Xenarc PMB-1029 User manual

PMB-1029 Panel Mount Bracket for 1029 series
monitors

Description
Panel Mount Bracket for 1029 series for Panel Mount Industrial Monitors and Touch Screens.
1. Remove two M2.6*5 scres from the bottom of the L bracket.
2. Place the monitor into the PMB-1029 Panel Mount Bracket.
3. Secure teh monitor to the PMP-1029 Panel Mount Bracket by fastening two M2.6*5 screws into
the left side, two M2.6*5 into the right side, and re-install the two bottom M2.6*5 screws that you
removed from step one.
4. Create a shortcut on the wall or panel where you want to mount the monitor and install the monitor
into the cutout.
5. Install the eight mounting hardware into the PMB-1029 Panel Mount Bracket as shown in the
diagram below.
6. Fasten the eight M4*20 screws to secure teh PMB-1029 Panel Mount Bracket onto the wall or
panel.
Related Products:
1029GNH
1029CNH
Function Diagram
Panel Mount Bracket for 1029 series monitors
Image not found
http://www.xenarcdirect.com/image.php?type=FD&id=17735