XENO XEDHDA28V12Q-1080 User manual

Specification
Model
X
EDHDA28V12Q-1080
Image Sensor 1/2.9" SONY 2.4MP CMOS
Sensor
Resolution 1080P
Si
g
nal S
y
stem PAL
/
NTSC
Min Illumination 0.001 Lux/F1.2
S/N Ratio More than 50dB
S
y
nc S
y
stem Internal
IR Distance 20 Meters (with14μx 24PCS
Infrared LED)
IR Power On Photodiode
A
UTO Control
Video Output
A
HD/CVI/CVBS/TVI
Power/Current DC12V
(
+/-10%
)
/700m
A
Lens 2.8-12mm Manual Zoom
Lens
Dimension
(
mm
)
Φ131 x 93
(
H
)
Wei
g
ht
(g)
800
Operating
Conditions
-10~+50ԨRH95% MAX
Accessory list
Type Qty
Camera 1
User Guide 1
Camera connections
Safety instructions
1.Before using the camera ,please read this
manual carefully and keep it safely for later use.
2.Installation should be proceed by professional
service and follow manufacturer’s instructions, do
not dismantle without authorisation.
3.In order to prevent sensor ,do not expose lens to
intense light source in long time.
4.Do not touch sensor directly. Please covers the
dustproof cover when the camera is not being
used.
5.Please use a dry soft cloth to clean the camera.
If dirt difficult to clean, use detergent with water
and wipe dry the camera.
6.Do not install camera under air conditioning’s air
gate ,or else lens blur with condensation of
moisture.
7.Please ensure that all electric power sources are
turned off when not open , installation ,clean, etc
operation.
8.Please transporting , using and storing the
camera in allowable temperature and humidity.
9.If the camera was broken, for example power
cord or plug damaged, Splash liquid or foreign
matter fall into camera, raining, wetting, etc can’t
work situation, please contact manufacturer or
maintenance centre (modify and maintenance
without permission, you must be responsible for
the problems).
XEDHDA28V12Q-1080
Installation and user guide
Thank you for choosing to use this
Xeno High Definition Analogue
camera.
Before providing power for the camera,
please read this manual carefully
before use.
Note:
Do not attempt to disassemble the camera. If the
camera does not work, please your supplier.

Main Features
Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The colour
camera can produce high definition picture in low Lux
conditions.
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The colour
camera’s AES speed can reach 1/100,000s.
Gama
Camera Gama characteristic is 0.45.
Scanning Mode
NTSC or PAL mode.
Switch the output signal by OSD button
Press “left” key after 5 seconds then release : CVBS
Press “right” key after 5 seconds then release : TVI
Press “up” key after 5 seconds then release : AHD
Press “down” key after 5 seconds then release : CVI
Menu structure
AE BRIGHTNESS/EXPOSURE
MODE/GAIN
WB
A
TW/MWB
DAY NIGHT SMART/COLOR/BW
VIDEO
SETTING
CONTRAST/SHARPNESS/
COLOR
GAIN/DNR/FORMAT/
WDR
LANGUAGE ENGLISH / FRENCH /
RUSSIAN/ SPANISH /
ITALIAN
RESET
SAVE &
EXIT
EXIT
Trouble shooting
> No Picture after providing power
May be the power supply voltage abnormity, please
check the power supply voltage and polarity
Please check all the connecting cable and monitors
whether be connected correctly or not.
> The picture background colour changes
continuously. The fluorescent lamp’s electromagnetic
field can cause colour roll.. Reduce the fluorescent
lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
Use power supply external sync. camera can also
help.
Note:
This camera is designed for internal use only,
The operating temperature is -10~+50Ԩ