Xcruiser X5665OHD User manual

All manuals and user guides at all-guides.com

all-guides.com

Table of Contents
Brief introduction :
1. S a fe ty p re c autions 1
2. Main f eature s 2
3. F ront panel a nd func tions 3
4. O pera tions a nd M anage me nt 4
5. Main m enu o pera tion d e s c ription 5
5.1 F ind 5-7
5.2 S pec trum 7
5.3 L is t 7-8
5.4 E dit s atellite 8
5.5 E dit tra ns ponde r 9
5.6 S etup S ys tem 9-11
6. Upda te a pplic ation s ys tem 11
7. C ha rge i ndic a tor 12
8. Te c hniq ue s pe c ific a tio ns 12
9. Atta c hments 12
This type of digital satellite nder is a simple and convenient
instrument to install and adjust satellite dish . As digital satellite
nder, it is necessary to input corresponding satellite paramet -
ers , such as L O frequency of LNB , Down F requency , symbol
rate, etc.
It can be used as an indicator to adjust satellite dish , feedhorn
position and polarizing angle so that help the best dish installa-
tion.
All manuals and user guides at all-guides.com

1
Please read this user 's guide carefully , especially for the
rst time users .
Do not touch the LCD display by hand .
Do not place heavy items on the device .
Keep this unit away from the heat , direct sunlight , strong
mechanical vibration , or dusty places . Clean the surface
with a dry and soft cloth . Do not pour any liquid to void
serious injury .
Keep the unit in a ventilated place .
Please contact your supplier if any failure occurs .
Operate properly per this user 's guide , otherwise any
damage of the unit is at the user 's risk .
Specications are subject to change and improvement
without notice. Please inquire of manufacturer if there 's
any need after the usage .
1. S afety p rec a utions
1. T he b atte ry i s o nly a pplic a ble t o the c ha rger w hic h s up-
plied o r a ppointe d b y the m anufac ture r o f this m a c hine.
2. T he c ha rging time s hould b e m inimum 5 h ours f or the
f irs t time, and i t s hould n ot be c ha rged o ver 1 2 h ours
a fte r the f irs t time.
3. T he b atte ry s hould b e s tore d w ithin a t emperature r ange
o f 0 to 4 0
4. When s tored f or a l ong p eriod, c ha rger the b a ttery a t
l e as t onc e p er m onth s o a s t o p re vent ove r d is c ha rge.
5. P roduc ts p lac e d for a l ong time t o c ha rge o nc e e very
t hre e m onths .
6. T he b atte ry i s e xpenda ble.
N otic e :
All manuals and user guides at all-guides.com

2
2. Main features
1 S upport DV B -S, DVB -S 2
2 S upport s pe c trum f unc tion
3 S upport 0/2 2K H z ., DIS E qC 1.0 , U S ALS
4 S upport unic a ble L N B
5 B uild i n h ighlight L E D
6 S how the s ig na l q ua lity o n n ixie t ube
7 B uild i n b uz ze r
8 S upport to c hec k t he p ower c able a utoma tic ally
9 S upport to r es et to d efaults
10 L C D s c reen s hows s ignal s trength q ua lity, power, ME R ,
T P T ype , F E C , B E R , e tc .
11 T he u nit of s igna l p owe r s upport dbm, dbuv
12 U S B 2 .0 f or s oftwa re u pdate, bac k up s ate llite p ara m-
e ters
All manuals and user guides at all-guides.com

3
3 Front panel introduction and function description
9
8
7
10 1
2
3
4
5
6
1 S ignal I nput
2 D C i nput
3 U S B p ort
4 C ompas s
5 Indicator
6 LCD
7 Nixie tube
8 LED switch
9 Buttons
10 P ower Switch
P O W E R
C H A R G E 22K 1 8V
LO C K
All manuals and user guides at all-guides.com

