X10 MR26A User manual

X10WirelessTechnology,Inc.LIMITED1-YEARWARRANTY
X10.com,adivisionofX10WirelessTechnology,Inc.(X10)warrantsX10productstobefree
fromdefectivematerialandworkmanshipforaperiodofone(1)yearfromtheoriginaldateof
purchaseatretail.X10agreestorepairorreplace,atit’ssolediscretion,adefectiveX10product
if returned to X10 within the warranty period and with proof of purchase.
If service is required under this warranty:
1. Call1-800-675-3044orvisitwww.x10.com,ore-mail[email protected]toobtainaReturn
Merchandise Authorization (RMA) number.
2. Return the defective unit postage prepaid to X10 (see address on back).
3. Enclose a check for $4.00 to cover postage and handling.
4. Enclose a dated proof of purchase.
5. X10 is not responsible for shipping damage. Units to be returned should be packed
carefully.
Pleasevisitwww.x10.com/warranty
tocompleteyouron-linewarrantyregistration.Thankyou.
RFSerialFireCrackerReceiver,ModelMR26A
INSTALLATION INSTRUCTIONS
The MR26A RF serial Interface connects to a serial port on your
PC. It receives wireless Radio Frequency (RF) commands from
X10 remote controls and motion sensors and passes the
commands to your PC. These commands are then interpreted by
Boom, X Ray Vision, MultiView, WebView or other software
applications from X10.
1. Shut down your PC and plug the MR26A into any unused
serial port.
2. If you are using an X10 FireCracker Interface, plug the
FireCracker into your serial port, and then plug the MR26A
into the FireCracker. Restart your PC.
3. Download the desired software application from:
www.x10.com/software
4. Refer to the installation instructions and/or the help file for the
software application you are using the MR26A with.
For more information, please visit:
www.x10.com/support
MR26A-9/01
F.C.C. CAUTION -THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCETHATMAY
CAUSEUNDESIREDOPERATION.
NOTE:NOCHANGESORMODIFICATIONSMAYBEMADETOTHE
UNITS. ANYCHANGESMADETO THEUNITSWILL VOIDTHE
USER'SAUTHORITYTOOPERATETHEEQUIPMENT.