XENO NITRO XVDHDA28V12Q-1080 User manual

Model
Weight
Video output
Waterproof standard
Storage temperature
Operate Temperature
1075g
XVDHDA28V12Q-1080
SMART(COLOR,B/W)
Low/ Middle / High
-10 ~50 RH90% MAX℃ ℃
Sensor
Video format
Sync code
S/N Ration
Mini-illumination
AGC
White Balance
OSD
Voltage
Current
Lens
Size
Day/Night
Shutter Speed
NR
Backlight
IR range
Effective Pixels
Max.transmission distance
Video Frame Rate
DAY/NIGHT
1080P Sensor
PAL/NTSC
ON/OFF
Internal
Support
DC12V
More than 50dB(with AGC OFF)
0Lux (IR ON)
2.8-12mm HD Lens
CVBS/AHD/TVI/CVI
IP66
2DNR(8(1-10))
1920(H)x1080(V)
300M
ATW/AWB
-20℃~70℃
25/30fps@1080P
400mA±15%(IR ON);105mA±15%(IR OFF)
1（1-10）
Support ICR
DESCRIPTION
ATTENTION
SPECIFICATION
DIMENSION(MM)
FEATURES
*Specifications subject to change without notice. EN-M02-572C-20150820
Thank you for your purchasing this product. Before attempting to connect or
operate this product, please read these instructions carefully and save this manual
for future use.
CAUTION
RISK OF ELE CTRIC
SHOCK D O NO T OPE N
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVIC EA BLE PARTS INSIDE. REFER
SERVIC IN G TO QUALIFIED SERVICE PERSONNEL
1.
is DC12V.
2.
3.
4
5.
6.
7.
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the appropriate
power. Wrong connection may cause malfunction and/or damage to the video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove.
Use a mild detergent and wipe gently.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.Use a
piece of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightobjects that
causes mear to appear irrespective of whether the camera is operating or not.
This can damage the sensor.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise
on monitor screen may happen.
XVDHDA28V12Q-1080
The Xeno XVDHDA28V12Q-1080 vandal resitant dome offers full HD resolution,
and can transmit its image use in AHD / TVI /CVI and CVBS formats over 300m
of RG59 coax, with no delay or loss of image quality. The dome is rated to IP66,
and the IR LEDs ensure crystal clear images 24 hours per day.

★
several times higher and service life longer than
ordinary LED’s
Long-life IR LED design, whose brightness is
★2.0Megapixel high performance CMOS sensor with 25/30fps@1080P.
★Built in IR-CUT, ensure the camera work properly both day and night.
★IP66 waterproof standard.
★SMART-IR, 20 meters IR range.
★Image transmission up to 300 meters.
20m
101mm(H)*139.9mm(Φ)
101
101
53.2
137.7
46
84
139.9
Video mode switch operation and attention:
When camera is powered and connect to default DVR, keep
press OSD cable for 3 seconds to switch video.
Direction UP LEFT RIGHT
Video AHD TVI
CVBS
DOWN
CVI

O S D M E N U
AE
SET UP
WB
DAY-NIGHT
VIDEO SETTING
SAVE-EXIT
EXIT
RESET
BRIGHTNESS
EXPOSURE
EXPOSURE MODE
GAIN
RETURN
10(1-10)
GLOBE(BLC )
OFF(HIGH,MIDDLE,LOW)
LV
BLC
3(0-8)
MODE
WB
RETURN
ATW(MWB)
RGAIN
MWB
BGAIN
16(1-20)
18(1-20)
MODE
DAY/NIGHT
RETURN
SMART(COLOR,B/W)
CONTRAST
VEDIO SETTING
SHARPNESS
COLOR GAIN
DNR
LANGUAGE
RETURN
FORMAT
3(1-10)
1(1-10)
7(1-10)
8(1-10)
PAL(NTSC)
ENGLISH
Set Up
Press the menu button into the main menu “Set Up”, can set the following
parameters.
1. Exposure
Move the cursor to “AE”, and press the menu button into the submenu
“Exposure” , set the following parameters as needed.
2. WB
Move the cursor to “WB”, and press the menu button into the submenu
“WB” “MWB” , set the following parameters as needed.
3. Day&Night
Move the cursor to “Day&Night”, and press the menu button into the submenu,
set the following parameters as needed.
4. Video Setting
Move the cursor to “Video Setting”, and press the menu button into the submenu,
set the following parameters as needed.