4
4. Operations and Management
Power: It lights on when the power on
Change : It lights on when change the battery
22K : Indicate the 22K signal
18V : Indicate the 18V output for LNB
Lock : It lights on when the signal is locked
LED switch : Switch the highlight LED
Compass : Indicate the direction
MENU : Direct go to main menu
EXIT : Press this button to step back , or cancel current
parameter modifying .
OK : Use this button to enter a submenu or save a new
setting after adjustment ; press it to enter parameter
setting.
: Move cursor up /down/left/right, Page up /down,
change the parameter settings .
P O W E R C H A R G E 2 2 K 18 V LO C K
All manuals and user guides at all-guides.com

all-guides.com

5
5. Main menu ope ra tion des c ription
When p ower o n, the s c re en w ill d is pla y s ome i nformation
about s oftware, then e nter to the m a in m enu.
5.1 F ind
In this m e nu, it is d is pla y the s igna l s trength a nd q uality
ac c ording to t he p aramete rs t hat us er s e lec ted o r e dite d,
he lp u s er to a djus t the d is h.
All manuals and user guides at all-guides.com

6
The buzzer can be turned on or o by Buzzer item.
Move cursor to SQ and press [OK ], it will display
signal strength and quality progress bar as below.
Set USALS parameter ON , press [OK ] on this parameter
to enter USALS function as below :
S ate llite N a me: C hinas a t6B
Longitude: 180.0
Dire c tion: E AS T
Tra ns ponde r: 03880(V)27500
Move: W E S T
G oto: XX
S et L imit: E AS T
S: 57 % Q: 45 %
Longitude: S a tellite l ongitude.
Dire c tion: S a te llite d ire c tion
Move: To d rive t he m otor to r ota te d is h a ntenna pre s s
[ ][ ] to s e lec t e as t or w es t, pres s [O K ] onc e w ill r ota te
one s te p, pres s a nd h old w ill r otate c ontinuous ly.
G oto: R ota te to t he t arget a utoma tic a lly, pres s [O K ] to
e xec ute
X X : R ota te d is h a nte nna t o c orre s ponding s atellite
automa tic a lly
Z E R O : R ota te t o 0 s c a le
All manuals and user guides at all-guides.com

7
Set Limit: Set rotation limit, select LEF T , RIGHT
or CLEAR and press [OK ] to execute .
E.g. rotate motor to an east direction angle , then select
EAST and press [OK ], this angle location will be EAST
rotation limit, motor will not be able to rotate over this east
limit. Select CLEAR to cancel limit.
5.2 S pec trum
In this m e nu, the s trength o f input s igna l will d is pla y i n
gra phic m ode.
Press [ ] [ ] to move cursor , press [ ] [ ] to change the
range of signal strength display , current frequency and
signal strength is shown on top , press [OK ] to pause .
5.3 L is t
5.3.1 Manual Check
S elec t the d es ired s ate llite a nd c orres ponding trans pon-
der, it will s how the s igna l d eta il informa tion, inc lude s tre -
ngth, quality, ty pe , F E C a nd B E R .
All manuals and user guides at all-guides.com

8
Press [ ] [ ] to change satellite
Press [ ] [ ] to change transponder
5.3.2 A uto C hec k
T his f unc tion i s u s e d for f inding w hic h s ate llite that s elec -
ted h a s b e en c onnec ted t o the l ine q uic kly a nd e as ily. It
will s top s witc h s ate llite a nd l ight L oc k L E D w hen the
s igna l h a s b e en l oc ked.
In a u to-c hec k
01 T ha ic om5
Press [OK ] to search next satellite
5.4 S at
In this m e nu u s e r c an a dd, modify o r d e lete t he s a tellites ,
inc luding s a tellite n ame, LO f re que nc y , 22 K H z DiS E q C
1.0 U S ALS a nd s ate llite l ongitude a c c ording t o s e lf req-
uirements .
E d i t S a te l l i t e
Add S ate llite
Modify S a tellite
Dele te S atellite
01 0 3 840 ( H ) 2 750 0
T Y P E : D V B -S
F E C : 3 /4
B E R : 0 . 00 E -0 0
All manuals and user guides at all-guides.com

