WURM DSP100-05 User manual

DSP100-05
Product information
DSP100-05_V1.1_PI_2021-01_EN Subject to technical changes Page 1 of 2
Front view
Remote display for cold locations, display height 14mm
Features
Display of representative wares temperature of the associated field module
Status displays for cooling, defrosting and fan
Snap-in installation in refrigeration units
Connection to field module by 0.5m cable with prefabricated plug
Writing conventions
Symbol
Meaning
WARNING
Avoid the described hazard: otherwise there is danger from electric voltage
that could lead to death or serious physical injury.
For your safety
For safe operation and to avoid personal injury and equipment damage through operator error, always
read these instructions, become familiar with the device, and follow all safety instructions on the
product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG Elektronische
Systeme. Keep these instructions ready to hand for quick reference and pass them on with the device
if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of improper use or use for
other than the intended purpose.
Target group
These instructions are intended for "service technicians".
Intended use
The DSP100-05 is a remote display for cold locations.
WARNING
Danger to life from electric shock and/or fire!
Connection of the device should be carried out only by a qualified electrician.
Use only the correct tools for all work.
Never expose the device to moisture, for example due to condensation or cleaning
agents.

Take the device out of operation if it is faulty or damaged and is therefore compromising
safe operation.
Do not open the device.
Do not repair the device yourself. If the device requires repairs, send it in with an exact
description of the fault.

DSP100-05
Product information
Page 2 of 2Subject to technical changes DSP100-05_V1.1_PI_2021-01_EN
Wurm Infocenter
paperless info
Version and validity of documentation
Version
Date
V1.1 and
higher
2021-01 Documentation status
Any software versions not listed are special solutions for individual projects and are not described in detail in this document.
This document automatically ceases to be valid if a new technical description is issued.
Manufacturer: Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
You can find more information on our website at www.wurm.de
Installation
Install the temperature display module in a section of the furniture panel or in a separate control box in
the cold room.
Next plug the connector plug into the corresponding socket of the field module until it audibly clicks
into place.
Dimensional drawing of installation section
Dimensional drawing of front
Technical data
Power supply
From field module or DSP-Booster
Display
4-digit 7-segment display, LED, red, 14mm,
Status displays for cooling, defrosting, fan
Connection
0.5m connecting cable with prefabricated plug
Dimensions
(WxHxD) 88 x 32 x 25mm
Fastening
In the installation section (71 x 29mm), ZDAR
Ambient temperature
Operation: -25...+55°C, storage: -25…+70°C
Ambient humidity
Operation and storage: 0…90%rH, non-condensing
Weight
About 250g
CE conformity
EU conformity as defined in
−2014/30/EU (EMC Directive)
RoHS II
Valid from
Version 1.1
NOTICE
Please observe the detailed descriptions in the chapters of the FRIGOLINK system
manual.