication gateway;
(2) Quickly click【multi-function key】4 times to join ZigBee
network. LED indicator flashes when it is searching the network.
；
The single click time