9
5.5 T P
In this m e nu u s e r c an a dd, modify o r d e lete t he t ra ns pon-
ders , inc lud ing t ra ns p onder f reque nc y , s ymbol r a te a nd
polarity.
E d i t T r a n s p o n d e r
Add Tra ns ponde r
Modify T rans ponder
Dele te Tra ns ponder
5.6 S etup
T his m enu c onta ins s ome a uxilia ry f unc tions a nd u s er d a ta
manage me nt
5.6.1 B a c k u p D a ta
You c a n b a c k u p s a tellite d ata t o U d is k b y this m e nu.
5.6.2 U pdate D ata
You c a n u pda te s ate llite d ata f rom U d is k b y this m enu.
Note: Only the txt format le which named XS 6650H D
can be identied , and must write as below . (There is a blank
line at last )
All manuals and user guides at all-guides.com

all-guides.com

10
01 mea ns t his l ine i nforma tion i s a bout s atellite.
T he s eria l number o f the s ate llite, it mus t be c ontinuous ,
c an n ot from 01 to 03 .
S a tellite n a me. T he length is t en. If the n ame o f the s ate -
llite i s s a t01, the third m us t be 00000s at01 .
T he L O F req o f the s ate llite.
R epres ent 22K H z s igna l s tatus . 0mea ns O F F , 1
me ans O N.
R e pre s ent D iS E qC 1.0 s tatus . 0mea ns O F F , 1
me ans L N B 1, 2mea ns L NB 2, 3mea ns L NB 3,
4mea ns L N B 4.
2014 -9-2 13 :50:29
XS6650HD
01 01 00CHina 6B 05150 0 0 0 115.5 0
001 001 01 03951 09520 1
001 002 01 03880 27500 0
01 02 Koreasat 5 11300 1 0 0 113.0 0
001 003 02 12647 28000 1
01 03 0000NS S 11 Univ 0 0 0 108 .2 0
001 004 03 12537 41250 1
01 01 00China 6B 05150 0 0 0 115 .5 0
12 3 4 5 6 7 8 9
All manuals and user guides at all-guides.com

12 3 4 5 6
001 001 01 03951 09520 1
11
001 means this line information is about TP .
The serial number of the TP , it must be continuous , can
not from 01 to 03 .
The number means this TP is belong to which satellite
have the same number ..
Transponder frequency
Symbol Rate .
Polarity. 0means H , 1means V .
R e pre s ent U S AL S s tatus , 0 mea ns U S AL S O F F, 1
me ans U S ALS O N .
S a tellite L ongitude .
S a te llite l oc a tion. 0mea ns e a s t, 1me ans w e s t.
5.6.3 R es et to F a c tory
Us er c a n r es et the s a tellite d ata t o d efa ult in this m enu.
5.6.4 C alc ulation A ngle
T he f unc tion c a n c alc ula te a ntenna e le vation, a zimuth a nd
LN B p ola riza tion a ngle a c c ording to s a tellite l ongitude,
loc al l oc a tion l ongitude a nd l a titude p aramete r s ettings ,
it is u s eful for r e c eiving i ns talla tion.
All manuals and user guides at all-guides.com

12
The letter E , W, Nand S means east long -
itude, west longitude , north hemisphere and south hemisphere
respectively . Move cursor to the letter , and press
[ ] [ ] to select .
The angle data can be calculated and displayed automat -
ically when parameter is being set . Elevation angle is cou -
nted from horizon upward , azimuth angle is from north
clockwise .
5.6.5 S et C ompens ation
5.6.6 Select P ower's Unit
S elec t the u nit of s igna l leve l.
5.6.6 C hange the c olor
S elec t the b ac k g round c olor, text c olor a nd c urs or c olor.
6 U pda te a pplic ation s ys tem
T he p roduc t c an u pdate a pplic a tion s ys tem f rom U S B p ort,
if y ou wa nt to u pdate a pplic a tion s ys tem, ins e rt U d is k, pr-
e s s L E D s w itc h k e y a n d c o nn e c t p o we r s u p ply u n til th e
s c reen d is pla y a s b elow.
S et the s igna l s tre ngth's c orrec tion v a lue(1200,-41)
Sat Longitude:
Local Longitude:
Local Latitude:
PARAMETER SETTING
130.0 E
22.2 N
113.3 E
PolarizationAzimuth Elevation
All manuals and user guides at all-guides.com

13
9 Atta c hme nts :
P owe r s upply x1
Instruction Manual : x1
F type connector : x1
Select File
01 XS6650HD .bin
Press OK to update .When the system is complete up -
dating, the system will restart .
7 C ha rge i ndic a tor
G re en l ed o n:F ully c ha rg ed
Red led on :In charging
Red led ash :No battery or battery error
8 Te c hnique s pec ific a tions
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

all-guides.com
Table of contents
Other Xcruiser Measuring Instrument manuals